Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Cryogenic Insulated Supports — The Pipe Supports Blog
Posts Tagged ‘Cryogenic Insulated Supports’

Register for the Pre-Insulated Pipe Supports Webinar (Cryogenic/High Temp.)

September 2nd, 2015 Comments off

This webinar is over, view the recording at: http://info.pipingtech.com/pre-insulated-support-webinars

Pre-Insulated Pipe Supports

This presentation will cover Pre-Insulated Pipe Supports, including pipe insulation products for both cryogenic and heat applications. Learn about the different types of insulation materials and get the inside scoop on our cold shoe design. Explore how Polyurethane foam is produced, from mixing polyols and isocyanates to inspecting the final product. Learn about anchor shoe testing, lateral load testing, compressive strength testing, and axial load testing.

The featured presenter, David Baker has over 12 years experience with pre-insulated pipe supports, on-site surveys, inspections, Installation and Maintenance. He is also the manager of PT&P’s Field Service division and our in-house consultant for pre-insulated pipe supports.

Insulated Pipe Supports Designed for Cryogenic Temperatures Down to -320°F in an LNG facility

May 31st, 2011 No comments

insulated pipe supports designed for cryogenic temperatures down to 320°F in an LNG facility

insulated pipe supports designed for cryogenic temperatures down to 320°F in an LNG facility

A total of 295 cryogenic pipe supports ranging from 4″ to 38″ NPS were designed for a LNG regasification facility in India. The shoe and bearing plates were fabricated from carbon steel, the jacket was fabricated from aluminized steel and includes a vapor barrier. 20 PCF high density polyurethane foam was used for the insulation.

Do you see a need for cryogenic supports in your piping system? Get pricing today!
request-a-quote


Sliding Cryogenic Insulated Supports for a 60" Diameter Vapor Line

October 25th, 2010 No comments
Sliding Cryogenic Insulated Supports for a 60" Diameter Vapor Line

Sliding Cryogenic Insulated Supports

These sliding cryoshoes are fabricated from carbon steel with 2″ thick polyurethane insulation. The polyurethane is 20 lb. density, which has a compressive strength of 500 psi and a tensile strength of 600 psi. The cold shoes are designed for temperatures as low as -300°F and for loads up to 3,500 lb. They will be used to support a 60″ diameter low temperature vapor line in a Texas facility.

Want to learn more about cryogenic supports? Instantly view a past webinar now!

access-our-webinar-archives


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy