The Pipe Supports Blog » Tank http://www.pipingtech.com/blog View standard and custom designed pipe supports from our past projects. Look at up-close pictures of variable spring hangers, constants and big ton springs. Read the project details, including specifications for a wide range of engineered products and services for various industries and applications. Tue, 22 May 2012 22:03:02 +0000 en hourly 1 http://wordpress.org/?v=3.1 26" Hot Water Expansion Tank for a Compressor Station http://www.pipingtech.com/blog/2007/09/26/26-hot-water-expansion-tank-for-a-compressor-station/ http://www.pipingtech.com/blog/2007/09/26/26-hot-water-expansion-tank-for-a-compressor-station/#comments Wed, 26 Sep 2007 15:33:27 +0000 sylvibarra http://pipesupportsblog.com/?p=686  

 

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank

- Material: .25″ Thick Carbon Steel
- Design Pressure: 50 PSIG
- Design Temperature: 200 F
- Capacity: 170 Gallons

Do you require a vessel or tank for your current or upcoming job? Get pricing today!
request-a-quote

]]> http://www.pipingtech.com/blog/2007/09/26/26-hot-water-expansion-tank-for-a-compressor-station/feed/ 0 60" Diameter Air Tank for a Manufacturing Facility http://www.pipingtech.com/blog/2005/07/22/60-diameter-air-tank-for-a-manufacturing-facility/ http://www.pipingtech.com/blog/2005/07/22/60-diameter-air-tank-for-a-manufacturing-facility/#comments Fri, 22 Jul 2005 15:42:58 +0000 Ray http://pipesupportsblog.com/?p=692  

60" Diameter Air Tank for a Manufacturing Facility

60" Diameter Air Tank for a Manufacturing Facility

Side View of Air Receiver Tank

Side View of Air Receiver Tank

Sweco Fab, Inc. recently fabricated an Air Receiver Tank for a Manufacturing Facility in Alabama. This 5,400 lbs tank measured 60″ 143″ tangent to tangent and was designed for 170 PSIG and 200 F. It was fabricated from SA516-70 carbon steel. The interior and exterior were painted with standard epoxy paint to provide an interior lining and exterior protection. The tank was hydrotested at 221 PSIG to ensure product quality.

Want to learn more about products from Sweco Fab? View a past webinar today!


access-our-webinar-archives



]]> http://www.pipingtech.com/blog/2005/07/22/60-diameter-air-tank-for-a-manufacturing-facility/feed/ 0 Sludge Tank Vent Ducts http://www.pipingtech.com/blog/2002/08/16/sludge-tank-vent-ducts/ http://www.pipingtech.com/blog/2002/08/16/sludge-tank-vent-ducts/#comments Fri, 16 Aug 2002 14:49:32 +0000 justino http://pipesupportsblog.com/?p=643 Sludge Tank Vent Ducts

Sludge Tank Vent Ducts

Sweco Fab, Inc. recently designed and manufactured sludge tank vent ducts for a development project in Chad, Africa.

Due to the thin wall and height of the cylinder shell it was required to add a stiffing ring between the cylinder shell and flange. Each duct was 12 ¼” I.D. x 104 7/8″ high and weighed approximately 96 pounds. They were painted inside and out per System 6E grey color.

Learn more about Sweco Fab, Inc. and it’s products by visiting our webinar archives today!



access-our-webinar-archives



]]> http://www.pipingtech.com/blog/2002/08/16/sludge-tank-vent-ducts/feed/ 0 16’ Dia. x 20’ Carbon Steel Storage Tank http://www.pipingtech.com/blog/2001/05/11/16%e2%80%99-dia-x-20%e2%80%99-carbon-steel-storage-tank/ http://www.pipingtech.com/blog/2001/05/11/16%e2%80%99-dia-x-20%e2%80%99-carbon-steel-storage-tank/#comments Fri, 11 May 2001 16:00:55 +0000 rakesh http://pipesupportsblog.com/?p=703 16’ Dia. x 20’ Carbon Steel Storage Tank

16’ Dia. x 20’ Carbon Steel Storage Tank

Dual cranes are required to lift the pictured 16’ x 20’ Carbon Steel Storage Tank to a flatbed eighteen-wheeler for transportation to the paint yard.Upon completion of painting and lining it will be shipped to a major producer of caustic soda in Corpus Christi, South Texas Area.

This is one of many (similar type) tanks and pressure vessels supplied for a recent plant expansion.

Learn more about tanks and vessels from our webinar archives.




access-our-webinar-archives



]]> http://www.pipingtech.com/blog/2001/05/11/16%e2%80%99-dia-x-20%e2%80%99-carbon-steel-storage-tank/feed/ 0 Steam Drums http://www.pipingtech.com/blog/1994/12/05/steam-drums/ http://www.pipingtech.com/blog/1994/12/05/steam-drums/#comments Mon, 05 Dec 1994 17:19:23 +0000 rakesh http://pipesupportsblog.com/?p=716 Steam Drums

Steam Drums

Sweco Fab, Inc. designed and fabricated several steam drums for the Melamine Project at Donaldsonville, Louisiana.

Want to learn more about our products? Visit our webinar archives today!

access-our-webinar-archives

]]> http://www.pipingtech.com/blog/1994/12/05/steam-drums/feed/ 0 120” Diameter Carbon Steel Storage Vessel http://www.pipingtech.com/blog/1994/10/05/120%e2%80%9d-diameter-carbon-steel-storage-vessel/ http://www.pipingtech.com/blog/1994/10/05/120%e2%80%9d-diameter-carbon-steel-storage-vessel/#comments Wed, 05 Oct 1994 16:16:09 +0000 Ray http://pipesupportsblog.com/?p=714 120” Diameter Carbon Steel Storage Vessel

120” Diameter Carbon Steel Storage Vessel

Pictured above is a deaerator built by Sweco Fab, Inc. and is destined to go into service for one of the larger chemical companies at their Plaquemine, Louisiana Fields.

The upper vessel shown is a 120” diameter 304L stainless unit connected to a 144” carbon steel storage tank of approximately 38,000 lb.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote

]]> http://www.pipingtech.com/blog/1994/10/05/120%e2%80%9d-diameter-carbon-steel-storage-vessel/feed/ 0 Sweco Fab, Inc. Aids in the Expansion of Sims Bayou http://www.pipingtech.com/blog/1994/05/01/sweco-fab-inc-aids-in-the-expansion-of-sims-bayou/ http://www.pipingtech.com/blog/1994/05/01/sweco-fab-inc-aids-in-the-expansion-of-sims-bayou/#comments Sun, 01 May 1994 16:10:01 +0000 sylvibarra http://pipesupportsblog.com/?p=709 Carbon Steel Tank

Carbon Steel Tank

Pictured above is one of the six identical tanks Sweco Fab, Inc. supplied for the expansion of City of Houston’s Sims Bayou Waste Treatment Plant.

These carbon steel tanks are rubber lined and have a special paint outside. Each tank has 6,000 gallon capacity.

Do you require ASME pressure vessels or tanks? Let us price them for you today!

request-a-quote

]]> http://www.pipingtech.com/blog/1994/05/01/sweco-fab-inc-aids-in-the-expansion-of-sims-bayou/feed/ 0 Specially Designed and Fabricated Tanks http://www.pipingtech.com/blog/1994/03/09/specially-designed-and-fabricated-tanks/ http://www.pipingtech.com/blog/1994/03/09/specially-designed-and-fabricated-tanks/#comments Wed, 09 Mar 1994 17:12:47 +0000 justino http://pipesupportsblog.com/?p=711 Specially Designed and Fabricated Tanks

Specially Designed and Fabricated Tanks

Shown above is one of three neutralization tanks engineered and fabricated by Sweco Fab, Inc. This particular tank is being shipped to the paint contractor for painting and special interior coating.

These tanks are 12 feet in diameter, 39 feet 7 inches high, and have a storage capacity of 25,000 gallons. Special features requested by the client include clips welded on the interior for mounting of headers.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote

]]> http://www.pipingtech.com/blog/1994/03/09/specially-designed-and-fabricated-tanks/feed/ 0 Tanks Mounted on Trucks http://www.pipingtech.com/blog/1993/11/12/tanks-mounted-on-trucks/ http://www.pipingtech.com/blog/1993/11/12/tanks-mounted-on-trucks/#comments Fri, 12 Nov 1993 17:06:57 +0000 Ray http://pipesupportsblog.com/?p=707 Tanks Mounted on Trucks

Tanks Mounted on Trucks

The picture above show the replacement of a tank mounted on a truck by the Sweco Fab division of Piping Technology & Products, Inc. In this case the customer delivered the damaged tank to our site so measurements of the mounting could be obtained. The old tank (upper left) was damaged beyond repair when a vacuum was inadvertently created inside the tank.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote

]]> http://www.pipingtech.com/blog/1993/11/12/tanks-mounted-on-trucks/feed/ 0