Piping Technology and Products Logo

Piping Technology & Products

 
  Experienced Manufacturer of Pipe Supports since 1975.
Call Us: Phone: (713) 731-0030 Toll-Free: (800) 787-5914
 

Home » Categories » Engineered Spring Supports

How do I set (load) a spring support?

In order to set (load) a spring support, you must ensure that the pipe system is at its cold (installed) state. (All hydro-testing has been completed.) At this point, with variable springs, the lower travel stops should be removed. Adjust the load at the load column of the spring so that a load slightly above the cold load is reached. The remaining travel stops can now be removed. Note: Excessive force should not be required to remove the travel stops at this time.

See Video on How to Remove Travel Stops from a Variable

See Video on How to Remove Travel Stops from a Variable.

Related Articles RSS Feed
Can the constant travel or capacity change other than by overheating the spring?
Viewed 2785 times since Thu, Nov 3, 2011
What do you use to coat furnace springs?
Viewed 1065 times since Fri, May 16, 2014
What is meant by "rod take-out" in spring supports?
Viewed 6772 times since Tue, Nov 2, 2010
How do I check the load setting of a spring support?
Viewed 5110 times since Tue, Nov 2, 2010
What does the hot or cold setting mean on a constant spring support?
Viewed 10422 times since Tue, Nov 2, 2010
How does a spring pipe support work?
Viewed 7771 times since Wed, Feb 23, 2011
What is a cold spring?
Viewed 7400 times since Wed, Jun 22, 2011
Are Big Ton’s springs parallel to one another or in a series?
Viewed 1906 times since Fri, Jan 25, 2013
How does the height of the base (F-type) spring have to be specified with downward movement?
Viewed 3489 times since Thu, Oct 27, 2011
How do you tighten a spring can?
Viewed 4283 times since Thu, Jun 16, 2011
Facebook


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows Metallic & Fabric Expansion Joints, Bellows | Sweco Fab ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields Pre-Insulated Pipe Supports, Slides, Guides & Anchors | Fronek Anchor/Darling
Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 E-MAIL: info@pipingtech.com

Copyright 2011 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy