	Piping Technology & Products	Loading
	Experienced Manufacturer of Pipe Supports since 1975	Call Us: (713) 731-0030 Toll-Free: (800) 787-5914 Se habla español

8 Foot Long Big Ton Variable Spring Assembly

Home

Slide Plates

Photo Title: 8 Foot Long Big Ton Variable Spring Assembly

Keywords:
slide plates, fluorogold, fluorogold slide plate, ptfe

Description:
This big ton spring assembly is designed for a local area refinery, and is fabricated from carbon steel components with a painted finish. The top of the load flange has three PTFE, 25 percent glass filled slide plates. The base is 96 inches x 18 inches and the installed height is 24 Inches. This big ton spring will be utilized to support heavy in excess of 76,000 lb. loads where a standard variable spring would be undersized. The big ton spring design includes an array of parallel coils within one frame to produce large load carrying capacity while maintaining the same spring rate. The assembly is designed to withstand an operating load of 76,800 lb. and has a downward travel of 0.894. Prior to fabrication, each of the coils were individually tested to insure correct spring rate and load capacity. After fabrication, the entire assembly was tested throughout the entire load and travel range.

View our catalog page for a PTFE, 25% Glass Filled Slide Plate

View our catalog page for Big Ton Springs

[Back]

Piping Technology & Products

Photo Title: 8 Foot Long Big Ton Variable Spring Assembly