Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
Rollers — The Pipe Supports Blog
Posts Tagged ‘Rollers’

Trapeze Roller Hangers for a Food Processing Facility

April 24th, 2017 Comments off

Trapeze Roller Hangers for a Food Processing Facility

Type: Trapeze Roller Hangers
Size: 2-5/8″ to 16-3/8″ L x 4″ to 16″ Dia. | 600 to 3,970 lb. Load
Material: Cast Iron
Testing: Standard quality control inspections

Piping Technology & Products designed these trapeze roller hangers for a food processing facility in Kentucky. These rollers range from 2-5/8″ to 16-3/8″ in length and 4″ to 16″ in diameter. They are comprised of cast iron roll and sockets, steel roll rod, continuous thread rods and hex nuts. The rollers are for pipe sizes ranging from 2″ to 16″ and load ratings from 600 to 3,970 lb. Standard quality control inspections were performed prior to shipment.

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

November 7th, 2016 Comments off

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

Type: Pipe Roller Stands
Design: 1,000 lb. Load | 30″ Dia. Pipe | 18-3/4″ x 13″ x 10-3/16″ BOP
Material: Stainless Steel
Function: For support of piping that expands and contracts longitudinally and where vertical adjustment is not necessary.

Piping Technology & Products, Inc. designed pipe roller stands fabricated from stainless steel for a wastewater treatment plant. Each roller has two spring housings with eight springs in each. They are designed for an operating load of 1,000 lb. on a 30″ diameter pipeline. The rollers measure 18-3/4″ x 13″ x 10-3/16″ BOP and went through quality control inspection and tests prior to shipment.

Eight Polyurethane Pipe Rollers for a Gas Plant

May 20th, 2005 No comments
Eight Polyurethane Pipe Rollers for a Gas Plant

Eight Polyurethane Pipe Rollers for a Gas Plant

Piping Technology & Products, Inc. designed and manufactured eight polyurethane pipe rollers for a gas plant in California. These 24 non-conductive pipe rollers are fabricated from polyurethane. They were pre-tested for an operation load of 6,100 lbs. The purpose of these polyurethane pipe rollers is to support gas piping where a non-conductive support is required.

Do you require pipe rollers in your piping system? Let us price them for you today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy