Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Insulated Pipe Supports — The Pipe Supports Blog
Posts Tagged ‘Insulated Pipe Supports’

Cryogenic Pipe Supports Designed for a Facility in Massachusetts

September 11th, 2017 Comments off

Cryogenic Pipe Supports Designed for a Facility in Massachusetts

Type: Cryogenic Pipe Supports
Material: Carbon Steel | Polyurethane
Design: -320°F | 36″ – 48″ Dia. | 52″ W x 57″ H x 67″ L

PT&P received an order to custom design 16 cryogenic pipe supports for a contractor in Massachusetts. They needed a pipe forming a T-section lined with insulation and trimmed to accommodate the pipe perpendicular to the shoe length. The overall dimensions of the order are pipe sizes ranging from 36″ to 48″ in diameter, 52″ width and 57″ to 67″ height. Our insulation is designed to support the pipe and its contents. When insulated pipes are supported, the weight of the pipe, the contents, the operating temperature, and the amount of energy loss must be considered. In order to support the pipe and minimize energy loss from heat transfer, a pre-insulated pipe support is necessary. If the material in the pipe is high temperature such as high pressure steam or heating oil, then high temperature insulation is required, and these supports are called hot shoes. If the material is cold, such as liquefied natural gas, cooling water or ammonia, then low temperature insulation is needed, and these types of supports are called cold shoes.

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

June 10th, 2017 Comments off

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

Type: Pre-Insulated Pipe Supports for Cryogenic Temperatures
Size: 5.5″ of Insulation / Clamps are 12″ wide
Material: Polyurethane Foam and Carbon Steel with HDG Finish
Design: 18″ Pipe and Cryogenic Operating Temperatures
Testing: Standard Quality Control Tests

These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.

Cryogenic Insulated Pipe Supports Designed for a Petrochemical Complex in Louisiana

March 27th, 2017 Comments off

Cryogenic Pipe Supports Designed for a Petrochemical Complex in Louisiana

Type: Pre-Insulated Pipe Supports for Cryogenic Application
Size: 46″ – 52″ Diameter Range | 10 lb. & 20 lb. Density PUF Foam
Material: Hot-dipped Galvanized Carbon Steel | PUF | Polyester Film & Aluminum Foil
Testing: Dimensional and Visual Inspection

PT&P custom designed pre-insulated pipe supports for a cryogenic pipeline at a petrochemical complex in Louisiana. They range in size from 46″ – 52″ diameter and are designed for temperatures down to -20°F. The top portion of the support is 10 lb. density and the bottom is 20 lb. high density polyurethane foam (PUF) insulation. The shoe and bearing plates were fabricated from carbon steel with a hot-dipped galvanized finish. These cold shoes include a vapor barrier comprised of a three layer lamination of polyester film and aluminum foil. Standard quality control tests were performed prior to shipment.

127 Cryogenic Insulated Pipe Supports Designed for a Chemical Plant

July 25th, 2016 Comments off

127 Cryogenic Insulated Pipe Supports Designed for a Chemical Plant

PT&P custom designed 127 cryogenic insulated pipe supports for a chemical plant in Texas. They are designed for pipe sizes ranging from 1″ – 24″ diameter and operating loads up to 120,517 lb. The insulation is high density polyurethane foam (PUF) ranging from 1″ to 7″ in thickness. The shoe and bearing plates were fabricated from carbon steel with a hot-dipped galvanized finish. The jacket was fabricated from aluminized steel and includes a vapor barrier. Standard Q.C. and dimensional tests were performed prior to shipment.

16″ Dia. Insulated Pipe Supports Designed for a High Temperature Pipeline in Tennesse

July 27th, 2015 Comments off

PT&P/Pipe Shields, Inc. Manufactured Insulated Pipe Supports for a Pipeline in Tennessee

PT&P/Pipe Shields, Inc. manufactured insulated pipe supports designed for 12″-16″ diameter pipes in a high temperature application in Tennessee. They are fabricated from hot-dipped galvanized carbon steel and have 5-1/2” thick FireTemp® insulation. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

June 21st, 2015 Comments off

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for cryogenic and high temperature pipe systems, with a 8″ to 22″ baseplate width and 10″ to 28″ saddle length. They were designed for pipe diameters of 6″-24″ and are comprised of polyurethane foam for cryogenic and FTM insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

Insulated Pipe Supports Designed for 6″ Dia. Cold Temperature Piping

January 11th, 2014 Comments off

Insulated Pipe Supports Designed for 6

These insulated pipe supports are designed for 6″ diameter cold temperature piping for a gas refinery in Texas. They are fabricated with a carbon steel shell and 5″ thick polyurethane insulation. PT&P offers various types of insulated supports utilizing insulating materials designed for piping ranging in surface temperatures from -460°F to 1,200°F.

72″ Dia. Cryogenic Pipe Supports Designed for an LNG Facility

May 6th, 2013 Comments off

72" Dia. Cryogenic Pipe Supports Designed for an LNG Facility

Custom designed cryogenic pipe supports were fabricated for an LNG facility in Africa. The shoes range in diameter from 30″ to 72″, 45″ to 88″ in height, 42-1/2″ to 85-1/2″ in width, and 28″ to 33″ in length. The insulation is a high density polyurethane foam (PUF) ranging from 5″ to 6″ thick. The shoe and bearing plates were fabricated from carbon steel with a HDG finish. The jacket was fabricated from aluminized steel and includes a vapor barrier.

 

Insulated Pipe Supports for Temperatures as Low as -260°F for a 30″ Diameter Pipe in a LNG Receiving & Regasification Plant and Refinery

January 25th, 2011 No comments

Cryogenic Supports for a LNG Receiving & Regasification Plant and Refinery

These cryogenic supports (also known as cold shoes) are fabricated from 20 PCF polyurethane insulation, weigh 650 lb. each and are designed for 30″ diameter pipe. They are comprised of a carbon steel base plate and bearing plate, a vapor barrier and an aluminum jacket. The supports are designed for temperatures as low as -260°F, and measure 27″ length by 44″ height. A total of thirty-four supports were fabricated for natural gas applications, including storage and transport.

Do you see a need for cryogenic supports in your piping system? Get a quote today!

request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy