The 114″ diameter, 3-piece pipe clamp is fabricated from A36 carbon steel and the pins are stainless steel. The sway strut is also fabricated from carbon steel and measures 24′-8″ long. This assembly can support loads up to 27,200 lb. and will be used in an oil refinery in Louisianna.

Do you require clamps or sway struts for an upcoming project? We’d be happy to serve your needs!

Custom Constant Spring Hangers and Pipe Clamps

The constant spring hangers are manufactured from A36 carbon steel and have custom 4-bolt pipe clamps due to heavy loads. The dimensions are 40″ length x 18″ width x 85″ height and are designed for a 1,784 lb. load with 10″ of travel. The constants will be used to support radiant inlet manifolds and have a unique paint applied due to the highly corrosive condition. The entire pipe hanger assembly went through load and travel testing prior to shipping.

Want to learn more about constant springs? Instantly view a past constant webinar!

68,000 lb. Load Custom Clamp

Custom Clamp

This custom pipe clamp will be used in conjunction with a hydraulic snubber to restrain pipe movement during extremely high disturbances. It is designed to support the pipe where two heavy duty flanges join. The yoke, lugs, and strap sections of the clamp are carbon steel, and the clamp bolts and load bolt/pin are stainless steel.

The outer diameter of the clamp section is 16″, and the inner diameter is 10″. The upper lugs are fabricated from 3/4″ thick plate with a 2-1/4″ diameter load bolt. The maximum load for this custom clamp is 68,000 lb.

Do you require custom pipe clamps in your piping system? Get pricing today!

10" Beam Clamp Assemblies for an Electric Plant in West Virginia

Beam Clamp

These beam clamp assemblies are fabricated from carbon steel with a hot-dipped galvanized finish. The clamp is designed to support a pipe that is 10″ in diameter and is capable of loads up to 3,600 lb. The rod measures 7/8″ in diameter.

The function of the beam clamp assembly is to support the pipe and allow it to swing. The clamp requires no welding which allows for a quick and easy installation.

Do you require beam clamp assemblies in your project? Get pricing today!

97" Diameter, 3-Piece Pipe Clamps for a Refinery in Ponca City

Piping Technology & Products, Inc. fabricated 3-piece pipe clamps used to support 97″ diameter stainless steel duct work. This duct work is being added to a refinery for an expansion project in Ponca City, Oklahoma. Each section of the clamp assembly is formed from a continuous plate and gussets are added at each of the bolt locations for increased strength and rigidity. Due to the ducts having a relatively thin wall, these clamps are designed wider than necessary in an effort to reduce localized stresses on the duct work. The lower section of each clamp is formed to create a 150° cradle. This acts as a cradle by supporting the duct without inducing extra pressure, which might cause the duct wall to buckle or bend.

The upper sections are formed from 1/2″ thick by 12″ wide bar stock, whereas the lower sections are formed from 1/2″ thick by 18″ wide. All three sections are rolled to an inner radius of 48 1/2″ and the welded gusset plates are all 1/2″ thick. The upper sections are formed at 105° each, and the upper load bolt is 2″ in diameter while the six clamping bolts are 1 1/2″ in diameter.

The maximum load to be carried by these pipe clamps is 16,888 lb. Each pipe clamp will be used in conjunction with a variable spring support to accommodate movements as high as 2 1/4″.

Do you require 3-piece pipe clamps for your plant or refinery? Get pricing now!

24" Pipe Shoe with Clamps

This particular 24″ pipe shoe was specially designed and fabricated during a planned plant outage. Instead of the normal delivery time of 3-4 weeks, Piping Technology & Products, Inc. finished this project in just one week. This pipe shoe with clamps was designed for 12,900 lb. vertical and 3,000 lb. lateral load. This 1″ thick carbon steel pipe shoe was designed to handle 650°F and has a PTFE, 25% glass filled, slide plate installed to allow for axial movement.

Do you require pipe shoes with clamps like those described above? Get pricing today!

Three-Bolt Clamps for a Power Plant

These three-bolt clamps were designed to support operating loads from 19,000 lbs. to 25,000 lbs. These clamps were custom designed for 650F and pipe sizes from 6 to 22. They are constructed of carbon steel with weight ranging from 28 lbs. to 322 lbs.

Want to learn more about three-bolt clamps? View a past pipe clamp webinar today!

25,000 lb. Load Hydraulic Shock Suppressor and Clamp Assemblies

Piping Technology & Products, Inc., recently designed and manufactured fourteen PTP Fig. 2100 Hydraulic Shock Suppressor and pipe hanger assemblies for a Steel Company in North Dakota. The assembly consists of a 12 diameter alloy clamp and a PTP Fig. 2100 Hydraulic Snubber with cylinder size of 3 1/4 diameter and 5 stroke load. They are designed to accommodate loads of 25,000 lb. and high temperatures up to 1,100 F. To ensure the products quality, dimension and movement tests were conducted prior to shipment.

PT&P also designed and manufactured Variables Spring Hangers and various Pipe Supports Assembly Components in a range of different specifications and materials for this project.

Do you see a need for hydraulic snubbers in your piping system? Get pricing now!

6600 lb. load PTP-4 Type C Variable Springs with Riser Clamps

PT&P recently designed and manufactured six, PTP-4-160 type C variable springs with riser clamps for an oil refinery in Texas.  These variable springs are constructed from carbon steel and designed to support loads of 6600 lb. with a total travel of 2″. The clamps are fabricated from A 387 Gr. 22 alloy steel to fit 18″ pipes. Dimensional and fit-up tests were performed on the variable springs and riser clamps prior to shipping.

Do you see a need for variable springs in your current or upcoming project? Get pricing!

Thirty PT&P Fig. 70A Clamps for a Power Plant

Piping Technology and Products, Inc. recently designed and fabricated thirty PT&P Fig. 70A clamps to fit 14″ to 18″ pipes at a power plant in Florida. These clamps are designed for suspension of hot pipe lines where there is a high temperature and great thermal movement. The clamps are fabricated from SA 387 Gr. 22 alloy steel for temperatures of 1065F and loads of 8,000 lb. to 25,000 lb. These 160 to 395 lb. clamps have dimensions checked and a fit up test preformed prior to shipping.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!