Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Hot Shoes — The Pipe Supports Blog

PT&P’s Sizzling Summer: Supports, Services & Safety

August 8th, 2017 Comments off

High Temperature Insulated Supports for an HP Steam Header

May 30th, 2017 Comments off

High Temperature Insulated Supports for an HP Steam Header

Type: Pre-Insulated Pipe Supports for High Temperatures “Hot Shoes”
Size: 2″ – 12″ dia. | 12″, 15″, 18″ Long | 4″ and 6″ BOP
Material: Carbon Steel with Thin Blanket Insulation
Testing: Standard Q.C. Inspection | ANSYS Simulation

Piping Technology & Products custom designed and fabricated pre-insulated pipe supports for high temperature application in an HP Steam Header located in Texas. These hot shoes range in size from 2″ to 12″ in diameter and are 12″, 15″ and 18″ long, with BOP of 4″ and 6″. The supports include a thin blanket insulation. The trunnion assembly is resting on a high compressive strength insulation material. These supports are designed for temperatures up to 844°F with an operating load of 17,965 lb. at 732 psig. A total of 95 supports were manufactured for this project, including pipe hangers, pipe shoes with insulation and trunnion supports, as well as pipe shoe clamps without insulation. All supports were inspected by Q.C. and the insulated supports underwent a simulation on ANSYS.

16″ Dia. Insulated Pipe Supports Designed for a High Temperature Pipeline in Tennesse

July 27th, 2015 Comments off

PT&P/Pipe Shields, Inc. Manufactured Insulated Pipe Supports for a Pipeline in Tennessee

PT&P/Pipe Shields, Inc. manufactured insulated pipe supports designed for 12″-16″ diameter pipes in a high temperature application in Tennessee. They are fabricated from hot-dipped galvanized carbon steel and have 5-1/2” thick FireTemp® insulation. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

June 21st, 2015 Comments off

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for cryogenic and high temperature pipe systems, with a 8″ to 22″ baseplate width and 10″ to 28″ saddle length. They were designed for pipe diameters of 6″-24″ and are comprised of polyurethane foam for cryogenic and FTM insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

54″ Dia. Pre-Insulated Pipe Shoes Custom Designed for a Pipeline in Texas

February 21st, 2015 Comments off

54

Pipe Shields/PT&P designed and manufactured pre-insulated pipe shoes for a 54″ diameter pipeline in a chemical processing plant in Texas. The hot shoes are custom designed with a wide base to accommodate lateral movement and axial movements of +/- 4 1/2″. We designed the hot shoes to include additional bolting along with bolting torque recommendations order to help prevent slippage of the pipe inside the pipe shoe. We designed the supports to accommodate vertical loads up to 22,200 lb. and temperatures up to 1800°F. The outer part of the shoe was manufactured of hot-dipped galvanized carbon steel while the inner insulation material is 4″ thick high density calcium silicate insulation.

Pre-Insulated Pipe Supports Designed for High Temperatures in a Power Plant

June 22nd, 2014 Comments off

Pre-Insulated Pipe Supports Designed for High Temperatures in a Power Plant

Piping Technology designed hot shoes with sliding bases for a power plant in Mississippi. The assemblies will be installed on 28″ diameter pipe and include 1-1/2″ thick calcium silicate insulation. Manufacturing fabricated these supports from galvanized carbon steel with a polyethylene base. They are capable of an operating load of 7,200 lb., temperatures up to 1,200 degrees F and an axial movement of +/- 4-1/2″. The shipment was met three days prior to the critical field need date.

215 Heavy Duty Pre-Insulated Pipe Supports Designed for a High Temperature Application

November 9th, 2013 Comments off

215 Heavy Duty Pre-Insulated Pipe Supports Designed for a High Temperature Application

Pipe Shields Inc., a division of PT&P, manufactured 215 heavy duty pre-insulated supports for a high temperature application in Oregon. They are 15″ L x 20″ W x 31″ H and are designed to accommodate 14″ – 20″ diameter pipes. The hot shoes have a calcium silicate insulation thickness of 2.5″- 3″. The base, clamps, nuts, jackets and bolts are all fabricated from hot dipped galvanized carbon steel and coated with red oxide paint. Standard Q.C. and dimensional tests were performed prior shipment.

42″ Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

July 5th, 2013 Comments off

42" Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

PT&P designed and fabricated heavy duty insulated pipe support anchors for a high temperature application. The base, clamps, nuts, jackets and bolts are all fabricated from hot-dipped galvanized carbon steel. The hot shoes have 3″ thick high density calcium silicate insulation, and are designed for 12″-42″ diameter pipes. The dimensions are 47″ L X 51″ W X 16″ H. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

274 Custom Hot Pipe Shoes Rush Delivered in Three Weeks

August 27th, 2012 Comments off

3 Week Turnaround on 274 Custom Designed Hot Shoes

We provided a quantity of 274 custom designed hot shoes on an expedited basis to a factory in Arizona. While the normal delivery time on a typical order might be 6-8 weeks, Piping Technology provided these pipe shoes on a 3 week delivery time. The high temperature pipe supports include clamping material fabricated from carbon steel with a red oxide finish, a polyethylene slide base with stainless steel slide plates, high density calcium silicate insulation and an overlapping galvanized sheet metal jacket. The pipe shoes are designed to accommodate 4″-8″ pipes and have an insulation thickness of 2″-3″ and the base measures 11″ to 14″ in width, and 6″ to 15″ in length. The hot shoes are designed for temperatures ranging from 40° F to 600° F. The insulation for these supports is a combination of high density calcium silicate with high strength inserts.

Custom High Temperature Pipe Supports for a Granular Activated Carbon Manufacturing Plant

January 30th, 2012 Comments off

Custom High Temperature Pipe Supports for a Granular Activated Carbon Manufacturing Plant
These high temperature pipe supports have a 25″ outside diameter, and were custom designed for a granular activated carbon manufacturing plant in Hawaii. They are fabricated from A-36 carbon steel with 10″ thick high density calcium silicate insulation. The hot shoes were designed for a 4″ diameter pipe-line, temperatures up to 1,800°F and an operating load of 1,000 lb. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Do you require hot shoes on an upcoming project? Get pricing today!

request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy