Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pre-Insulated Pipe Supports — The Pipe Supports Blog

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

June 10th, 2017 Comments off

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

Type: Pre-Insulated Pipe Supports for Cryogenic Temperatures
Size: 5.5″ of Insulation / Clamps are 12″ wide
Material: Polyurethane Foam and Carbon Steel with HDG Finish
Design: 18″ Pipe and Cryogenic Operating Temperatures
Testing: Standard Quality Control Tests

These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.

Cryogenic Insulated Pipe Supports Designed for a Petrochemical Complex in Louisiana

March 27th, 2017 Comments off

Cryogenic Pipe Supports Designed for a Petrochemical Complex in Louisiana

Type: Pre-Insulated Pipe Supports for Cryogenic Application
Size: 46″ – 52″ Diameter Range | 10 lb. & 20 lb. Density PUF Foam
Material: Hot-dipped Galvanized Carbon Steel | PUF | Polyester Film & Aluminum Foil
Testing: Dimensional and Visual Inspection

PT&P custom designed pre-insulated pipe supports for a cryogenic pipeline at a petrochemical complex in Louisiana. They range in size from 46″ – 52″ diameter and are designed for temperatures down to -20°F. The top portion of the support is 10 lb. density and the bottom is 20 lb. high density polyurethane foam (PUF) insulation. The shoe and bearing plates were fabricated from carbon steel with a hot-dipped galvanized finish. These cold shoes include a vapor barrier comprised of a three layer lamination of polyester film and aluminum foil. Standard quality control tests were performed prior to shipment.

Pipe Shields for Beginners: Insulated Pipe Supports… for Commercial Applications

July 14th, 2016 Comments off

This webinar is over, view the recording in the archives

Insulated Pipe SupportThis webinar will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides and anchors that it developed and patented over it’s 40 year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems and low pressure steam lines), installation and maintenance procedures and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This webinar will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!

Piping Technology & Products New Foam Machine

June 6th, 2016 Comments off

48″ Dia. Cryogenic Pipe Supports Designed for a Light Hydrocarbon Production Facility in Texas

September 8th, 2015 Comments off

48” Dia. Cryogenic Pipe Supports Designed for a Light Hydrocarbon Production Facility

PT&P custom designed pre-insulated pipe supports with polyurethane insulation for cryogenic temperatures in a light hydrocarbon production facility in Texas. A total of 59 cold shoes were fabricated from A36 carbon steel with a hot-dipped galvanized finish. The cold shoe assemblies range in diameter from 24″-48″ and were designed to support loads ranging from 17,000 to 31,000 lb. Standard Q.C. and dimensional tests were performed prior to shipment.

Register for the Pre-Insulated Pipe Supports Webinar (Cryogenic/High Temp.)

September 2nd, 2015 Comments off

This webinar is over, view the recording at: http://info.pipingtech.com/pre-insulated-support-webinars

Pre-Insulated Pipe Supports

This presentation will cover Pre-Insulated Pipe Supports, including pipe insulation products for both cryogenic and heat applications. Learn about the different types of insulation materials and get the inside scoop on our cold shoe design. Explore how Polyurethane foam is produced, from mixing polyols and isocyanates to inspecting the final product. Learn about anchor shoe testing, lateral load testing, compressive strength testing, and axial load testing.

The featured presenter, David Baker has over 12 years experience with pre-insulated pipe supports, on-site surveys, inspections, Installation and Maintenance. He is also the manager of PT&P’s Field Service division and our in-house consultant for pre-insulated pipe supports.

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

June 21st, 2015 Comments off

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for cryogenic and high temperature pipe systems, with a 8″ to 22″ baseplate width and 10″ to 28″ saddle length. They were designed for pipe diameters of 6″-24″ and are comprised of polyurethane foam for cryogenic and FTM insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

54″ Dia. Pre-Insulated Pipe Shoes Custom Designed for a Pipeline in Texas

February 21st, 2015 Comments off

54

Pipe Shields/PT&P designed and manufactured pre-insulated pipe shoes for a 54″ diameter pipeline in a chemical processing plant in Texas. The hot shoes are custom designed with a wide base to accommodate lateral movement and axial movements of +/- 4 1/2″. We designed the hot shoes to include additional bolting along with bolting torque recommendations order to help prevent slippage of the pipe inside the pipe shoe. We designed the supports to accommodate vertical loads up to 22,200 lb. and temperatures up to 1800°F. The outer part of the shoe was manufactured of hot-dipped galvanized carbon steel while the inner insulation material is 4″ thick high density calcium silicate insulation.

Trunnions Designed with Insulation for an LNG Facility

August 23rd, 2014 Comments off

Trunnions Designed with Insulation for an LNG Facility

PT&P designed cryogenic trunnions with 2″ thick G-10 block insulation for an LNG facility in Australia. The trunnions are fabricated from 10″, 12″ and 24″ diameter pipe. The upper sections are fabricated from stainless steel pipe and plate while the lower sections are carbon steel. These insulated supports are designed for temperatures down to -300°F and operating loads of 4,990 lb.

30″ Dia. Cryogenic Pipe Supports with PUF and Permali®Insulation for an LNG Facility

August 9th, 2014 Comments off

30" Dia. Cryogenic Pipe Supports with PUF and Permali®Insulation for an LNG Facility

PT&P manufactured cryogenic pipe supports for a 30″ diameter pipeline in an LNG facility located in the UAE. These cold shoe anchors prevent axial and lateral movement at temperatures down to -300°F. The bearing plate is fabricated from carbon steel and the 5″ thick insulation is a combination of high density polyurethane foam (PUF) and Permali®.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy