Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Clamp — The Pipe Supports Blog

42” Hold Down with Wedge Support

October 3rd, 2003 No comments

 

42” Hold Down with Wedge Support

42” Hold Down with Wedge Support

PT&P designed and fabricated a Hold Down with wedge support for a 42” pipe. The entire assembly is PTFE, 25% glass filled, bonded and will be used to control and reduce pipe vibration at an LNG plant. Both the Hold Down and wedge support are made from A36 Carbon Steel and a fabric pad which is exceptionally suited for vibration impact and declination.

Want to learn more about hold down clamps? View a past pipe clamp webinar now!



access-our-webinar-archives



Straps for a Chemical Plant in Texas

November 22nd, 2002 No comments
Straps for a Chemical Plant in Texas

Straps for a Chemical Plant in Texas

Piping Technology & Products, Inc. recently designed and manufactured two strap assemblies for a chemical plant in Texas.

These 24′ x 8 straps are comprised of A516-70 plates, struts, pipe clamps, SCHXS and SCH160 pipe, and fabricated turnbuckles. This job was completed within two weeks to meet the customer’s quick turnaround requirements.

Do you require pipe straps in your piping system? Get pricing today!  

request-a-quote


40 Clamp Attachments for a Petrochemical Plant

May 10th, 2002 No comments
40 Clamp Attachments for a Petrochemical Plant

40 Clamp Attachments for a Petrochemical Plant

The clamp attachments shown are used for supporting vertical pipe sections to vessel clip anchors. These braces are designed for a maximum horizontal moment of 15,000 ft-lb at the vessel clip. All the clamps provided were made of carbon steel with a hot-dip-galvanized finish. The pipe hanger assembly lengths were fabricated per specifications provided by the client.

The clamp components were designed and fabricated for non-standard pipe diameters (i.e. 13-3/4″, 16-1/2″) so that they could be used on insulated or finned pipelines.

Are you in need of clamp attachments? Request a quote today and receive a response within 48 hours!

request-a-quote


24", Chrome-Moly, Three-Bolt Clamps with Stanchions

April 5th, 2002 No comments
24", Chrome-Moly, Three-Bolt Clamps with Stanchions

24", Chrome-Moly, Three-Bolt Clamps with Stanchions

Piping Technology & Products, Inc. designed and fabricated 24″, chrome-moly, three-bolt clamps with horizontal guide stanchions for a 765 MW natural gas-fired combined cycle facility in Mexico.

These clamps, in conjunction with variable springs, will allow for vertical and axial pipe movement while restricting lateral movements. They were made for 24″ OD pipe from 1-1/2 x 9″ stock material. Based upon design considerations, the clamp “E” dimension, from pipe centerline to outer load bolt, was 25″. The clamps were designed for operation at 1065°F and per customer-supplied information, the vertical design load was 1,848 lbs and the maximum lateral load was 19,207 lbs.

The clamp plates are made of A387 GR. 22 plate material, stanchion pieces of A335 GR.22 pipe and the side stop plates of carbon steel.

Want more information on three-bolt clamps? Learn more about them in our webinar archives!




access-our-webinar-archives



66" Diameter, Three-bolt Pipe Clamp

February 8th, 2002 No comments
66" Diameter, Three-bolt Pipe Clamp

66" Diameter, Three-bolt Pipe Clamp

66" Diameter, Three-bolt Pipe Clamp

66" Diameter, Three-bolt Pipe Clamp

Piping Technology & Products, Inc. custom designed and fabricated a 66-inch diameter, three-bolt pipe clamp for a chemical company located in Deer Park, Texas.

The clamp will be used in conjunction with a PT&P Spring Hanger and a length of rod in order to support the pipeline.  After formation, the clamp’s dimensions measured at 97.75 OAL and 69.5 at its widest point. By using a FEA program, the clamp was designed for an operating load of 24,000 pounds at 500° F. The materials used consisted of 1 ¾ x 10 x 128 ¼ thick A-36 Carbon steel, with three 2½ studs and nuts.

In need of some three-bolt pipe clamps? Request for pricing today!

request-a-quote


40" Diameter, Alloy Yoke Clamp

October 12th, 2001 No comments
40" Diameter, Alloy Yoke Clamp

40" Diameter, Alloy Yoke Clamp

PT&P specially designed and manufactured a heavy duty, 40-inch diameter, alloy yoke clamp (cut from a 6″ thick plate) for a Power Plant in Mississippi. The clamp was designed for a 70,000 lb load and is to support a 40″ diameter, high pressure main steam line. The u-bolt was made of a 3″ diameter bar. In order to prove the design of this clamp, Finite Element Analysis was used to simulate the loads and stresses that it may experience in the field. The model shows the stresses at every point by a color coding system.

Want to learn more about yoke clamps and other types of clamps? Visit our webinar archives today!


access-our-webinar-archives



Arrestor Type Hold Down

March 9th, 1994 No comments
Arrestor Type Hold Down

Arrestor Type Hold Down

The above photo shows an arrestor type hold down. This type of restraint is used when there is very low thermal movement. Its radius is lined with a belting material designed to absorb shock from movement. It is widely used on compressor lines or similar applications. The restraint type hold down’s clamp radius and base is lined with PT&P’s PTFE slide plate which allows for axial movement while restraining lateral movement and used on compressor lines where temperatures are high and thermal movement is great. This anchor type hold down is utilized on pipelines and require little or no insulation. It is fabricated from carbon steel and can be used in temperatures up to 750oF.

Would you like to learn more about hold down clamps and slide plates? Visit our website archives today!

access-our-webinar-archives

Heavy Duty Beam Clamp Assemblies

June 4th, 1993 No comments
Heavy Duty Beam Clamp Assemblies

Heavy Duty Beam Clamp Assemblies

Manufactured in Houston, Texas by Piping Technology & Products, heavy duty beam clamp assemblies are used for suspension of heavy loads from standard I-beam and wide flange beams with flange widths to 15” and flange thickness to 1.031”.

Do you need a heavy duty beam clamp assembly similar to this one? Get pricing today!

request-a-quote

86” Diameter Clamps

May 1st, 1992 No comments
86” Diameter Clamps

86” Diameter Clamps

Specially formed and gusseted 86” diameter clamps are being strapped to their pallets for their journey to Western Canada.

PT&P designed and built these specialty clamps of 3” x 16” bar stock for a major producer of oil and gas in Alberta for an application in their process sector.

Would you like to learn more about pipe clamps? Check out a recording of a live pipe clamps webinar. access-our-webinar-archives

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy