Insulated Pipe Supports for a High Temperature Pipeline by Pipe Shields, Inc.

January 23, 2024

Insulated Pipe Supports for a High Temp. Pipeline by Pipe Shields, Inc.

Type: Pre-Insulated Pipe Supports “Hot Shoes”
Size: 1″ to 3″ NPS | 1″ to 2″ Thick Insulation
Material: HDG Carbon Steel | Calcium Silicate
Design: Operating Temp.up to 1800°F
Operating Loads up to 1000 lb.
Movements of +/- 4-1/2″
Testing: Standard Q.C. Inspections

Pipe Shields, Inc., a division of PT&P, custom-designed insulated pipe supports for high temperatures in a chemical plant. These "hot shoes" are fabricated from A36 carbon steel and include a hot-dipped galvanized finish. They range in nominal pipe sizes from 1" to 3" and include 1"-2" thick calcium silicate insulation. The supports are designed for an operating temperature up to 1800°F and operating loads up to 1000 lb, with +/- 4 -1/2 movement. Quality control inspections were performed before shipping to Indiana.

Pipe Shields Inc. pioneered the design and manufacture of pre-insulated pipe supports, slides, guides and anchors and is a subsidiary of Piping Technology and Products, Inc. Our products are ubiquitous, serving diverse industries including hospitals, airports, semiconductor plants, automotive plants, EV battery plants, data centers, pharmaceutical plants, food processing, petrochemical plants, and power and renewable energy plants sometimes used in cold service lines and some dual temp lines between TCUs (temperature control units) and reactor jackets. Engineers often specify Pipe Shields and PT&P products as the foundation for designing various piping systems.

Last year we built over 50,000 units of this kind of support in our Houston-based manufacturing facility. We were the first in the industry to employ the use of high-speed manufacturing automation to facilitate the cutting of the high-density calcium silicate to meet tight deliveries required for the projects. The advent of computer-controlled cutting equipment has improved how we do things at PT&P. Integrating these advanced technologies has led to significant improvements in manufacturing processes, enabling unparalleled accuracy in cutting high-density insulation. Computer-controlled cutting equipment allows for intricate and complex designs that were once challenging or impossible to achieve manually. Automating cutting processes has not only reduced human error but also enhanced productivity by accelerating production speeds. Moreover, these systems provide a high level of repeatability, ensuring consistent quality across multiple iterations. Another benefit was that we were able to reduce the material waste generated by human cutting by roughly 10-15%, which allowed us to remain price-competitive on a global scale.

PT&P REF. ORIGINAL POST 05262020

Read More

Custom-Designed Hot Shoes

August 15, 2023

Hot Shoe Custom Designed for a 16-inch pipeline for a mining facility in the Caribbean

Type: Pre-Insulated Pipe Supports “Hot Shoes”
Size: 18″ Length | 16″ Dia. | 4″ Insulation
Material: A240 Gr. 304 L Stainless Steel | Firetemp®
Design: 25,000 lb. – 50,000 Load
Testing: Standard Q.C. Inspections

Piping Technology & Products, Inc. designed and manufactured pre-insulated pipe supports for a high-temperature pipeline for a gold mine. Our subsidiary, Pipe Shields, created this category and family of products.

The “hot shoes” are 16″ in diameter, including 4″ of insulation, and are 18″ in length. They are fabricated from A240 Gr 304 L stainless steel and high-density calcium silicate insulation. The insulation material is noncombustible and can be supplied in varying densities to accommodate different loading applications. This type of insulated support is also utilized in lithium battery plants, automotive manufacturing, data centers, semiconductor manufacturing facilities, sports stadiums, hospitals, and other facilities where there are high-temperature pipelines. In many cases, these lines are for chilled water, hot water, and HVAC systems. These hot shoes are custom designed to support loads from 25,000 lb. to 50,000 lb. at an operating temperature of 1,400°F. Standard tests were performed for a three-week rush job.

For this particular project, we provided a larger scope of material in addition to the pre-insulated supports shown here. We worked with the pipe module fabricator and the EPC for the same project. The scope of material and services included engineering services, insulated supports, pipe hanger hardware, clamps, rods, guides, anchors, structural bolts, nuts, and washers. The project dates back to 2010; however, this mine has last year undergone a plant expansion and mine life extension project designed to increase throughput and allow the operation to maintain a minimum annual gold production of approximately 800,000oz until 2040.

We regularly support customers for the life of their facilities, sometimes over 40 years. We see every customer relationship as long-term and strategic so we can be part of their continued success.

PT&P REF. ORIGINAL POST 03262019

Read More

Cryogenic Pipe Saddles with Micarta® Insulation for LNG Service

August 1, 2023

Insulated Pipe Supports for Low Temperatures

PT&P manufactured cryogenic pipe saddles for LNG transportation pipelines. These types of insulated supports have been utilized in LNG plants around the world. Insulated supports are also used on cold piping in semiconductor plants or plants that make batteries to eliminate condensation.

Cryogenic Pipe Saddles with Micarta® G-10 Insulation for LNG Service

A cold shoe is a pipe support used for cryogenic applications where the transfer of cold temps from the pipeline to the surrounding steel pipe rack is not desirable. These supports can be used for temperatures down to -320° Fahrenheit.  This particular type of insulated pipe saddle assembly was fabricated with a carbon steel base plate, 304L stainless steel saddle, and an insulation block. The overall size ranges from 25” x 19” x 12-¾” to 29” x 25” x 13-3/8”. These pipe shoes were manufactured to support pipe sizes ranging in diameter from 36″ to 42″ NPS.

For additional information about Insulated Pipe Supports go to our product page.

Cryogenic Pipe Saddles Made for LNG Project

For this job, our client was a new entrant into the LNG engineering and design market space, and this was one of their capstone projects internally and for the marketplace.  Given PTP’s long history and experience concerning LNG pipe supports, we served as strategic partners in the engagement.  We identified that the client was using a pre-existing standard that underestimated the amount of Micarta® insulation thickness needed to provide adequate insulation for the facility.

PT&P engineers recognized that the insulation was not sufficient, and we tested the existing design using a test fixture we developed to demonstrate our concern.  PT&P utilized thermal scanning (infrared technology) to measure temperature at various locations around the insulated pipe support. As a result of our tests, our client corrected the concern, saving dollars, man hours, and scheduled project completion.

pipe support thermal scanning image
pipe support on test

Our work with facilities such as these are a great example of our commitment to providing clean, affordable energy to the world.

To find additional information about our Cryogenic Pipe Saddles visit our product page.

 

PT&P REF. ORIGINAL POST 03092021

Read More

Cold Shoes and Hot Shoes Designed for an Ammonia Project

June 27, 2023

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for both cryogenic and high-temperature pipe systems, with an 8" to 22" baseplate width and a 10" to 28" saddle length. They were designed for pipe diameters of 6"-24" and are composed of polyurethane foam for cryogenic and high-density calcium silicate insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

This project was a combination of upgrading a current anhydrous ammonia plant and adding new capacity to the facility. We worked with the EPC, on-site contractors, and operators to ensure specifications and delivery deadlines were met over a three-year period during project construction. In addition to the insulated supports discussed here, we designed, manufactured, and shipped bellmouth reducers, metallic expansion joints, pipe shoe guides and anchors, pipe hanger hardware, slide plates, snubbers, sway braces, struts, and variable spring supports.

PT&P REF. ORIGINAL POST 06232015

Read More

Over 4,000 Cryogenic Pre-Insulated Pipe Supports Designed for LNG Service

May 23, 2023

Over 4,000 Cryogenic Pre-Insulated Pipe Supports Designed for LNG Service

Type: Pre-Insulated Pipe Shoe & Clamp Assemblies
Material: 304 L Stainless Steel | Protective Coating | Micarta® Insulation
Design: 20″ L x 36″ W x 75″ H | 56″ Dia. Pipeline | -459°F
Testing: Load & Pull Tests

PT&P designed over 4,000 supports for LNG service in Texas. These pre-insulated pipe shoe and clamp assemblies were custom designed for cryogenic temperatures with special low-temperature grade NP500CR Micarta® insulation. This type of Micarta® consists of a glass fabric with a specially formulated epoxy resin. It has excellent physical properties at operating temperatures down to -459°F. It has very low thermal conductivity and has been produced specifically for use in cryogenic applications. The shoes pictured are fabricated from 304 L stainless steel, A193 GR. B8 bolting, with a protective coating and designed for a 56″ diameter pipeline. The shoes measure 20″ long, 36″ wide(base), and 75″ high. This project included supports varied in pipe sizes from ¾” to 56″ in diameter. Load tests were performed prior to shipping this rush order.

As a leader in the supply of pipe supports for LNG facilities, we’ve passed on to our client’s design expertise, innovations, and deliverables for over 30 years. For this project, we supplied over 90,000 pipe supports over a three-year period, including:

  • On-site field assistance to identify the material, address material shortages, and inspection
  • Constant spring supports
  • Fabricated pipe shoes, guides, and anchors
  • Insulated shoes and supports
  • Structural supports
  • Slide plates
  • Sway braces and struts
  • Variable Spring supports
  • Wear Pads

In recent years, the use of various new and improved insulating materials have helped to produce a better product, made installation easier, lowered maintenance costs, and extended the life of the support. We offer testing at our manufacturing facility in Houston utilizing thermal scanning (infrared technology) to measure temperature at various locations around the support. Often, we build the test structures that are then employed to analyze different products for improvement based on client needs and product optimization in manufacturing and design. The results often lead to design improvements that improve the efficiency of the piping system and reduction in the cost of installation in the field. We offer 24×7 web-based emergency services, providing field service and quick turn-around time when you need it most.

PT&P REF. ORIGINAL POST 11072017

Read More

Custom High-Temperature Insulated Pipe Supports with Rollers for a Vaporizer

March 21, 2023

Custom High-Temperature Insulated Pipe Supports with Rollers for a Vaporizer

Pipe Shields, Inc., a division of PT&P custom-designed insulated pipe supports with rollers for high-temperature pipelines for a Vaporizer located in Malaysia. The “hot shoes” are fabricated from A36 carbon steel and include FireTemp 28 PCF & 18 PCF. The supports are 79” OD x 18” long x 87” high and designed with Hilman rollers for supporting the pipe from below while allowing it to move axially with minimum friction. Quality control inspections were performed before shipping.

PT&P REF. ORIGINAL POST 10072020

Read More

High-Temperature Pre-Insulated Pipe Support for a Chemical Plant

December 20, 2022

Custom High-Temperature Pre-Insulated Pipe Support for a Chemical Plant

This custom-designed insulated pipe support will be used for a high-temperature pipeline at a chemical plant in Canada. This Hot Shoe was customized without the u-base and modified with an extended length. It will be used to prevent the movement of a 6″ diameter pipe in the axial direction. Axial stops will be welded to the clamp O.D. in the field. The plates are 11-5/8″ O.D. x 48″ in length and fabricated from A36 carbon steel. The insulation is 2″ thick high-density calcium silicate and well-suited for temperatures up to 1200°F. A hot shoe is a pipe support that can be used for high-temperature applications, such as high-pressure steam lines or boiler feed water, where heat loss through the pipe support is not desirable. Insulated Hot Shoes can be designed and used for temperatures up to 1400° Fahrenheit.

PT&P REF. ORIGINAL POST 06022021

Read More

High Temperature Insulated Supports for an HP Steam Header

January 4, 2022

Ptp hot shoes 150370

Type: Pre-Insulated Pipe Supports for High Temperatures “Hot Shoes”
Size: 2″ – 12″ dia. | 12″, 15″, 18″ Long | 4″ and 6″ BOP
Material: Carbon Steel | Thin Blanket Insulation | High-Density Calcium Silicate
Testing: Standard Q.C. Inspection | ANSYS Simulation

Piping Technology & Products custom-designed and fabricated pre-insulated pipe supports for a high-temperature application in an HP Steam Header located in Texas. Pre-insulated supports such as these are used in several applications ranging from semiconductor plants (addressing the current computer chip shortage) to high-temperature pipelines within plants that produce biofuels and solar power. These hot shoes range in size from 2″ to 12″ in diameter and are 12″, 15″ and 18″ long, with BOP of 4″ and 6″. The supports include a thin blanket insulation used in combination with a high-density calcium silicate insulation material. Utilizing the blanket insulation in combination with the high-density calcium silicate insulation material helped to reduce the overall costs, increased the K-factor, while also reducing the weight of these supports. We custom designed these supports using ANSYS engineering simulation for temperatures up to 844°F with an operating load up to 17,965 lb. at 732 psig. A total of 95 supports were manufactured for this project, including pipe hangers, pipe shoes with insulation and trunnion supports, as well as pipe shoe clamps without insulation. All supports were visually inspected by our Quality Control department. Piping Technology & Products offers excellent manufacturing expertise and our sister company, Pipe Shields Inc., has the engineering design and experience to assist in the development of custom pre-insulated supports or advise which of our many different supports contained in our new catalog is best for your next major project.

 

PT&P REF. ORIGINAL POST 05302017

Read More

Cold Shoe Anchor Supports with 4″ Thick G10 Micarta® Insulation

November 16, 2021

Cold Shoe Anchor Supports with 4" Thick G10 Micarta® Insulation

PT&P Cold Shoe Anchors are designed to support pipe sizes ranging from 12″ to 72″ in diameter. In this case, the supports were custom designed for one of the largest nitrogen generation systems for LNG in the Southern Hemisphere. The project employed a modular approach to its execution which included the assembly of large, complex, and heavy Process Modules as well as simple and relatively light Yard Rack Modules.

Ptp fig 4800 insulated cold shoe anchor g10
The saddles are fabricated from A240-Gr. 304L stainless steel and the base plates are fabricated from galvanized A516 Gr. 70N carbon steel. The insulation is 4″ thick G10 Micarta® material and capable of insulating from temperatures down to -300°F. G10 shoes are welded directly to the pipe spool, inspected, and tested prior to shipping which saves field installation and inspection time. G10 supports are also pretty durable making handling, transportation, and storage trouble-free. G10 Micarta® supports have an insignificant water/moisture absorption rate, meaning there is no structural deterioration in adverse weather, especially in the wake of heavy rain and storms.

G10 Micarta® supports involve fewer steps to manufacture allowing PT&P to support just in time lead times for fast-paced dynamic projects. PT&P has designed, extensively tested, and manufactured on G10 Micarta shoes for over 15 years. G10 is a preferred choice in cryogenic applications and demanding LNG environments for the following reasons:

  • Impervious to water absorption–Water intrusion into the system degrades performance and leads to many problems such as ice formation.
  • Superior Tensile and Flexural strength
  • Low Capital Expenses: Reduced field welding time, material cost, travel time, and field installation cost
  • Construction/Installation Savings: G10 pipe shoes can be sent to the pipe fabricator and welded directly to the pipe spool allowing for no inspection and testing requirements in the field.
  • Easy, trouble-free handling, transportation, and storage
  • Longer installation life and reduced maintenance needs
Read More

Pre-Insulated Pipe Supports for High Temperatures at a Phenol Plant in Texas

October 4, 2021

Pre-Insulated Pipe Supports for High Temperatures at a Phenol Plant in Texas

PT&P manufactured 48″ diameter pre-insulated pipe supports for a high-temperature pipeline at a phenol plant in Texas. Phenol is an important aromatic organic compound used in several products like plastics, nylon, epoxies, detergents, mouthwash, antiseptics, and other pharmaceutical drugs. PT&P has consistently supplied products to these types of plants for many years and has done work for most of the largest phenol plants in the world. The production of phenol from petroleum-derived feedstocks can involve temperatures, where large bore piping can reach 250°F. Phenols are used in a diverse range of end markets including construction, automotive, electronics, and fibre industries. Some other plants that utilize large bore piping at high temperatures, are Biofuels, Semiconductor, and Old Sands Extraction processing plants. These hot shoes, in particular, are designed for pipe sizes up to 48″ in diameter. They include 6″ thick by 4″ width calcium silicate insulation, hot-dipped galvanized steel, and are designed for a load of 7,000 lb. Standard quality tests were performed before shipment. At Piping Technology and Products, we can supply a wide range of different types of pipe supports to meet your design specifications. This enables our clients to order from one vendor as opposed to several different vendors to manage the supply chain for project success in the most cost-effective manner while keeping deliveries on time. This order consisted of six different types of supports such as variable assemblies, constant support assemblies, sway struts, and pre-insulated pipe supports along with associated “off the shelf” hardware items. We have served the piping industry for over 45 years providing a unique array of engineering and manufacturing experience to an ever-changing industry.

Read More
Top