Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Support Assembly Components — The Pipe Supports Blog

230 lb. Double Cable Clamp for an Oil Refinery

March 12th, 2004 No comments
230 lb. Double Cable Clamp for an Oil Refinery

230 lb. Double Cable Clamp for an Oil Refinery

Piping Technology and Products, Inc. recently fabricated a 230 lb. double cable clamp assembly for an oil refinery in Kentucky. This cable clamp assembly, fabricated from 304 stainless steel, consists of a double clamp, a steel support structural, and a base plate. The double cable clamp with an overall dimension of 22 x 12 x 6 is designed for a 2.4 and a 3.8 dia. armored cable.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!


access-our-webinar-archives



48 Pipe Saddle Supports for a Utility Company

January 23rd, 2004 No comments
48 Pipe Saddle Supports for a Utility Company

48 Pipe Saddle Supports for a Utility Company

Piping Technology and Products, Inc. designed and manufactured over fifty saddle supports for a utility company in Glent, Kentucky.  These structural supports were built for 48, 26 and 14 field pipes. Their dimensions range from 50 to 75″ in height and 24 to 36 in width. The structural supports were manufactured from A-36 structural steel and were coated with a custom paint as per customer request.

Do you require pipe saddles in your piping system? Let us price them for you now!

request-a-quote


Two Hundred HD-2 Hold Down Clamps

December 26th, 2003 No comments
Two Hundred HD-2 Hold Down Clamps

Two Hundred HD-2 Hold Down Clamps

PT&P designed and manufactured two hundred and thirty HD-2 hold down clamps to fit 6” to 8” pipes at a chemical refinery. These hold down clamps are used on pipe lines where there is a high temperature and great thermal movement requirements, they allow axial movement and restrain lateral movement at the same time. The clamps are fabricated from carbon steel with 3/32” PTFE, 25% glass filled, bonded to the radius. The plates are manufactured from three layers of materials; 3/32” PTFE, 25% glass filled, 1/2” thick fabric belting material and carbon steel.

Want to learn more about hold down clamps? View a past pipe clamp webinar now!


access-our-webinar-archives



72” Roller Stands for a Cooling Tower

December 3rd, 2003 No comments
72” Roller Stands for a Cooling Tower

72” Roller Stands for a Cooling Tower

PT&P fabricated heavy-duty roller stands, 60” and 72” in diameter, to support large pipes in a cooling tower. The roller stands support loads up to 60,000 lbs. while allowing the pipe axial movement during temperature fluctuation. To reduce friction the rollers are fabricated out of machined carbon steel. The round bar and the stands are fabricated from A-36 carbon steel plate.

Do you require roller stands in your piping system? Let us price them for you today!
request-a-quote


Three Segments 120° 72” diameter Saddle Support with Neoprene Backing

November 14th, 2003 No comments
Three Segments 120° 72” diameter Saddle Support with Neoprene Backing

Three Segments 120° 72” diameter Saddle Support with Neoprene Backing

PT&P fabricated various sized saddle supports used to support water mains for the city of Houston.  The pipe saddles, ranging from 30”-72” in length and 12” in width are made to cover 1/3 of the pipe’s circumference. They are made of A-304 stainless steel with a neoprene backing.

These saddles are used to provide a sliding surface between metal water mains and concrete base supports at fault crossings. The neoprene backing helps to dissipate any shock loads and provides an anti-skid surface at the fault crossing locations.

Do you require pipe saddles in your piping system? Get pricing today!

request-a-quote


42” Hold Down with Wedge Support

October 3rd, 2003 No comments

 

42” Hold Down with Wedge Support

42” Hold Down with Wedge Support

PT&P designed and fabricated a Hold Down with wedge support for a 42” pipe. The entire assembly is PTFE, 25% glass filled, bonded and will be used to control and reduce pipe vibration at an LNG plant. Both the Hold Down and wedge support are made from A36 Carbon Steel and a fabric pad which is exceptionally suited for vibration impact and declination.

Want to learn more about hold down clamps? View a past pipe clamp webinar now!



access-our-webinar-archives



20,500 lb Riser Clamps for a Power Plant

August 22nd, 2003 No comments
20,500 lb Riser Clamps for a Power Plant

20,500 lb Riser Clamps for a Power Plant

PT&P recently fabricated 22 Fig. 190 Type 3 riser clamps for suspending the vertical runs of pipe at the central power plant in Puerto Rico.  The clamps are designed for 17″ and 24” pipes and have an overall length of 71″ and 87” respectively. Both designs have a bar stock size of 1.75″x10″ and load bolts of 2.75″ diameter. Utilizing gusset plates at the clamp’s bend radius allowed for the smallest, yet sufficient clamp stock size for the specified loads. The smaller clamp has an operating capacity of 14,000 lbs while the larger operates at 20,500 lbs. Chrome-Moy 387 Grade 22 bar stock was used with A193 Grade B7 bolting to accommodate high temperature operating conditions.

Do you see a need for riser clamps in your current or future project? Get pricing now!


request-a-quote


8,500 lb. Load Clamp Support Assembly

August 8th, 2003 No comments
8,500 lb. Load Clamp Support Assembly

8,500 lb. Load Clamp Support Assembly

8,500 lb. Load Clamp Support Assembly

Clamp and Variable Spring Assembly

PT&P recently designed and manufactured a support assembly with two PTP-2 Type C spring hangers and a special clamp support. The springs are designed for an 8,500 lb load and a maximum travel of 1″. The entire pipe hanger assembly, with a net weight of 860 lbs, was fabricated from Carbon Steel and A-387 GR. 22 Chrome. The springs were calibrated to determine the exact spring rate prior to adjusting to customer specifications.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar now!



access-our-webinar-archives



Straps for a Chemical Plant in Texas

November 22nd, 2002 No comments
Straps for a Chemical Plant in Texas

Straps for a Chemical Plant in Texas

Piping Technology & Products, Inc. recently designed and manufactured two strap assemblies for a chemical plant in Texas.

These 24′ x 8 straps are comprised of A516-70 plates, struts, pipe clamps, SCHXS and SCH160 pipe, and fabricated turnbuckles. This job was completed within two weeks to meet the customer’s quick turnaround requirements.

Do you require pipe straps in your piping system? Get pricing today!  

request-a-quote


Stanchions and Beams for a Power Center

October 18th, 2002 No comments
Stanchions and Beams for a Power Center

Stanchions and Beams for a Power Center

Piping Technology & Products, Inc. designed and manufactured carbon steel and alloy stanchions for a power center in Arizona.  PT&P also produced carbon steel beams for the project.

These stanchions are made to fit Extra Strong and Standard pipes, which are 3-12 in size. Figure 1 shows the stanchions and beams for this job before they were coated with a green primer and prepared for shipment.

Do you see a need for stanchions and beams in your power plant or refinery? Get pricing today!

request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy