Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
PTFE 25% Glass Filled — The Pipe Supports Blog

HD-2 and HD-3 Hold-down Pipe Clamps with PTFE Slide Plates

July 30th, 2012 Comments off

HD-2 and HD-3 Hold-down Pipe Clamps

Designed for 20″ to 30″ pipe sizes, these HD-2 and HD-3 hold-down pipe clamps were shipped to a gas pump station in South Dakota. The hold downs were fabricated from carbon steel with PTFE, 25% glass filled liners on the saddle portion and base of the pipe clamp. We fabricated a total of 22 hold down pipe clamps and shipped this rush job within one week.

113 F-Type Variable Spring Cans with PTFE Slide Plates

July 16th, 2012 Comments off

113 F-Type Variable Spring Cans with PTFE Slide PlatesThese F-Type variable spring cans were designed with PTFE, 25% glass filled slide plates for a local oil refinery. Slide plates are used to reduce the friction between the load flange of the spring and the pipe support. This allows for easier adjustment of the spring’s installed height. These variables include external travel stops. The external travel stops are sometimes referred to as universal travel stops and can be utilized to adjust the installed load (also called the cold load) to other installed loads within the working range of the spring. 113 variable springs were supplied for this job. The variables have an installed load ranging from 95 lb. to 11,000 lb. and an operating load ranging from 90 lb. to 10,703 lb. They are part of a plant expansion and will be used to support horizontal piping in an oil refinery.

 

113 F-Type Variable Spring Cans with PTFE Slide Plates

PTFE, 25% Glass Filled Slide Plates Bonded to Stainless Steel Backing Plates

October 17th, 2011 No comments

PTFE, 25% glass filled slide plates bonded to stainless steel backing plates

The slide plates are comprised of 1/4″ thick PTFE, 25% glass filled slide plates bonded to 1/8″ A240 grade 316 L stainless steel backing plates. Stainless steel was used for better resistance to corrosion and longevity. The assemblies measure 83″ long by 20″ wide and will be installed underneath a bridge. A total of 16 slide plates were fabricated and designed for a pressure of 500 psi at ambient temperature. PTFE, 25% glass filled material provides a low coefficient of friction, is easy to install, does not require surface treatments, or grouting, and is unaffected by weather conditions.

PTFE, 25% glass filled slide plates bonded to stainless steel backing plates

Would you like to learn more about slide plates? Check out a recording of our past slide plate webinar!
access-our-webinar-archives

Custom U-Type Constant Spring Supports with Slide Plates

June 15th, 2010 No comments
Custom U-Type Constant Spring Supports with Slide Plates

Custom U-Type Constant Spring Supports with Slide Plates

PT&P fabricated 12 constant spring supports of various sizes with PTFE, 25% glass filled slide plates. The smallest constant is 38.25″ length x 13″ width x 28″ height, and the largest is 52″ length x 19″ width x 28″ height. The designed loads vary from 13,264 lb. to 15,962 lb. and the total travel range is 2″ to 3″.

Do you require constants or slide plates in your piping system? Get a quote today!

request-a-quote

43" Angled Pipe Shoes with PTFE, 25% Glass Filled, Slide Plates

September 5th, 2007 No comments
43" Angled Pipe Shoes with PTFE, 25% Glass Filled, Slide Plates

43" Angled Pipe Shoes with PTFE, 25% Glass Filled, Slide Plates

These pipe shoes are fabricated from A-516 GR70 carbon steel. PTFE, 25% glass filled, material is bonded to a carbon steel plate, then welded onto the shoe to allow movement of the pipe during expansion and contraction. The pipe shoes range in size from 18″ to 28″ in width and 28″ to 43″ in length.

Want to learn more about pipe shoes? Instantly view a webinar today!


access-our-webinar-archives



PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

March 14th, 2007 No comments

 

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

 

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

Piping Technology & Products, Inc. designed and manufactured PTFE, 25% glass filled, slide plates for cable trays located on a floating structure. The slide plates are used to reduce the friction between the cable trays and the structural steel it is resting on. These particular slide plates are bonded to stainless steel backing plates that are bolted to the structure.

Want to learn more about slide plates? Instantly view a slide plate webinar today!


access-our-webinar-archives



24" Pipe Shoe with Clamps

December 20th, 2006 No comments

 

24" Pipe Shoe with Clamps

24" Pipe Shoe with Clamps

This particular 24″ pipe shoe was specially designed and fabricated during a planned plant outage. Instead of the normal delivery time of 3-4 weeks, Piping Technology & Products, Inc. finished this project in just one week. This pipe shoe with clamps was designed for 12,900 lb. vertical and 3,000 lb. lateral load. This 1″ thick carbon steel pipe shoe was designed to handle 650°F and has a PTFE, 25% glass filled, slide plate installed to allow for axial movement.

Do you require pipe shoes with clamps like those described above? Get pricing today!
request-a-quote


Pre-Insulated Cryogenic Supports with PTFE, 25% Glass Filled, Slide Plates

February 22nd, 2006 No comments
Pre-Insulated Cryogenic Supports with PTFE, 25% Glass Filled, Slide Plates

Pre-Insulated Cryogenic Supports with PTFE, 25% Glass Filled, Slide Plates

 

Pre-Insulated Cryogenic Supports with PTFE, 25% Glass Filled, Slide Plates

Measuring Overall Length of the Support

Fifty Pre-Insulated Cryogenic Supports with PTFE, 25% Glass Filled, Slide Plates were manufactured for a 36” stainless steel piping system. The steel portion of the Cryogenic Supports is fabricated from ASTMA 240 Grade 304L stainless steel. The insulation used for the Slide Plate is Micarta, capable of supporting temperatures as low as -300°F. Each Pre-Insulated Cryogenic Support is 72” in length and weighs 2,000 lbs. It is designed to support the pipeline and accommodate 45” of axial travel at each support. They are used as Cryogenic Pipe Supports for a piping system that crosses a 1,000 foot suspension bridge.

Want to learn more about pre-insulated pipe supports? View a past webinar today!


access-our-webinar-archives



Spring Supports with PTFE, 25% Glass Filled, Slide Plates

March 11th, 2005 No comments
Spring Supports with PTFE, 25% Glass Filled, Slide Plates

Spring Supports with PTFE, 25% Glass Filled, Slide Plates

Piping Technology & Products, Inc. recently custom designed and manufactured 32 spring supports with PTFE, 25% glass filled, slide plates for a plant in China. The total weight of the spring supports supplied is 13,143 lbs. and they have a travel range of ¾”. These products support the vessel and the PTFE, 25% glass filled, slide plates allow height adjustment as well as mobility. These spring supports are designed for operating loads of 42,266 lbs. and were constructed of carbon steel.

Do you require spring supports or slide plates in your piping system? Get pricing now!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy