Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
G-Type Variable Springs — The Pipe Supports Blog
Posts Tagged ‘G-Type Variable Springs’

G-Type Variable Spring Assemblies Designed for an Oil & Gas Refinery in Texas

August 6th, 2016 Comments off

G-Type Variable Spring Assemblies Designed for an Oil & Gas Refinery in Texas

PT&P designed these G-Type variable spring support assemblies, along with a 24” pipe shoe and hanger for an oil and gas refinery in Texas. Each item is designed with a center to center of 36” and an elevation difference up to 72”. The spring supports consists of a G-type variable spring, all threaded rod, clevis, lifting lugs, welding lugs and clevis pins. They are designed with an operating load range from 1,700 lb. to 10,500 lb. and a movement range of .02” to .19” up or down. Standard load and travel testing was completed prior to shipment.

G-Type Variable Springs Support Designed for an LNG Facility

December 23rd, 2015 Comments off

G-Type Variable Spring Supports Designed for an LNG Facility

PT&P designed these G-Type variable spring support assemblies for an LNG facility in Saudi Arabia. The variables are comprised of two standard spring housing joined together with an intermediate bridge assembly. They are designed an upwards travel range of 0.078″ to 0.118″. The variables were fabricated from carbon steel with a hot-dipped galvanized finish. Standard load and travel testing was completed prior to shipment.

G-Type Variable Spring Supports Designed for a Coker Replacement Project

April 12th, 2015 Comments off

G-Type Variable Spring Supports Designed for a Coker Replacement Project

PT&P fabricated PTP-6 G-type variable spring supports for a coker replacement project in Kansas. The variables are comprised of two standard spring housing joined together with an intermediate bridge assembly. The bridge assembly is customized to match existing site conditions which allows for use in applications with limited space or interferences. They are 50″ in length, designed for an operating load of 15,000 lb. and fabricated from carbon steel with a hot-dipped galvanized finish. All variable assemblies underwent standard load and spring testing prior to shipment.

G-Type Variable Spring Supports Designed for a Paper Manufacturing Plant

April 5th, 2014 Comments off

G-Type Variable Spring Supports Designed for a Paper Manufacturing Plant

PT&P designed G-Type variable spring supports for a paper manufacturing plant in Minnesota. The variables are comprised of two standard spring housing coil subassemblies joined together with an intermediate bridge assembly. The bridge assembly is customized to match existing site conditions which allows for use in applications with limited space or interferences. The variables are fabricated from carbon steel with a hot-dipped galvanized finish. The assemblies were designed for a total operating load of 1,348 lb. with an upward design travel of 0.8013″. Each assembly underwent a standard load test prior to shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy