Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Constants — The Pipe Supports Blog

U-Type Constant Spring Supports Designed for a Power Plant

August 20th, 2017 Comments off

U-Type Constant Spring Supports Designed for a Power Plant

Type: Constant Spring Supports
Material: Carbon Steel | HDG | PTFE, 25% Glass Filled
Design: 8,200 lb. Load | 11-1/2″ Total Travel
Testing: Standard Load and Travel Test

PT&P designed and manufactured 48 constant spring supports for a power plant in Mexico. The constants pictured above are Fig. 200 U-type constant spring supports fabricated from A-36 carbon steel and include PTFE, 25% glass filled slide plates bonded to the load flange. The supports are 39″ H x 26″ W x 80″ L and are designed for operating loads up to 8,200 lb., with a total travel of 11-1/2″. These are horizontal constants designed to support piping from below in conjunction with a pipe saddle. All the constants went through standard load and travel testing per MSS Standards prior to shipment.

C-Type Constant Spring Supports for a Refinery in Texas

July 10th, 2017 Comments off

C-Type Constant Spring Supports for a Refinery in Texas

Type: Constant Spring Supports
Size: 25″ in Height x 17-38″ in Length x 11-5/8″ in Width
Material: A-36 Carbon Steel with HDG Finish
Design: 981 lb. to 1828 lb. load | 2-1/2″ to 3″ Vertical Movement Range
Testing: Standard Load and Travel Testing per MSS Standards

Piping Technology & Products, Inc. designed and manufactured C-type constant spring support assemblies for a refinery in Texas. The constants are 25″ in height, 17-3/8″ in length, and 11-5/8″ in width. Their load capacities range from 981 lb. to 1828 lb., with a vertical movement ranging from 2-1/2″ to 3″. All constants were fabricated from A-36 carbon steel with a hot-dipped galvanized finish, and underwent standard load and travel testing per MSS Standards prior to shipment.

Constant Spring Support Assemblies Designed for a Chemical Plant in New Jersey

January 23rd, 2017 Comments off

Constant Spring Support Assemblies Designed for a Chemical Plant in New Jersey

Type: Constant Spring Supports
Size: PTP 200 C-Type Double Suspension
Material: Hot-dipped Galvanized Carbon Steel | Epoxy Coated Springs
Load: 8,000 lb. – 19,000 lb. | Upward Movement: 6″ – 9″
Testing: Standard Load and Travel Test

PT&P designed twelve constant spring support assemblies for a chemical plant in New Jersey. The assemblies will be used as replacements in a recuperator up-leg and down-leg application in conjunction with custom cross-over supports previously fabricated by PT&P. Physical sizes of these constant assemblies range from 18-1/2″ x 22″ x 64″ to 18-1/2″ x 26″ x 83″. Operating loads range between 8,000 lb. – 19,000 lb. and each allows for upward movement between 6″ – 9″. The spring coils are coated with epoxy instead of the standard neoprene coating. Standard load and travel tests were completed prior to shipment.

U-Type Constants Designed with Slide Plates for a Polypropylene Plant in Texas

August 22nd, 2016 Comments off

147164a1

PT&P designed and fabricated U-Type constant spring support , with PTFE, 25% glass filled side plate for a Polypropylene Plant in Texas. The constant is fabricated from carbon steel, and hot-dipped galvanized for extra protection against corrosion. The vertical movement is 1.5″ total upward travel and is capable of supporting a 10,350 lb. load. The constant underwent standard load testing prior to shipment.

Constant Spring Supports Design and Application Webinar

August 11th, 2016 Comments off
This webinar is over, view the recording in the webinar archives

Constant Spring Support

This Webinar will focus on the different types of constant spring supports. Learn about the special features available, in addition to the design of a constant support. View how the different cam/coil configurations produce a unique response to an applied load. Discover the step by step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to adjust or replace a constant spring support, as well as shutdown and isolation procedures.

The featured presenter, Jerry Godina has over 15 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

Constant Spring Supports Designed for a Power Plant in New Mexico

March 7th, 2016 Comments off

Constant Spring Supports Designed for a Power Plant in New Mexico

PT&P fabricated constant support assemblies for a power plant in New Mexico. The constant assemblies will be used in conjunction with structural supports also provided by PT&P. Operating loads range between 7,000 lb. and 20,000 lb. and designed for movements from 10-1/2″ to 12″. All thread rods were coated with rust prevention compound and the constants were painted with Intergard® 475 HSS. The travel stops are wired to the constants frame and can be reused to lock the constant, preventing travel during plant maintenance or shutdowns. Standard load and travel tests were completed according to MSS standards prior to shipment.

Custom F-Type Constant Spring Supports for Oil Refinery

November 6th, 2015 Comments off

Custom Constant Spring Supports for Oil Refinery

PT&P designed 100-F type constant spring supports for an oil refinery in Alabama. These custom constant spring supports are 32” x 12” x 23.5” and designed to support an operating load of 650 lb. with 14” of total travel. The constants are fabricated from A36 carbon steel and the coil is from 5160H alloy material. Standard load and travel testing were completed to ensure the quality and performance of these constants.

Constant Spring Supports Designed for a Steam Methane Reformer

May 10th, 2015 Comments off

Constant Spring Supports Designed for a Steam Methane Reformer
PT&P manufactured Fig. PTP 100-E constant spring supports for a steam methane reformer plant project in Thailand. The constant springs are designed for a pipe operating temperature from 650°F to 1250°F and an operating load of 3,355 lb. with a movement of 13″ upward. The constants are fabricated from carbon steel and painted with an epoxy for high temperatures. Standard load and travel test were completed prior to shipment.

Custom Designed Upthrust Constant Spring Supports

March 20th, 2015 Comments off

Custom Designed Upthrust Constant Spring Supports

PT&P designed Fig. PTP 200-U upthrust constant spring supports modified to accommodate an increased installed height. PT&P fabricated these constant assemblies from A36 carbon steel. They were designed for temperatures up to 185°F, and a load of 15,737 lb. The constants are capable of a downward total travel of 2″ and are 61″ L x 25″ W x 39″ H. Standard load and travel tests were conducted prior to shipment.

U-Type Constant Spring Supports Designed to Support Ducts in an Acid Plant

March 23rd, 2014 Comments off

U-Type Constant Spring Supports Designed to Support Ducts in an Acid Plant

U-Type constant spring supports were designed to support ducts in an acid plant. The constants are fabricated from carbon steel, galvanized and painted for extra protection against corrosion. The U-type constants are designed to support piping from below. The base plate is 25-7/8″ wide and bolted directly to the top of the steel or floor. The assemblies measure 84″ in length and 22-1/2″ in height. They only have vertical movement subjected by 6-1/2″ total upwards travel and are capable of supporting a 13,489 lb. load. The constants underwent standard spring testing prior to shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy