|
|
|
| |
U.S. Bellows, Inc. Designed and Fabricated a Single Reinforced Expansion Joint for an Oil Refinery in Saudi Arabia.(PT&P Ref #00683-A1, RF)01/11/2006
|
 |
 |
| Expansion Joint Testing |
Expansion Joint Testing |
This single reinforced expansion joint is 16” in diameter and is 15 1/8” in length. The expansion joint is fabricated with 316L stainless steel bellows, liner, weld ends, and bellows reinforcement. This expansion joint weighs 170 lbs and is used in a feed pre-heater. It is designed and fabricated to ASME Section VIII for 581 PSIG at 842°F with a travel capacity of 0.496” compression. 100% Dye Penetrate testing was performed for the bellow attachment welds as well as 100% X-Ray testing on the long seam welds of the bellows and pipe ends. In addition, Hydro-testing was performed at 764 PSIG to assure quality and performance.
For additional information on similar products, please refer to the product section.
|
| |
| |
|

|
|
|