Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Clevises — The Pipe Supports Blog

Billet Style Clevises & Turnbuckles for Temperatures up to 1000ºF for a Power Plant

December 8th, 2009 No comments

 

Billet Style Clevis

Billet Style Clevis

The clevis and turnbuckle pictured are each fabricated from individual solid pieces of 304H stainless steel. The 304H material, which has a maximum carbon content of 0.06%, was required because these items are designed to be used in an environment with temperatures up to 1000ºF. The customer’s specifications mandated that no welding would be allowed on either the clevises or turnbuckles. Additionally, no forgings were readily available, so blocks of 304H stainless steel were utilized in this design.

Billet Style Turnbuckle

Billet Style Turnbuckle

Both the clevises and turnbuckles are made to accommodate rod diameter ranges between 1-1/4″ to 1-3/4″. These components have a maximum load capacity of 18,600 lb. The clevises measure 3″ thick x 5-1/4″ wide x 10-5/8″ tall. The turnbuckles measure 2″ thick x 4″ wide x 9-1/4″ tall. Prior to fabrication, each component was modeled using finite element analysis to determine that stress levels are within the acceptable range.

Do you require some pipe support hardware for your project? Get pricing today!

request-a-quote

Rods and Clevises for a Natural Gas Combined Cycle Facility

June 21st, 2002 No comments
Rods and Clevises for a Natural Gas Combined Cycle Facility

Rods and Clevises for a Natural Gas Combined Cycle Facility

Piping Technology & Products, Inc. designed and manufactured hundreds of hanger rods and clevises for a 1,250 MW natural gas combined cycle facility in Mississippi.

The rod and clevis components were made of various alloys (800H, F91, 316H, SA-387 Gr. 22) and ranged in sizes from 2″ to 4″ diameter. Taking into account the surrounding environment’s conditions, engineers designed the rods and clevises so that they can endure temperatures escalating to 1430º F. For the duration of a pull test conducted, the clevises and rods sustained loads up to 152,000 lbs. and there were no discrepancies.

Are rods and clevises on your checklist for an upcoming project? Request a quote today!

request-a-quote


1,728 Rods & Clevises

November 16th, 2001 No comments
1,728 Rods & Clevises

1,728 Rods & Clevises

Piping Technology & Products, Inc. custom designed and fabricated 1,728 rods and clevises for a heat recovery steam generation plant. The rods and clevises will be utilized to support various pipe loads throughout the piping system.

Learn more about rods and clevises by visiting our webinar archives!



access-our-webinar-archives



Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy