22″ Dia. Riser Clamps

All four riser clamps are manufactured from A-36 carbon steel plates and are coated with red oxide primer for rust prevention. They are 22″ in diameter with each plate measuring 2″ thick by 12″ wide by 65″ long. Each riser clamp is capable of supporting loads of up to 38,000 lb. and will be used in a power plant to support “downcomer” lines.

Do you see a need for riser clamps in your current or upcoming project? Let us price them now!

Riser Clamps for a Power Plant in Rhode Island

Riser Clamp

Piping Technology & Products designed and fabricated 80,000 lb. capacity, Type-3 riser clamps for a power plant in Rhode Island. These riser clamps are designed for a 16″ pipe with 2″ flanges for added support.

Do you see a need for riser clamps in your piping system? Let us price them for you!

930 Rod Hangers & Riser Clamps for a Construction Company

Close-up View

These rod hangers and riser clamps are made of carbon steel. They are capable of supporting 6 to 16 diameter pipes and loads of up to 2,435 lbs. They are used to support and stabilize piping systems and withstand temperatures up to 650 F. The shipment weighed 21,200 lbs.

Do you see a need for rod hangers and/or riser clamps in your piping system? Get pricing now!

26,500 lbs. Load Three-Bolt and Riser Clamps

Three-bolt Pipe Clamp

These Three-bolt and Riser Clamps, constructed of A36 carbon steel, were custom designed to support up to 26,500 lbs. load.  With a weight of 210 lbs. each, they are capable to support both horizontal and vertical piping.  To ensure quality, they were inspected for dimensional criteria and visual settlement using a section of a 24” pipe.

Want to learn more about pipe clamps? View a past pipe clamp webinar today!

Riser Clamp Assemblies with Neoprene Lining

Piping Technology and Products, Inc. custom designed eight sets of riser clamp assemblies for an oil rig in the Gulf of Mexico. These riser clamp assemblies were fabricated from API 2H GR. 50 carbon steel. They were designed to support vertical pipe lines on an offshore platform. Each set equipped with a neoprene lining consists of two clamps and a clamp stand. Several coats of marine paint finish were applied to the assemblies to prevent corrosion due to high salt water content and open air exposure.

Do you require riser clamps in your piping system? Get pricing today!

20,500 lb Riser Clamps for a Power Plant

PT&P recently fabricated 22 Fig. 190 Type 3 riser clamps for suspending the vertical runs of pipe at the central power plant in Puerto Rico.  The clamps are designed for 17″ and 24” pipes and have an overall length of 71″ and 87” respectively. Both designs have a bar stock size of 1.75″x10″ and load bolts of 2.75″ diameter. Utilizing gusset plates at the clamp’s bend radius allowed for the smallest, yet sufficient clamp stock size for the specified loads. The smaller clamp has an operating capacity of 14,000 lbs while the larger operates at 20,500 lbs. Chrome-Moy 387 Grade 22 bar stock was used with A193 Grade B7 bolting to accommodate high temperature operating conditions.

Do you see a need for riser clamps in your current or future project? Get pricing now!