Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Vessel — The Pipe Supports Blog

ASME Code Pressure Vessels

December 10th, 2008 No comments
ASME Code Pressure Vessels

ASME Code Pressure Vessels

These molecular sieve vessels are designed for a biofuel production line. They are fabricated from stainless steel with carbon steel base rings. The vessels have an outside diameter of 24″ and measures 214″ in length. The maximum allowable working pressure is 123 PSIG @ 400ºF. These ASME Code pressure vessels were hydro-tested at 160 PSIG and x-ray tested prior to being shipped to the customer.

Do you require ASME pressure vessels or tanks? Let us price them for you today!
request-a-quote

Categories: Pressure Vessels/Tanks Tags:

26" Hot Water Expansion Tank for a Compressor Station

September 26th, 2007 No comments

 

 

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank

– Material: .25″ Thick Carbon Steel
– Design Pressure: 50 PSIG
– Design Temperature: 200 F
– Capacity: 170 Gallons

Do you require a vessel or tank for your current or upcoming job? Get pricing today!
request-a-quote


Categories: Pressure Vessels/Tanks Tags: ,

108" I.D. x 144" T-T Vessel

August 16th, 2001 No comments
108" I.D. x 144" T-T Vessel

108" I.D. x 144" T-T Vessel

Sweco Fab, Inc., the ASME code fabrication shop for Piping Technology & Products, Inc., specially designed and fabricated a 108″ I.D. x 144″ T-T vessel for the Texas A&M University. The “Aggie Vessel” will be used for special research project at the university. A 24″ T-bolt closure was used for access to the vessel and two stiffner rings were installed to withstand vacuum application. Unique internal design was also applied to facilitate special equipment installation. Helium leak test at 1×10-6 cc/sec will be performed to detect leakage.

Are you in need of a vesssel? Request a quote today!

request-a-quote


48" Diameter x 96" S/S Vertical Carbon Steel Filter Vessels

July 6th, 2001 No comments

 

48" Diameter x 96" S/S Vertical Carbon Steel Filter Vessels

48" Diameter x 96" S/S Vertical Carbon Steel Filter Vessels

48" Diameter x 96" S/S Vertical Carbon Steel Filter Vessels

Vessels

Sweco Fab, the ASME fabrication shop of Piping Technology & Products, Inc., specially designed and manufactured three steel, rubber-lined vessels for a MTBE manufacturer located in Deer Park, TX.

The carbon steel filter vessels were designed with rubber linings in order to help prevent or delay corrosion within. The vessels are 48″ diameter x 96″ s/s vertical and built to ASME. All vessels underwent hydrostatic testing in order to detect leaks (see Figure 2).

Need a vessel for an upcoming project? Get pricing today!

request-a-quote


Steam Drums

December 5th, 1994 No comments
Steam Drums

Steam Drums

Sweco Fab, Inc. designed and fabricated several steam drums for the Melamine Project at Donaldsonville, Louisiana.

Want to learn more about our products? Visit our webinar archives today!

access-our-webinar-archives

Categories: Pressure Vessels/Tanks Tags: ,

120” Diameter Carbon Steel Storage Vessel

October 5th, 1994 No comments
120” Diameter Carbon Steel Storage Vessel

120” Diameter Carbon Steel Storage Vessel

Pictured above is a deaerator built by Sweco Fab, Inc. and is destined to go into service for one of the larger chemical companies at their Plaquemine, Louisiana Fields.

The upper vessel shown is a 120” diameter 304L stainless unit connected to a 144” carbon steel storage tank of approximately 38,000 lb.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote


ASME Code Surge Protection Vessel

April 15th, 1994 No comments

 

ASME Surge Protection Code Vessel

ASME Surge Protection Code Vessel

The photograph above shows a surge protection vessel fabricated to ASME code specifications by Sweco Fab, Inc. This vessel was purchased by a major Houston E&C firm for export to an overseas project.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote


Specially Designed and Fabricated Tanks

March 9th, 1994 No comments
Specially Designed and Fabricated Tanks

Specially Designed and Fabricated Tanks

Shown above is one of three neutralization tanks engineered and fabricated by Sweco Fab, Inc. This particular tank is being shipped to the paint contractor for painting and special interior coating.

These tanks are 12 feet in diameter, 39 feet 7 inches high, and have a storage capacity of 25,000 gallons. Special features requested by the client include clips welded on the interior for mounting of headers.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy