Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Tank — The Pipe Supports Blog

26" Hot Water Expansion Tank for a Compressor Station

September 26th, 2007 No comments

 

 

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank

- Material: .25″ Thick Carbon Steel
- Design Pressure: 50 PSIG
- Design Temperature: 200 F
- Capacity: 170 Gallons

Do you require a vessel or tank for your current or upcoming job? Get pricing today!
request-a-quote


Categories: Pressure Vessels/Tanks Tags: ,

60" Diameter Air Tank for a Manufacturing Facility

July 22nd, 2005 No comments

 

60" Diameter Air Tank for a Manufacturing Facility

60" Diameter Air Tank for a Manufacturing Facility

Side View of Air Receiver Tank

Side View of Air Receiver Tank

Sweco Fab, Inc. recently fabricated an Air Receiver Tank for a Manufacturing Facility in Alabama. This 5,400 lbs tank measured 60″ 143″ tangent to tangent and was designed for 170 PSIG and 200 F. It was fabricated from SA516-70 carbon steel. The interior and exterior were painted with standard epoxy paint to provide an interior lining and exterior protection. The tank was hydrotested at 221 PSIG to ensure product quality.

Want to learn more about products from Sweco Fab? View a past webinar today!


access-our-webinar-archives



Categories: Pressure Vessels/Tanks Tags:

Sludge Tank Vent Ducts

August 16th, 2002 No comments
Sludge Tank Vent Ducts

Sludge Tank Vent Ducts

Sweco Fab, Inc. recently designed and manufactured sludge tank vent ducts for a development project in Chad, Africa.

Due to the thin wall and height of the cylinder shell it was required to add a stiffing ring between the cylinder shell and flange. Each duct was 12 ¼” I.D. x 104 7/8″ high and weighed approximately 96 pounds. They were painted inside and out per System 6E grey color.

Learn more about Sweco Fab, Inc. and it’s products by visiting our webinar archives today!



access-our-webinar-archives



16’ Dia. x 20’ Carbon Steel Storage Tank

May 11th, 2001 No comments
16’ Dia. x 20’ Carbon Steel Storage Tank

16’ Dia. x 20’ Carbon Steel Storage Tank

Dual cranes are required to lift the pictured 16’ x 20’ Carbon Steel Storage Tank to a flatbed eighteen-wheeler for transportation to the paint yard.Upon completion of painting and lining it will be shipped to a major producer of caustic soda in Corpus Christi, South Texas Area.

This is one of many (similar type) tanks and pressure vessels supplied for a recent plant expansion.

Learn more about tanks and vessels from our webinar archives.




access-our-webinar-archives



Categories: Pressure Vessels/Tanks Tags:

Steam Drums

December 5th, 1994 No comments
Steam Drums

Steam Drums

Sweco Fab, Inc. designed and fabricated several steam drums for the Melamine Project at Donaldsonville, Louisiana.

Want to learn more about our products? Visit our webinar archives today!

access-our-webinar-archives

Categories: Pressure Vessels/Tanks Tags: ,

120” Diameter Carbon Steel Storage Vessel

October 5th, 1994 No comments
120” Diameter Carbon Steel Storage Vessel

120” Diameter Carbon Steel Storage Vessel

Pictured above is a deaerator built by Sweco Fab, Inc. and is destined to go into service for one of the larger chemical companies at their Plaquemine, Louisiana Fields.

The upper vessel shown is a 120” diameter 304L stainless unit connected to a 144” carbon steel storage tank of approximately 38,000 lb.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote


Sweco Fab, Inc. Aids in the Expansion of Sims Bayou

May 1st, 1994 No comments
Carbon Steel Tank

Carbon Steel Tank

Pictured above is one of the six identical tanks Sweco Fab, Inc. supplied for the expansion of City of Houston’s Sims Bayou Waste Treatment Plant.

These carbon steel tanks are rubber lined and have a special paint outside. Each tank has 6,000 gallon capacity.

Do you require ASME pressure vessels or tanks? Let us price them for you today!

request-a-quote


Categories: Pressure Vessels/Tanks Tags:

Specially Designed and Fabricated Tanks

March 9th, 1994 No comments
Specially Designed and Fabricated Tanks

Specially Designed and Fabricated Tanks

Shown above is one of three neutralization tanks engineered and fabricated by Sweco Fab, Inc. This particular tank is being shipped to the paint contractor for painting and special interior coating.

These tanks are 12 feet in diameter, 39 feet 7 inches high, and have a storage capacity of 25,000 gallons. Special features requested by the client include clips welded on the interior for mounting of headers.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote

Tanks Mounted on Trucks

November 12th, 1993 No comments
Tanks Mounted on Trucks

Tanks Mounted on Trucks

The picture above show the replacement of a tank mounted on a truck by the Sweco Fab division of Piping Technology & Products, Inc. In this case the customer delivered the damaged tank to our site so measurements of the mounting could be obtained. The old tank (upper left) was damaged beyond repair when a vacuum was inadvertently created inside the tank.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote

Categories: Pressure Vessels/Tanks Tags:

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy