Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Support Assembly Components — The Pipe Supports Blog

Custom Hold-Down Pipe Clamps Designed for a Natural Gas Facility

June 10th, 2013 Comments off

Custom Hold-Down Pipe Clamps Designed for a Natural Gas Facility

PT&P designed custom hold-down pipe clamps for pipe sizes ranging in diameters from 6″ to 14″ at a natural gas facility. The HD-3 is an arrestor type hold down used when there is very low thermal movement and these clamps are similar to them but differ due to their adjustable bases. These clamps are fabricated from galvanized carbon steel and include a neoprene lining to absorb vibration.

30″ Dia. Adjustable Pipe Saddle Supports Designed for an Oil Refinery

March 10th, 2013 Comments off

30" Dia. Adjustable Pipe Saddle Supports Designed for an Oil Refinery

These custom adjustable pipe saddle supports were designed for an oil refinery in Michigan. They will support 24″ and 30″ diameter pipes and range in height from 40″ to 42″. The pipe saddles can be vertically adjusted by turning the middle section of the seamless pipe and the base plates have been pre-drilled to accept anchor bolts. They are fabricated from carbon steel with a red oxide finish to protect against corrosion and were shipped within two weeks.

47 Hold-Down Pipe Clamps Designed for a Coal Fired Power Plant

February 25th, 2013 Comments off

47 Hold-Down Pipe Clamps Designed for a Coal Fired Power Plant

PT&P designed and fabricated forty-seven hold-down pipe clamps for a coal fired power plant in Louisiana. The hold-downs are fabricated from carbon steel and range in size from 2″ to 10″ in diameter. The HD-3 is an arrestor type hold down used when there is very low thermal movement. Its radius is lined with a belting material that is well designed to absorb shock from vibration.

Adjustable Pipe Saddle Supports Designed for 12″ to 14″ Dia. Pipe Sizes

December 31st, 2012 Comments off

Adjustable Pipe Saddle Supports Designed for 12" to 14" Dia. Pipe Sizes

These Fig. 46 adjustable pipe saddle supports are designed for pipe sizes 12” to 14” diameter for an oil refinery. They are fabricated from carbon steel and are capable of supporting up to a 4,920 lb. load. A total of twelve supports were fabricated, quality inspected and tested prior to shipment.

36 Custom Designed Pipe Saddles for a Power Plant

September 4th, 2012 Comments off

Thirty-six custom designed pipe saddles were created for a power plant in Mississippi. These 20″ W x 72″ L x 30″ H saddles were made with carbon steel with PTFE slide plates. These pipe saddles were designed to support a load of 55,000 lb. and will be applied to fluid bed duct supports.

HD-2 and HD-3 Hold-down Pipe Clamps with PTFE Slide Plates

July 30th, 2012 Comments off

HD-2 and HD-3 Hold-down Pipe Clamps

Designed for 20″ to 30″ pipe sizes, these HD-2 and HD-3 hold-down pipe clamps were shipped to a gas pump station in South Dakota. The hold downs were fabricated from carbon steel with PTFE, 25% glass filled liners on the saddle portion and base of the pipe clamp. We fabricated a total of 22 hold down pipe clamps and shipped this rush job within one week.

Custom Instrument Supports Fabricated from Carbon Steel with a Hot Dipped Galvanize Finish

November 21st, 2011 Comments off

Custom Instrument Supports Fabricated from Hot Dipped Galvanized Carbon Steel

These custom instrument supports are fabricated from carbon steel with a hot dipped galvanize finish. The supports vary in heights up to 5′ and widths from 18″ to 24″. A total of 126 stands will be used to support instruments at an oil refinery. PT&P offers a complete line of adjustable and welded instrument supports in various mounting styles.

Custom Instrument Supports Fabricated from Hot Dipped Galvanized Carbon Steel

Do you see a need for instrument supports in a current or future  project of yours? Get pricing today! request-a-quote


Heavy Duty Yoke U-Bolt Pipe Clamps for a Continuous Catalyst Regeneration Plant

November 14th, 2011 No comments

Heavy Duty Yoke U-Bolt Pipe Clamps for a Continuous Catalyst Regeneration Plant

These custom heavy duty Fig. 43 yoke u-bolt pipe clamps are designed for manifold piping in a Continuous Catalyst Regeneration plant in Mexico. The yoke clamps are for a 36″ diameter pipe size and are fabricated from A240 Grade 316 stainless steel. They are designed to support a load of 33,731 lb. and temperatures up to 1100°F. PT&P supplied a total of 16 assemblies, comprised of yoke u-bolt clamps and E-type constant springs, for this project.

Do you need yoke u-bolt clamps or constants? We would be happy to provide you with a quote today. request-a-quote


Upcoming Webinar: Design, Application & Installation of Pipe Clamps

November 3rd, 2011 No comments

To view the recording, visit www.pipingtech.com/webinar

Subject: Design, Application & Installation of Pipe Clamps

** Webinar is worth 1 PDH Credit for TX Professional Engineers

Date: Thursday, November 17, 2011

 

Pipe ClampsThis presentation is on Pipe Clamps, including Hold-Down Clamps, Riser Clamps, Clevis Hangers, Yoke U-Bolt Clamps and Structural Supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications. Finally, view the value-added services offered by PT&P and rest assure that your pipe clamp needs can be covered by our 24×7 web-based emergency services, field services and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 13 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

 

Adjustable Pipe Saddle Supports Designed for a Booster Pump Station Rehabilitation Project in Florida

May 2nd, 2011 No comments

Adjustable Pipe Saddle SupportsAdjustable Pipe Saddle Supports

 

 

PT&P designed adjustable pipe saddle supports fabricated from A240 Gr 304 stainless steel, for a Booster Pump Station Rehabilitation Project in Florida. The pipe saddles are stanchion type supports designed for 10″ and 16″ pipe sizes, and can be vertically adjusted +/- 3″ by turning the middle section of the seamless pipe.

Looking for adjustable pipe saddles for your application? We’d be happy to serve your needs!

request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy