This Glycol Makeup Tank is fabricated entirely from ASTM A240-304 stainless steel and is rated for 0 psig at 150°F. The tank has a 1,000 gallon capacity and measures 48″ I.D. x 10′-8″ seam-to-seam. The stand pictured behind is also fabricated from stainless steel and measures 11′ high. The customer ordered six additional units and all the Makeup Tanks underwent leak testing prior to shipment.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

This high pressure knock-out drum has a 2.5″ thick shell fabricated from ASTM SA516 Grade 70, and a SA105 and SA350 carbon steel flange. The drum has a 48″ diameter, a total length of 15’8″ and weighs over 23,000 lb. It underwent a hydro-test and design test per ASME section VIII-1 “U” stamp vessel prior to shipment.

Do you require a vessel or knock-out drum for your project? Get pricing today!

48" I.D. ASME Code Process Vessel

48" I.D. ASME Code Process Vessel

This process vessel has an inside diameter of 48″ and measures 60″ tangent to tangent. The overall height of this vessel is 81″, and measures 120″ including the legs. It is fabricated from 1/2″ 516-70 carbon steel material. This vessel is designed and fabricated according to ASME Section VIII Div 1 codes. It has a capacity of 500 gallons with an internal design pressure of 50 PSIG. The maximum acceptable working pressure is 178 PSIG. This process vessel was heat treated for stress corrosion resistance in the field and 100% x-ray tested and hydro-tested at 231 PSIG prior to being shipped to the customer. This vessel was designed for the customer as a replacement vessel for one in the field that had already provided 20 years of service in a mildly corrosive environment.

Sweco Fab, Inc. worked with the customer to provide a vessel that was even more efficient than the previous one by including 1/8″ thicker walls, an additional 12″ between tangents, heat treatment, an internal drip plate, and an OSHA compliant ladder and platform.

Want to learn more about pressure vessels and tanks? Watch a Sweco Fab webinar now!

ASME Code Pressure Vessels

These molecular sieve vessels are designed for a biofuel production line. They are fabricated from stainless steel with carbon steel base rings. The vessels have an outside diameter of 24″ and measures 214″ in length. The maximum allowable working pressure is 123 PSIG @ 400ºF. These ASME Code pressure vessels were hydro-tested at 160 PSIG and x-ray tested prior to being shipped to the customer.

Do you require ASME pressure vessels or tanks? Let us price them for you today!

48" Carbon Steel Pressure Vessel

Pressure Vessel
- Diameter: 48″ O.D.
- Capacity: 1,100 Gallons
- Material Fabricated From: Carbon Steel
- Design Temperature & Pressure: 285 PSIG at 100ºF
- Testing: Hydro-Tested and held for 1/2 hour at 428 PSIG

Do you have a need for a pressure vessel? Get pricing on a vessel today!

7 Foot Long Pressure Vessel for a Chemical Plant

This pressure vessel measures 84″ in length and is fabricated entirely of SA516-70 carbon steel. It is designed for low temperature environments and has a design pressure of 117 PSIG at 500ºF. A hydrostatic test was completed at 205 PSIG prior to shipment.

Do you have a requirement for a pressure vessel in your plant? Get pricing today!

26″ Hot Water Expansion Tank

- Material: .25″ Thick Carbon Steel
- Design Pressure: 50 PSIG
- Design Temperature: 200 F
- Capacity: 170 Gallons

Do you require a vessel or tank for your current or upcoming job? Get pricing today!

Pressure Vessel in an Emergency Situation for a Gas Company in Florida

- 24″ Diameter Horizontal Pressure Vessel
- Repaired Welds on Flange & Shell
- 12 hr. Turn Around Time
- Hydro-Tested at 1500 PSI
- Held for 1 hr. at 80˚F
- 100% X-Ray

Do you require a pressure vessel or tank for your application? Get pricing today!

Pressure Vessel for a Chemical Company

Top of Pressure Vessel

This pressure vessel is manufactured from carbon steel SA516-70. Its diameter is 48 by 96 tangent to tangent and weighs 2,140 lbs. The pressure vessel is used as a process feed tank and was painted for rust resistance. In addition, the vessel was designed for pressures at 15 PSIG and temperatures at 86F. Hydro-tests were conducted at 20 PSIG and x-ray tests were completed to ensure quality performance.

Do you require a tank or vessel for your current job? Get pricing now!

60" Diameter Air Tank for a Manufacturing Facility

Side View of Air Receiver Tank

Sweco Fab, Inc. recently fabricated an Air Receiver Tank for a Manufacturing Facility in Alabama. This 5,400 lbs tank measured 60″ 143″ tangent to tangent and was designed for 170 PSIG and 200 F. It was fabricated from SA516-70 carbon steel. The interior and exterior were painted with standard epoxy paint to provide an interior lining and exterior protection. The tank was hydrotested at 221 PSIG to ensure product quality.

Want to learn more about products from Sweco Fab? View a past webinar today!