Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Engineered Spring Supports — The Pipe Supports Blog
Posts Tagged ‘Engineered Spring Supports’

Variable Spring Supports Custom Designed for a Furnace Application in an Ammonia Plant

July 28th, 2014 Comments off

Variable Spring Supports Custom Designed for a Furnace Application in an Ammonia Plant

PT&P custom designed variable spring supports for catalyst tubes in a furnace for an ammonia plant in Canada. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. This project required special coils that were within +/- 5% of the calculated spring rate. Over 245 springs underwent calibration test prior to shipment. PT&P has been supplying furnace springs for over 25 years and can customize them to meet your specifications.

F-type Variable Spring Supports Designed for a Petroleum Facility

May 16th, 2014 Comments off

F-type Variable Spring Supports For Petroleum Facility

PT&P designs thirty F-type variables spring supports for a petroleum facility in Canada. The springs are fabricated from carbon steel and with a hot-dipped galvanized finish. The assemblies are internally guided and have a 3,455 lb. operating load. A standard travel test was conducted on the variables prior to shipment.

Stainless Steel Constant Spring Supports for an Oil Refinery in the Virgin Islands

December 17th, 2012 Comments off

Stainless Steel Constant Spring Supports for an Oil Refinery in the Virgin Islands

PT&P custom designed  C-type constant spring supports for an oil refinery in the Virgin Islands. They are fabricated entirely from 304 stainless steel to support piping in a highly corrosive environment. The design loads are 7,000 lb., 9,500 lb., and 11,000 lb. with movements of 2-1/2″ and 3″. The constants measure 29″ L x 22″ W x 20″ H. Standard load and travel testing was conducted prior to shipment.

F-Type Variable Spring Supports for a Chemical Plant and Refinery in Singapore

December 20th, 2010 No comments
F-Type Variable Spring Supports

F-Type Variable Spring Supports

An assortment of standard variable spring supports were manufactured ranging in size from 8-5/8″ to 12-3/4″ dia. with installed heights ranging from 9-7/16″ to 18-1/8″. The F-Type pipe hanger assembly is used to support the pipe from below and are typically mounted to concrete pads via anchor bolts or welded to structural steel. The various springs shown are designed for operating conditions ranging from loads of 1750 lb. with .02″ travel to 21,280 lb. loads with .13″ travel. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.

Do you see a need for variable springs in your piping system? Let us price them for you!

request-a-quote

Variable Spring and Cro-Moly 3-bolt Clamp Assemblies for a Power Generation Facility

October 5th, 2010 No comments

Variable Spring and Cro-Moly 3-bolt Clamp Assemblies for a Power Generation Facility

The variable spring and clamp assemblies are fabricated using a combination of carbon steel for the housing and internal components, spring steel for the spring coils, and Cro-Moly (A-387 GR. 22) for the high temperature 3-bolt clamps. This pipe hanger assembly is an example of PT&P’s standard variable spring design wherein multiple coils are arranged in series to produce adequate load carrying capacity and coil deflection to compensate for the anticipated pipe movement. These particular assemblies are capable of an overall load range of 9,320 lb. to 15,970 lb. with a total travel range of 5″. All pipe hanger assemblies underwent standard load and travel testing, 100% deflection testing, and load cell calibration before shipping to a power generation facility.

Want to learn more about variable springs? Watch a recorded variables webinar!

access-our-webinar-archives

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy