A total of 90 variable spring supports were designed and manufactured to support pipe lines in a gas storage facility in Abu Dhabi. The pictures above show PTP-4 Double Spring B-Type, PTP-6 Triple Springs B-Type, PTP-1 Triple Springs D-Type, and PTP-4 Double Springs F-Type, (also known as F-Cans). Load capacities range from 1,000 lb. to 45,000 lb., and movements range from 3/8″ to 3″. A two-layer custom paint was applied over the hot-dip galvanized finish to protect against a severely corrosive environment. Travel stops were chained to the spring can housing, so they can be reused during plant shutdowns. Load and quality assurance tests were performed on all the supports prior to shipment.
Need variable spring supports for your piping system? Get pricing today.
Furnace Spring Assemblies up to 13,000 lbs. for a Chemical Refinery
Piping Technology and Products, Inc. designed and manufactured furnace spring assemblies for a chemical refinery in Saudi Arabia. Each pipe hanger assembly consists of a variable spring, rod, clevis, hex nuts, and pipe attachments. Unlike other variable springs which are designed to have bolted housings, these furnace springs are designed for spring coils with a customer specified spring rate installed in a welded housing. The sizes of these Fig. PTP-2 and Fig. PTP-4 ranged from 90-170, with a total travel of 1 1/4″ to 5″, and loads varying from 850 lbs to 13,300 lbs.
Furnace Spring Assemblies up to 13,000 lbs. for a Chemical Refinery
Prior to the final welding, trial fit-up and cycle test were performed to ensure unrestrained movement throughout the designed travel range. The spring assemblies were then calibrated to determine the exact spring rate prior to shipping.
Do you have a need for furnace springs in your current or future job? Get pricing now!
60,000 Lb. Load Type "B" Variable Spring Hangers
PT&P specially designed two Type “B” variable spring hangers (2-250-B) for an oil company in Ryazan, Russia. These variable spring hangers were custom designed to support a load of 60,000 lbs. with a spring rate of 3,648 lbs./in. respectively. Due to loading requirements, these variable spring hangers were also designed to accommodate a travel of 1″, upward movement.
Are variable spring hangers a necessity for your next project? Get pricing now!
Engineered Spring Hanger for Reformer Furnace in Venezuela
Engineered spring hangers shown are being calibrated and tested at Piping Technology & Products, Inc., Houston, Texas Facility. A digital load cell is attached to the hydraulic press that guarantees calibration to the exact loads specified. The spring hanger will support the tubes in a reformer furnace destined for Venezuela.
Looking for some new engineered spring hangers? Let us price one for you today!
