Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Sway Braces — The Pipe Supports Blog

Shock Control, Restraint & Support Devices Webinar

June 9th, 2016 Comments off

This webinar is over, view the recording in the webinar archives

140,000 lb. Load Adjustable Hydraulic SnubbersExplore the various applications of snubbers, sway braces and sway struts in piping systems and equipment. Learn how these products help prevent pipe system failure due to seismic loads, flow transients, wind loads, safety valve thrust loads or pipe rupture. Discover the various tests performed within PT&P’s facility to ensure product quality, including cycle testing, travel testing and load testing. Finally, view the value-added services offered by PT&P and rest assure that your shock control, restraint and support device needs can be covered by our 24×7 web-based emergency services, field services and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 13 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

Custom Sway Brace and Variable Spring Assemblies Designed for an Aerospace Development Facility

April 8th, 2013 Comments off

Custom Sway Brace and Variable Spring Assemblies Designed for an Aerospace Development Facility

These custom designed sway braces and variable spring assemblies were designed for hanger duct work in an aerospace development facility. The assemblies measure 67-1/2″ long with a 14-1/8″ O.D. The variables are a modified F-type spring with a pivoting base and non-standard coil combination, including a nested spring design. The assemblies include fully adjustable travel stops and custom end brackets. They are fabricated from carbon steel and designed for load ranges between 1100 lb. and 9250 lb. with a spring rate of +/- 2.78″.

Custom Sway Braces with Ball Joints for a Refinery

July 6th, 2010 No comments
Custom Sway Braces with Ball Joints for a Refinery

Custom Sway Braces with Ball Joints for a Refinery

28 sway braces were custom designed from a combination of carbon steel and A-5160 spring steel. Custom design and fabrication was required due to the design loads and movements exceeding the largest standard sway brace assembly. The application required ball joint ends because the angle of incline exceeded the maximum five degree angle. The largest of the sway braces was designed for an operating load of 10,000 lb. with a travel range of 5″ in either compression or extension. Each sway brace was load and travel tested prior to shipping to ensure functionality throughout the entire travel range.

Do you require custom or standard sway braces in your plant? Get pricing today!
request-a-quote

Custom Sway Brace Supports

March 30th, 2010 No comments
Custom Sway Brace Supports

Custom Sway Brace Supports

The sway braces will be used in pairs to support a 72″ diameter cooling tower supply line via a common attachment point. The internal components and housing are fabricated from carbon steel, and A-5160 spring steel was used for the coil. Each sway brace has a spring rate of 10,100 lb/in. with an overall available travel of 3″. The adjustable ends are configured so that one end bracket is interlocked with the mating end bracket of its sister sway brace; therefore, enabling them to be connected to the pipe by a single lug.

Do you require sway braces for an upcoming project? Let us price them for you today!
request-a-quote

48 Sway Braces for a Refinery Expansion Project.

October 27th, 2009 No comments
48 Sway Braces for a Refinery Expansion Project

48 Sway Braces for a Refinery Expansion Project

The carbon steel sway braces for this project range in length from 88-3/8″ to 95-3/4″. The largest sway brace has an operating load of 18,000 lb., a design travel of 12″ in either compression or extension, and a spring rate of 1416 lb. per inch. The smallest sway brace has an operating load of 7000 lb., a design travel of 8″ in either compression or extension, and a spring rate of 1000 lb. per inch.

The anticipated loads and movements exceed those of the largest standard PT&P sway brace; therefore, these sway braces required a custom design and fabrication. Each of the 48 sway braces are configured with a unique combination of spring coils, housings, and internal components to accommodate the non-standard loads and movements.

Do you require sway braces for a current or upcoming project? Let us price them for you!
request-a-quote

126″ Long Sway Braces for a Power Plant

April 22nd, 2009 No comments
126" Long Sway Braces for a Power Plant

126" Long Sway Braces for a Power Plant

126" Long Sway Braces for a Power Plant

Sway Braces

These PT&P sway braces are fabricated from carbon steel and measure 126″ from pin to pin. They use an integral piston assembly with guide to eliminate any buckling and/or misalignment during extension and compression. The sway braces are designed for 10 1/2″ of travel and a load of 1,500 lb. A combination of standard spring coils is used to achieve the required spring rate of 150 lb./in.

Prior to shipment, a test was performed using a hydraulic ram. This test simulated actual field conditions and allowed the sway brace to move through the entire travel range in both compression and extension modes.

Want to learn more about sway braces? Watch a shock & vibration control webinar now!
access-our-webinar-archives

Sway Braces with Ball Joints

September 13th, 2006 No comments
Sway Braces with Ball Joints

Sway Braces with Ball Joints

Sway Braces with Ball Joints

Sway Braces with Ball Joints

These special sway braces that are subject to the banana effect were designed to specific requirements for a Coker Plant in Texas. With deflection capability of up to plus or minus 9″ in all directions, these sway braces are used to stabilize tall stacks. Five springs in tandem prevent binding during operation, and are necessary due to extreme length. The sway braces ranged from 70″ to 144″ in length and can handle up to 8,000 lbs. The precision machined pivoting ball joints positioned at each end allow for freedom of movement in any unpredictable direction.

Do you see a need for sway braces in your current job? Get pricing today!
request-a-quote


Sway Braces for Petroleum Company in Louisiana

December 14th, 2001 No comments
Sway Braces for Petroleum Company in Louisiana

Sway Braces for Petroleum Company in Louisiana

Piping Technology & Products, Inc. specially designed and fabricated ten sway braces, with total travel distance of 14, for a petroleum company in Louisiana.

The standard PT&P braces have springs that allow 3 of total travel distance. These sway braces were custom designed to provide total travel distance of 5 and 14. The center-to-center dimensions ranged from 92¼” to 115″ with internal supports to prevent buckling. The desired spring rates for the sway braces were 450 lb./in. and 1350 lb./in. The custom sway brace assemblies comprised of pipes (for spring housing), springs (sizes dependent on spring rate and total travel) and in some cases, ball joints.

Do you need sway braces for an upcoming project? Request a price quote today!

request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy