Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pre-Insulated Supports — The Pipe Supports Blog

PT&P’s Sizzling Summer: Supports, Services & Safety

August 8th, 2017 Comments off

Take a Look into the Past: Insulated Pipe Supports

December 17th, 2010 No comments

Check out our most recent article that looks at the history of insulated pipe supports through the past 100 years.  Learn about the developments made in the 1950′s and 1960′s that introduced the use of “Foam Glass”, a lightweight material that is manufactured primarily from recycled glass and used in the design of insulated pipe supports. Later, polyurethane was developed to provide greater load carrying capabilities. Read the full article on the:

History of Insulated Supports

Permali® Insulated Pipe Anchors

Permali® Insulated Pipe Anchors

Want to learn more about pre-insulated supports? Instantly view a past pre-insulated support webinar now!
access-our-webinar-archives

Base Insulated Supports

October 31st, 2007 No comments
Base Insulated Supports

Base Insulated Supports

 

Base Insulated Supports

Base Insulated Supports

PT&P fabricated base insulated supports used to minimize thermal conductivity between the base and un-insulated lines. The support is designed with a carbon steel bottom and a stainless steel upper for cryogenic temperatures of -300°F. The insulation is made of 20 PCF polyurethane block. These supports are designed to handle lateral and axial pipe loads. They also include a wear pad for extra pipe reinforcement, which prevents local deformation of the pipe.

Do you require base insulated supports for project? Let us price them for you today!
request-a-quote


3 Cold Shoes for a LNG Plant in California

January 18th, 2006 No comments
3 Cold Shoes for a LNG Plant in California

3 Cold Shoes for a LNG Plant in California

3 Cold Shoes for a LNG Plant in California

Single Cold Shoe

These cold shoes are made of polyurethane for cryogenic pipe lines at a liquid nitrogen gas plant. They measure between 8” to 16” in diameter, 30” long with 4” of insulation. These cold shoes provide insulation in the support area where the regular pipe insulation (foam glass) is not sufficient to support the load.

Want to learn more about cold shoes? View a past cold shoe webinar today!


access-our-webinar-archives



Cold Shoe Pre-Insulated Anchors for an LNG Plant

October 12th, 2005 No comments
Cold Shoe Pre-Insulated Anchors for an LNG Plant

Cold Shoe Pre-Insulated Anchors for an LNG Plant

Cold Shoe Pre-Insulated Anchors for an LNG Plant

Side View of Pre-Insulated Anchor

These cold shoes are used for anchoring pipelines against movement caused by thermal expansion and by fluid flow in the pipe. The total weight of the 10 cold shoes is 8,336 lbs. They have 4 1/2″ of insulation and are made to fit a 12″ pipe. Their length varies between 18″ to 24″ for 6″ to 12″ of axial movement. The cold shoe is made of polyurethane insulation and A36 carbon steel. They are drop-in-place anchors that only need to be welded into the pipe run and fastened to the pipe rack. They were manufactured to specific design loads and movements for an LNG plant in Georgia.

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!


access-our-webinar-archives



Eight Cold Shoes for Plant in Egypt

May 13th, 2005 No comments
Eight Cold Shoes for Plant in Egypt

Eight Cold Shoes for Plant in Egypt

Eight Cold Shoes for Plant in Egypt

Unassembled Cold Shoes

Piping Technology & Products, Inc. custom designed eight cold shoes for a plant in Egypt. The pipe diameters of these shoes range from 10 to 18, and they weigh up to 2300 lbs. These cold shoes were designed to support a vertical cold line. The maximum load for this product is 28,000 lbs. These products were made from Micarta G10, A240 304L and A36.

Want to learn more about cold shoes? View a past pre-insulated webinar today!


access-our-webinar-archives



Various Sized Cold Shoes for a Chemical Plant

October 11th, 2002 No comments
Various Sized Cold Shoes for a Chemical Plant

Various Sized Cold Shoes for a Chemical Plant

Piping Technology & Products, Inc. designed and manufactured 250 variable sized cold shoes for a chemical plant in Texas.

These cold shoes are designed for cryogenic (low temperature) pipelines where direct contact with the pipe cannot be made.  These shoes come with two pieces, top and bottom, and are made of polyurethane foam.  They are then wrapped in vapor barriers, covered with a protective shield and placed in a pipe saddle.

Want to learn more about cold shoes? View a pre-insulated pipe support webinar today!


access-our-webinar-archives



Cryogenic Pipe Anchors For A Gas Refinery

October 2nd, 2001 No comments
Cryogenic Pipe Anchors For A Gas Refinery

Cryogenic Pipe Anchors For A Gas Refinery

Cryogenic Pipe Anchors For A Gas Refinery

Inside of the Pipe Anchor

Piping Technology & Products, Inc. manufactured cryogenic pipe anchors for gas refinery in Savannah, Georgia. The pipe anchors were fabricated with stainless steel and insulated with polyurethane foam. In order to prevent cold pumping, better known as temperature driven moisture penetration, polyurethane foam was poured around a stainless steel reinforcing pad. The ten cryogenic pipe anchors were fabricated to support 4-inch, 8-inch and 12-inch pipes. PT&P’s pre-insulated pipe supports department is devoted to the production of pipe insulation productions for both hot and cold applications.

Want more information on cryogenic pipe anchors? Visit our webinar archives today!



access-our-webinar-archives



PT&P Pre-Insulated Pipe Supports Catalog

September 19th, 1998 No comments

The PT&P catalog for cold shoes, hot shoes and other pre-insulated pipe supports is near completion. Draft copies of the catalog were distributed to certain customers for review. PT&P is now using the feedback received as a basis for revising and improving our first draft. Finished copies of the PT&P Pre-Insulated Pipe Supports Catalog will be available in late 1998.

Pre-Insulated Catalog

In need of some pre-insulated pipe supports? Request a quote today!


request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy