Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
F-Type Variables — The Pipe Supports Blog
Posts Tagged ‘F-Type Variables’

F-Type Variable Springs for a Refinery in Oklahoma

June 26th, 2017 Comments off

F-Type Variable Spring Cans for a refinery in Oklahoma

Type: Variable Spring Supports
Size: 70 7/8″ tall and 17 3/4″ wide
Material: Carbon Steel and PTFE Slide Plates
Design: 30,980 lb. load/2,083 lb. spring rate
Testing: 35,000 lb hydrotest

PT&P manufactured variable spring supports for a refinery in Oklahoma. These F-Type PTP-6 spring cans are 70 7/8″ tall and 17 3/4″ wide. They are completely fabricated from carbon steel with PTFE slide plates welded on the load flange and internal guide. They are designed for an operating load of 30,980 lb. .with a spring rate of 2,083 lb./in. and 0.49″ of movement. These variables were hydrotested with a load of 35,000 lb. prior to shipment.

Variable Spring Support with Bronzphite® Slide Plates Designed for a Facility in Canada

May 23rd, 2016 Comments off

Variable Spring Support with Bronzphite® Slide Plates Designed for a Facility in Canada

PT&P manufactured these F-type variable spring supports for a facility in Canada. The springs are fabricated from A36 carbon steel with a hot-dipped galvanized finish. The variables installed heights range from 11″ to 15″ and are designed for operating conditions up to 4,000 lb. Bronzphite® is best suited for high loads, low velocity applications and where the use of oil or grease is undesirable or unfeasible. The bronze plate acts as the bearing surface, withstanding heavy loads, while the graphite inserts provide a solid, oil-free lubricant. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.

F-Type Variable Spring Supports Designed for an LNG Facility

February 8th, 2015 Comments off

F-Type Variable Spring Supports Designed for an LNG Facility

PT&P manufactured F-type variable spring supports for an LNG facility in Colorado. The variables installed heights range from 10-5/8″ to 21-1/16″. The F-Type pipe hanger assembly is used to support the pipe from below and are typically mounted to concrete pads via anchor bolts or welded to structural steel. The various springs shown are designed for operating conditions ranging from loads of 633 lb. to 6510 lb. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy