Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Variable Spring Support Assemblies — The Pipe Supports Blog
Posts Tagged ‘Variable Spring Support Assemblies’

Variable Springs with Guided Load Columns and PTFE Lined Pipe Saddles

March 2nd, 2012 Comments off

Variable Springs with Guided Load Columns and a PTFE Lined Pipe Saddles

These F-type variable spring supports are fabricated from carbon steel with a hot dipped galvanized finish and designed with guided load columns to provide stability for minimum lateral movement. The fig. 46 pipe saddles are also fabricated from carbon steel with a HDG finish and lined with PTFE, 25% glass filled material. The pipe saddles are designed for 8″ to 36″ diameter pipe sizes, and the entire assembly is 50″ in height. These variable-saddle support assemblies are capable of supporting up to 22,300 lb. and 1″ vertical movements. We performed standard spring loading tests and a Q.C. inspection prior to shipping to an offshore oil and gas platform near Malaysia.

5′ 7-1/2″ Tall F-Type Variable Spring Support Assemblies for an Oil Refinery in California

December 22nd, 2009 No comments
5′ 7-1/2″ Tall F-Type Variable Spring Support Assemblies

5′ 7-1/2″ Tall F-Type Variable Spring Support Assemblies

PT&P designed and fabricated F-type variables for an oil refinery in California. The variable springs are designed for an operating load of 49,771 lb. and an installed load of 43,000 lb. Two coils are used in tandem to achieve a vertical movement of 1-5/8″ downward. The variables are fabricated from hot-dipped galvanized carbon steel and are customized with an extended load column to reach an installed height of 67-1/2″. The variables for this project are the largest standard double springs offered; however, PT&P can customize to any load specification. Standard load testing was performed prior to shipment.

Want to learn more about variable springs? Instantly view a past variables webinar!
access-our-webinar-archives

Variable Assemblies with Pre-Insulated Pipe Clamps

April 11th, 2003 No comments
Variable Assemblies with Pre-Insulated Pipe Clamps

Variable Assemblies with Pre-Insulated Pipe Clamps

Variable Assemblies with Pre-Insulated Pipe Clamps

Pre-Insulated Pipe Clamp

Piping Technology & Products, Inc. designed and manufactured several variable assemblies with pre-insulated pipe clamps for a chemical company in Texas. These assemblies are constructed of galvanized carbon steel hangers and hardware with Marinite® insulation.  The fabricated clamps range in size from 10″ to 30″, insulation thickness of 1″ to 8″ and with spring hanger sizes 80-180 standard, double, and triple variable spring hangers.

Do you require variable springs or pre-insulated pipe clamps? Let us price them for you today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy