Piping Technology and Products, Inc. designed and manufactured 240 PT&P Figure 110 welded eye rods for an ammonia plant in Saudi Arabia. The rods will be attached to Type A variable springs designed to support loads from 850 lb. to 13,300 lb. Manufactured from A-36 carbon steel, the rods are 3/4” to 2” in diameter and range in length from 68” to 95”. To prevent contamination at high temperatures, a red oxide primer with an alkyd topcoat was applied to the rods as per the customer's request. Prior to shipment, a 100% dye-penetrant test was performed to ensure quality.