Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pipe Anchors — The Pipe Supports Blog
Posts Tagged ‘Pipe Anchors’

42″ Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

July 5th, 2013 Comments off

42" Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application

PT&P designed and fabricated heavy duty insulated pipe support anchors for a high temperature application. The base, clamps, nuts, jackets and bolts are all fabricated from hot-dipped galvanized carbon steel. The hot shoes have 3″ thick high density calcium silicate insulation, and are designed for 12″-42″ diameter pipes. The dimensions are 47″ L X 51″ W X 16″ H. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Cold Insulated Pipe Anchors with Axial Stops

August 15th, 2011 No comments

Cold insulated pipe anchors with axial stops

Cryogenic pipe supports, ranging in diameter from 6″ to 38″, were designed to support and insulate piping in an LNG receiving and regassification plant. The “cold shoe anchors” were designed for temperatures down to -260°F and a load range of 26,000 lb. to 210,000 lb. A combination of high density polyurethane foam (PUF) and Permali® was used for the insulation. The center stops that are welded to the process pipe were built from 304 stainless steel, and carbon steel was used for the remainder of the shoe.

Cold insulated pipe anchors with axial stops

Do you have a need for cold shoes in your piping system? Get pricing today!

request-a-quote

Custom Carbon Steel Anchors and Shoes

July 25th, 2003 No comments
Custom Carbon Steel Anchors and Shoes

Custom Carbon Steel Anchors and Shoes

Piping Technology and Products, Inc. fabricated 4702 carbon steel shoes for various pipe sizes ranging from 2” to 10”. As per customer request, the shoes are designed to accommodate 30 PSI compressive strength. A three-coat paint system was applied for corrosion protection. All supports were liquid dye-penetrant tested at 5% of welds.

Custom Carbon Steel Anchors and Shoes

Anchors & Shoes on Shipping Floor

Do you need custom pipe anchors for your current or future project? Let us price them for you today!
request-a-quote


60" Galvanized Frictional Anchor

February 12th, 1993 No comments
60" Galvanized Frictional Anchor

60" Galvanized Frictional Anchor

60" Galvanized Frictional Anchors

Neoprene Lined Pipe Shoes Lined with Gussets

The picture on top shows an anchor fabricated for shipment to an overseas pipeline project.  It is a 60″ galvanized frictional anchor of bolted design with section reinforcing rings.  The pictures below show  two 60” painted pipe shoes which are neoprene lined with gussets and PTFE slide plates and three 48” pipe shoes of similar design.

Want to learn about other past custom projects we’ve done? Check out an archived webinar!

access-our-webinar-archives

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy