High Temperature Supports (Hot Shoes) (HS-1000 – HS-6060)

A hot shoe is a pipe support used for high temperature applications, such as high pressure steam lines or boiler feed water, where heat loss through the pipe support is not desirable. These supports can be used for temperatures up to 1400˚ Fahrenheit.

Resting Hot Pipe Shoes (HS-1000 Series) - Types & Sizes

Anchor Hot Pipe Shoes (HS-2000 Series) - Types & Sizes

Sliding Hot Pipe Shoes (HS-3000 Series) - Types & Sizes

Guided Hot Pipe Shoes (HS-4000 Series) - Types & Sizes

Misc. Hot Pipe Shoes (HS-6000 Series) - Types & Sizes

Technical Information

Request A Quote



Ammonia Plant
Bioengergy Plant
Chemical Plant
Clean Fuels

Cogeneration Plant
Cold / Cryogenic Service
Commercial
Electric Plant

Energy Facility
Ethylene Plant
Fluid Processing Plant
Granular Activated Carbon Mnfr Plant

Hospital
Light Hydrocarbon Production Facility
LLDPE Chemical Plant
See More

See More Images

There are several types of insulation for pipe shoes. Below is what Polyurethane Foam Insulation would look like. Polyurethane Foam ...Continue Reading

The primary difference between insulated supports for cold temperatures and hot temperatures lies within the insulation materials themselves.Cold supports typically ...Continue Reading

Most high temperature supports (i.e. hot shoes) do not require any type of service or maintenance. If a shoe is ...Continue Reading


More FAQs…

General Dimensions & Specifications

Download Pre-Insulated Pipe Supports General Information

Scope
This specification covers the requirements for the design, fabrication and use of our pre-insulated low temperature pipe supports. These supports are for pipes having surface temperature ranges of –10oF (-23oC) to 1200oF (650oC).

General Requirements
All insulated pipes shall be supported with pre-insulated pipe supports.
Insulated pipe supports shall comply with the following standards:
A. ANSI/ASME B31.1 & B31.3
B. Manufacturers Standardization Society SP-58, 69, & 89.
 The following criteria shall be considered in the selection of low-temperature pre-insulated pipe supports:
A. Vertical, lateral and axial support design load limits.
B. Vertical, lateral, and axial support design travel limits.
C. The temperature of the cryogenic pipe support, at the pipe surface, and ambient conditions.
D. All test or pre-operational loads that may exceed normal operating conditions.
E. Any dimensional clearances needed during installation and operation should be specified.
F. Material for any items that will be welded directly to the pipe.
G. All loading and displacements caused by seismic, hydraulic surge, or other disturbances.
H. The temperature at the support steel.
 Upon request by the purchaser or the end user, design calculations of supports will be made available for review.
 Upon request by the purchaser or the end user, localized stress calculations for lugs and other welded attachments will be made available for review.
 Prior to placing an order, all special requirements such as mill test reports, material certification or non-standard materials must be specified.

Design Criteria
 The load bearing insulating materials used in the pre-insulated pipe support shall be the same material that was used to rate the support.
At the request of the end user or the purchaser, we will make available compressive strength and thermal conductivity testing results of the high-density polyurethane in the format provided by MSS SP-89. Testing will be done at the maximum temperature of 1200.
 A description of the quantity of load that can be applied to the support shall be provided for evaluation upon request. A minimum safety factor of 5 at the system design temperature shall be used to determine the maximum load.
 Testing for compressive strength properties shall comply with ASTM D1621, the standard testing method, for compressive properties of Rigid Cellular Plastics.
Testing for thermal conductivity shall comply with ASTM C165, Standard Test Method of Measuring Compressive Properties for Thermal Insulation.
 Load bearing element capacity shall be demonstrated at the system design temperature and load.
 The pre-insulated pipe support assembly shall exert enough clamping force to assure that the support will move axially with the pipe and will not slip when under design conditions.
 All slide plate surfaces shall be designed so that the coefficient of friction will be limited to .1 for the design life without requiring lubrication. Any friction reducing material that requires bonding shall be bonded to a backing structure prior to shipment.
The lower design temperature of the unit at the pipe surface shall be –10oF (-23oC). The maximum outside design temperature should be 200oF (93oC), the maximum pipe surface temperature should be 1200oF (650oC). For higher or lower temperatures, please contact us.
The required properties of the load bearing insulating materials under design conditions are:
A. The maximum thermal conductivity is 1.2 BTU-in/hr-ft2 – oF at a mean insulation temperature of 700oF.
B. There can be a maximum of 1/32″ of non-permanent deformation under the pipe due to the permanent consolidation of the load bearing insulation.
C. There can be an additional 1/32″ of non-permanent deformation under the pipe.
The outside surface temperature of the unit shall not exceed 120oF when ambient air is 70oC.

Fabrication
 All polyurethane foam shall be monolithic and molded oversized so that excess material shall be removed by cutting to achieve the final finished dimensions, the outer skin shall be removed.
 The pre-insulated pipe support shall:
A. Come pre-assembled with sufficient insulation extending past the outer metal jacket, allowing the pipe insulator to butt the line insulation against it.
B. Will withstand the clamping forces transferred by the cradle.
C. Will be treated to prevent moisture degradation in accordance with ASTM C656 Type I.
D. The ID and OD dimensions of the insulation shall conform to ASTM specification C585 unless otherwise specified.
 Designs having sliding surfaces shall incorporate two slide plates at each surface. Each slide plate will be made of 3/32″ thick glass filled reinforced PTFE, 25% glass filled, bonded to a 10GA carbon steel backing plate. The PTFE, 25% glass filled, will be recessed ¼” from the edge of the plate.
 All welding shall comply with B31.3 and B31.1 Piping Code and AWS D1.1
 The following items unless otherwise noted on contract drawings shall be in accordance with the following:
A. Structure shapes and plate: ASTM A-36
B. Bolts and studs: ASTM A-307
C. Nuts: A563

Choose this type of support if you have no anchor loads, guide loads or do not need to restrain the support, but only need to support the pipe without damaging the insulation.

Download PDF

HS-1000 Resting Hot Pipe Shoe (Without Base, 180° Insulation)

Hs 1000

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (HS-1000)-NPS-THK.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1″
1-1/2″
2″
2-1/2″
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
1/2”
70
139
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
3/4”
87
174
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1”
109
218
3-3/4”
4-3/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/4”
138
275
3-3/4”
5-1/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/2”
158
315
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8”
9-7/8″
11”
2”
197
394
5”
6-1/16”
7-1/4”
8-1/8”
9-1/8”
10-1/8″
11-1/4”
2-1/2”
238
477
5-1/2”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3”
290
580
6-1/16”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3-1/2”
332
663
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
4”
373
746
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
5”
461
922
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4”
13-1/4″
14-1/2”
6”
549
1098
9-15/16”
10-3/8”
11-1/2”
12-1/2”
13-1/2”
14-3/4″
15-3/4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
8”
2502
3575
11-1/2”
12-1/2”
13-1/2”
14-3/4”
15-3/4”
16-3/4″
17-3/4”
10”
3119
4456
13-1/2”
14-3/4”
15-3/4”
16-3/4”
17-3/4”
18-3/4″
19-3/4”
12”
3699
5285
13-15/16”
16-3/4”
17-3/4”
18-3/4”
19-3/4”
20-3/4″
21-3/4”
14”
4062
5803
17”
18”
19”
20”
21”
22″
23”
16”
7737
11053
19”
20”
21”
22”
23”
24″
25”
18”
8704
12434
21”
22”
23”
24”
25”
26″
27”
20”
9671
13816
23”
24”
25”
26”
27”
28″
29”
24”
11605
16579
27”
28”
29”
30”
31”
32″
33”
26”
12573
17961
29-1/2”
30-1/2”
31-1/2”
32-1/2”
33-1/2”
34-1/2″
35-1/2”
28”
13540
19342
31-1/2”
32-1/2”
33-1/2”
34-1/2”
35-1/2”
36-1/2″
37-1/2”
30”
14507
20724
33-1/2”
34-1/2”
35-1/2”
36-1/2”
37-1/2”
38-1/2″
39-1/2”
32”
15474
22106
35-1/2”
36-1/2”
37-1/2”
38-1/2”
39-1/2”
40-1/2″
41-1/2”
34”
16441
23487
37-1/2”
38-1/2”
39-1/2”
40-1/2”
41-1/2”
42-1/2″
43-1/2”
36”
17408
24869
39-1/2”
40-1/2”
41-1/2”
42-1/2”
43-1/2”
44-1/2″
45-1/2”
40”
19342
27632
43-1/2”
44-1/2”
45-1/2”
46-1/2”
47-1/2”
48-1/2″
49-1/2”
42”
20310
29014
45-1/2”
46-1/2”
47-1/2”
48-1/2”
49-1/2”
50-1/2″
51-1/2”

Download PDF

HS-1001 Resting Hot Pipe Shoe (Without Base, 360° Insulation)

Hs 1001

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1001)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
1/2”
70
139
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
3/4”
87
174
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1”
109
218
3-3/4”
4-3/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/4”
138
275
3-3/4”
5-1/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/2”
158
315
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8”
9-7/8″
11”
2”
197
394
5”
6-1/16”
7-1/4”
8-1/8”
9-1/8”
10-1/8″
11-1/4”
2-1/2”
238
477
5-1/2”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3”
290
580
6-1/16”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3-1/2”
332
663
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
4”
373
746
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
5”
461
922
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4”
13-1/4″
14-1/2”
6”
549
1098
9-15/16”
10-3/8”
11-1/2”
12-1/2”
13-1/2”
14-3/4″
15-3/4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
8”
715
1430
11-1/2”
12-1/2”
13-1/2”
14-3/4”
15-3/4”
16-3/4″
17-3/4”
10”
1782
2673
13-1/2”
14-3/4”
15-3/4”
16-3/4”
17-3/4”
18-3/4″
19-3/4”
12”
2114
3171
13-15/16”
16-3/4”
17-3/4”
18-3/4”
19-3/4”
20-3/4″
21-3/4”
14”
2321
3482
17”
18”
19”
20”
21”
22″
23”
16”
2653
3979
19”
20”
21”
22”
23”
24″
25”
18”
2984
4476
21”
22”
23”
24”
25”
26″
27”
20”
3316
4974
23”
24”
25”
26”
27”
28″
29”
24”
5969
7958
27”
28”
29”
30”
31”
32″
33”
26”
6466
8621
29-1/2”
30-1/2”
31-1/2”
32-1/2”
33-1/2”
34-1/2″
35-1/2”
28”
6963
9284
31-1/2”
32-1/2”
33-1/2”
34-1/2”
35-1/2”
36-1/2″
37-1/2”
30”
7461
9948
33-1/2”
34-1/2”
35-1/2”
36-1/2”
37-1/2”
38-1/2″
39-1/2”
32”
7958
10611
35-1/2”
36-1/2”
37-1/2”
38-1/2”
39-1/2”
40-1/2″
41-1/2”
34”
8455
11274
37-1/2”
38-1/2”
39-1/2”
40-1/2”
41-1/2”
42-1/2″
43-1/2”
36”
8953
11937
39-1/2”
40-1/2”
41-1/2”
42-1/2”
43-1/2”
44-1/2″
45-1/2”
40”
9948
13263
43-1/2”
44-1/2”
45-1/2”
46-1/2”
47-1/2”
48-1/2″
49-1/2”
42”
10445
13927
45-1/2”
46-1/2”
47-1/2”
48-1/2”
49-1/2”
50-1/2″
51-1/2”

Download PDF

HS-1010 Resting Hot Pipe Shoe (Split-T Base, 180° Insulation, with Bandstraps)

Hs 1010

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1010)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
69.63
139.27
3″
3-1/8”
4”
3″
4-1/4”
4”
3″
5-1/4”
4”
3/4”
87.04
174.08
3″
3-1/8”
4”
3″
4-1/4”
4”
3″
5-1/4”
4”
1”
109.01
218.02
3″
3-3/4”
4”
3″
4-3/4”
4”
3″
5-13/16”
4”
1-1/4”
137.61
275.21
3″
3-3/4”
4”
3″
5-1/4”
4”
3″
5-13/16”
4”
1-1/2”
157.50
315.00
3″
4-1/4”
4”
3″
5-1/4”
4”
3″
6-7/8”
4”
2”
196.88
393.76
4″
5”
4”
4″
6-1/16”
4”
4″
7-1/4”
4”
2-1/2”
238.33
476.65
4″
5-1/2”
4”
4″
7-1/8”
4”
4″
8-1/8”
4”
3”
290.14
580.27
4″
6-1/16”
4”
4″
7-1/8”
4”
4″
8-1/8”
4”
3-1/2”
331.58
663.17
4″
7-1/8”
4”
4″
8-1/8”
4”
4″
9-1/8”
4”
4”
373.03
746.06
4″
7-1/8”
4”
4″
8-1/8”
4”
4″
9-1/8”
4”
5”
461.11
922.22
4″
8-1/8”
4”
4″
9-1/8”
4”
4″
10-1/8”
4”
6”
549.19
1098.37
6″
9-15/16”
4”
6″
10-3/8”
4”
6″
11-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
69.63
139.27
3″
6-7/8”
4”
3″
7-7/8”
6”
3″
8-7/8″
6″
3″
9-7/8”
6”
3/4”
87.04
174.08
3″
6-7/8”
4”
3″
7-7/8”
6”
3″
8-7/8″
6″
3″
9-7/8”
6”
1”
109.01
218.02
3″
6-7/8”
4”
3″
7-7/8”
6”
3″
8-7/8″
6″
3″
9-7/8”
6”
1-1/4”
137.61
275.21
3″
6-7/8”
4”
3″
7-7/8”
6”
3″
8-7/8″
6″
3″
9-7/8”
6”
1-1/2”
157.50
315.00
3″
7-7/8”
4”
3″
8-7/8”
6”
3″
9-7/8″
6″
3″
11”
6”
2”
196.88
393.76
4″
8-1/8”
4”
4″
9-1/8”
6”
4″
10-1/8″
6″
4″
11-1/4”
6”
2-1/2”
238.33
476.65
4″
9-1/8”
4”
4″
10-1/8”
6”
4″
11-1/4″
6″
4″
12-1/4”
6”
3”
290.14
580.27
4″
9-1/8”
4”
4″
10-1/8”
6”
4″
11-1/4″
6″
4″
12-1/4”
6”
3-1/2”
331.58
663.17
4″
10-1/8”
4”
4″
11-1/4”
6”
4″
12-1/4″
6″
4″
13-1/4”
6”
4”
373.03
746.06
4″
10-1/8”
4”
4″
11-1/4”
6”
4″
12-1/4″
6″
4″
13-1/4”
6”
5”
461.11
922.22
4″
11-1/4”
4”
4″
12-1/4”
6”
4″
13-1/4″
6″
4″
14-1/2”
6”
6”
549.19
1098.37
6″
12-1/2”
4”
6″
13-1/2”
6”
6″
14-3/4″
6″
6″
15-3/4”
6”

Download PDF

HS-1011 Resting Hot Pipe Shoe (Split-T Base, 360° Insulation, with bolts)

Hs 1011

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1011)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
69 5/8
139 1/4
3″
3-1/8”
4”
3″
4-1/4”
4”
3″
5-1/4”
4”
3/4”
87
174
3″
3-1/8”
4”
3″
4-1/4”
4”
3″
5-1/4”
4”
1”
109
218
3″
3-3/4”
4”
3″
4-3/4”
4”
3″
5-13/16”
4”
1-1/4”
137 3/5
275 2/9
3″
3-3/4”
4”
3″
5-1/4”
4”
3″
5-13/16”
4”
1-1/2”
157 1/2
315
3″
4-1/4”
4”
3″
5-1/4”
4”
3″
6-7/8”
4”
2”
196 7/8
393 3/4
4″
5”
4”
4″
6-1/16”
4”
4″
7-1/4”
4”
2-1/2”
238 1/3
476 2/3
4″
5-1/2”
4”
4″
7-1/8”
4”
4″
8-1/8”
4”
3”
290 1/7
580 1/4
4″
6-1/16”
4”
4″
7-1/8”
4”
4″
8-1/8”
4”
3-1/2”
331 3/5
663 1/6
4″
7-1/8”
4”
4″
8-1/8”
4”
4″
9-1/8”
4”
4”
373
746
4″
7-1/8”
4”
4″
8-1/8”
4”
4″
9-1/8”
4”
5”
461 1/9
922 2/9
4″
8-1/8”
4”
4″
9-1/8”
4”
4″
10-1/8”
4”
6”
549 1/5
1098 3/8
6″
9-15/16”
4”
6″
10-3/8”
4”
6″
11-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
1”
109
218
3″
6-7/8”
4”
3″
7-7/8”
6”
3″
8-7/8″
6″
3″
9-7/8”
6”
1-1/4”
137 3/5
275 2/9
3″
6-7/8”
4”
3″
7-7/8”
6”
3″
8-7/8″
6″
3″
9-7/8”
6”
1-1/2”
157 1/2
315
3″
7-7/8”
4”
3″
8-7/8”
6”
3″
9-7/8″
6″
3″
11”
6”
2”
196 7/8
393 3/4
4″
8-1/8”
4”
4″
9-1/8”
6”
4″
10-1/8″
6″
4″
11-1/4”
6”
2-1/2”
238 1/3
476 2/3
4″
9-1/8”
4”
4″
10-1/8”
6”
4″
11-1/4″
6″
4″
12-1/4”
6”
3”
290 1/7
580 1/4
4″
9-1/8”
4”
4″
10-1/8”
6”
4″
11-1/4″
6″
4″
12-1/4”
6”
3-1/2”
331 3/5
663 1/6
4″
10-1/8”
4”
4″
11-1/4”
6”
4″
12-1/4″
6″
4″
13-1/4”
6”
4”
373
746
4″
10-1/8”
4”
4″
11-1/4”
6”
4″
12-1/4″
6″
4″
13-1/4”
6”
5”
461 1/9
922 2/9
4″
11-1/4”
4”
4″
12-1/4”
6”
4″
13-1/4″
6″
4″
14-1/2”
6”
6”
549 1/5
1098 3/8
6″
12-1/2”
4”
6″
13-1/2”
6”
6″
14-3/4″
6″
6″
15-3/4”
6”

Download PDF

HS-1020 Resting Hot Pipe Shoe (U-Type Base, 180° Insulation, with Bandstraps)

Hs 1020

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1020)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
10”
1782 1/4
2673 2/5
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
12”
2113 6/7
3170 7/9
8-1/2″
14-3/4″
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
14”
2321
3481 5/8
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
16”
2652 2/3
3979
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
4”
18”
2984 1/4
4476 3/8
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
4”
20”
3315 5/6
4973 3/4
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-1/8″
14-3/4”
4″
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782 1/4
2673 2/5
9-1/8″
16-3/4”
4″
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6”
10-5/8″
19-3/4”
6”
12”
2113 6/7
3170 7/9
10-1/8″
18-3/4”
4″
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6”
11-5/8″
21-3/4”
6”
14”
2321
3481 5/8
11″
20”
4″
11-1/2″
21”
6”
12″
22″
6”
12-1/2″
23”
6”
16”
2652 2/3
3979
12″
22”
6”
12-1/2″
23”
6”
13″
24″
6”
13-1/2″
25”
6”
18”
2984 1/4
4476 3/8
13″
24”
6”
13-1/2″
25”
6”
14″
26″
6”
14-1/2″
27”
6”
20”
3315 5/6
4973 3/4
14″
26”
6”
14-1/2″
27”
6”
15″
28″
6”
15-1/2″
29”
6”

Download PDF

HS-1021 Resting Hot Pipe Shoe (U-Type Base, 360° Insulation, with Bolts)

Hs 1021

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1021)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
10”
1782 1/4
2673 2/5
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
12”
2113 6/7
3170 7/9
8-1/2″
14-3/4″
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
14”
2321
3481 5/8
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
16”
2652 2/3
3979
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
4”
18”
2984 1/4
4476 3/8
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
4”
20”
3315 5/6
4973 3/4
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
4”

 

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-1/8″
14-3/4”
4″
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782 1/4
2673 2/5
9-1/8″
16-3/4”
4″
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6”
10-5/8″
19-3/4”
6”
12”
2113 6/7
3170 7/9
10-1/8″
18-3/4”
4″
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6”
11-5/8″
21-3/4”
6”
14”
2321
3481 5/8
11″
20”
4″
11-1/2″
21”
6”
12″
22″
6”
12-1/2″
23”
6”
16”
2652 2/3
3979
12″
22”
6”
12-1/2″
23”
6”
13″
24″
6”
13-1/2″
25”
6”
18”
2984 1/4
4476 3/8
13″
24”
6”
13-1/2″
25”
6”
14″
26″
6”
14-1/2″
27”
6”
20”
3315 5/6
4973 3/4
14″
26”
6”
14-1/2″
27”
6”
15″
28″
6”
15-1/2″
29”
6”

Download PDF

HS-1030 Resting Hot Pipe Shoe (Double-T Base, 180° Insulation, with Bandstraps)

Hs 1030

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1030)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
14-1/2″
27”
4”
15″
28”
4”
15-1/2″
29”
4″
26”
6466
8621
16-1/4″
29-1/2”
4”
16-3/4″
30-1/2”
4”
17-1/4″
31-1/2”
4″
28”
6963
9284
17-1/4″
31-1/2”
4”
17-3/4″
32-1/2”
4”
18-1/4″
33-1/2”
4″
30”
7461
9948
18-1/4″
33-1/2”
4”
18-3/4″
34-1/2”
4”
19-1/4″
35-1/2”
4″
32”
7958
10611
19-1/4″
35-1/2”
4”
19-3/4″
36-1/2”
4”
20-1/4″
37-1/2”
4″
34”
8455
11274
20-1/4″
37-1/2”
4”
20-3/4″
38-1/2”
4”
21-1/4″
39-1/2”
4″
36”
8953
11937
21-1/4″
39-1/2”
4”
21-3/4″
40-1/2”
4”
22-1/4″
41-1/2”
4″
40”
9948
13263
23-1/4″
43-1/2”
4”
23-3/4″
44-1/2”
4”
24-1/4″
45-1/2”
4″
42”
10445
13927
24-1/4″
45-1/2”
4”
24-3/4″
46-1/2”
4”
25-1/4″
47-1/2”
4″

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
16″
30”
6”
16-1/2″
31”
6”
17″
32″
6″
17-1/2″
33”
6″
26”
6466
8621
17-3/4″
32-1/2”
6”
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2″
6”
19-1/4″
35-1/2”
6″
28”
6963
9284
18-3/4″
34-1/2”
6”
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2″
6”
20-1/4″
37-1/2”
6″
30”
7461
9948
19-3/4″
36-1/2”
6”
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2″
6”
21-1/4″
39-1/2”
6″
32”
7958
10611
20-3/4″
38-1/2”
6”
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2″
6”
22-1/4″
41-1/2”
6″
34”
8455
11274
21-3/4″
40-1/2”
6”
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2″
6”
23-1/4″
43-1/2”
6″
36”
8953
11937
22-3/4″
42-1/2”
6”
23-1/4″
43-1/2”
6”
23-3/4″
44-1/2″
6”
24-1/4″
45-1/2”
6″
40”
9948
13263
24-3/4″
46-1/2”
6”
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2″
6”
26-1/4″
49-1/2”
6″
42”
10445
13927
25-3/4″
48-1/2”
6”
26-1/4″
49-1/2”
6”
26-3/4″
50-1/2″
6″
27-1/4″
51-1/2”
6″

Download PDF

HS-1031 Resting Hot Pipe Shoe (Double-T Base, 360° Insulation, with Bolts)

Hs 1031

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1031)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
14-1/2″
27”
4”
15″
28”
4”
15-1/2″
29”
4″
26”
6466
8621
16-1/4″
29-1/2”
4”
16-3/4″
30-1/2”
4”
17-1/4″
31-1/2”
4″
28”
6963
9284
17-1/4″
31-1/2”
4”
17-3/4″
32-1/2”
4”
18-1/4″
33-1/2”
4″
30”
7461
9948
18-1/4″
33-1/2”
4”
18-3/4″
34-1/2”
4”
19-1/4″
35-1/2”
4″
32”
7958
10611
19-1/4″
35-1/2”
4”
19-3/4″
36-1/2”
4”
20-1/4″
37-1/2”
4″
34”
8455
11274
20-1/4″
37-1/2”
4”
20-3/4″
38-1/2”
4”
21-1/4″
39-1/2”
4″
36”
8953
11937
21-1/4″
39-1/2”
4”
21-3/4″
40-1/2”
4”
22-1/4″
41-1/2”
4″
40”
9948
13263
23-1/4″
43-1/2”
4”
23-3/4″
44-1/2”
4”
24-1/4″
45-1/2”
4″
42”
10445
13927
24-1/4″
45-1/2”
4”
24-3/4″
46-1/2”
4”
25-1/4″
47-1/2”
4″

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
16″
30”
6”
16-1/2″
31”
6”
17″
32″
6″
17-1/2″
33”
6″
26”
6466
8621
17-3/4″
32-1/2”
6”
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2″
6”
19-1/4″
35-1/2”
6″
28”
6963
9284
18-3/4″
34-1/2”
6”
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2″
6”
20-1/4″
37-1/2”
6″
30”
7461
9948
19-3/4″
36-1/2”
6”
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2″
6”
21-1/4″
39-1/2”
6″
32”
7958
10611
20-3/4″
38-1/2”
6”
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2″
6”
22-1/4″
41-1/2”
6″
34”
8455
11274
21-3/4″
40-1/2”
6”
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2″
6”
23-1/4″
43-1/2”
6″
36”
8953
11937
22-3/4″
42-1/2”
6”
23-1/4″
43-1/2”
6”
23-3/4″
44-1/2″
6”
24-1/4″
45-1/2”
6″
40”
9948
13263
24-3/4″
46-1/2”
6”
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2″
6”
26-1/4″
49-1/2”
6″
42”
10445
13927
25-3/4″
48-1/2”
6”
26-1/4″
49-1/2”
6”
26-3/4″
50-1/2″
6″
27-1/4″
51-1/2”
6″

Choose this type of support if you need to restrain movement of your pipe in axial, lateral, or rotational forces.

Download PDF

HS-2010 Anchor Type Hot Pipe Shoe (Split-T Base, Welded)

Hs 2010

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2010)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
1/2”
418
627
3”
324
3-1/8”
4”
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
3/4”
522
783
3”
324
3-1/8”
4”
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
1”
654
981
4”
480
3-3/4”
4”
4”
795
4-3/4”
4”
4”
1215
5-13/16”
4”
4”
1723
6-7/8”
4”
1-1/4”
826
1238
4”
480
3-3/4”
4”
5”
981
5-1/4”
4”
4”
1215
5-13/16”
4”
4”
1723
6-7/8”
4”
1-1/2”
945
1418
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
4”
2282
7-7/8”
4”
2”
1181
1772
4”
794
5”
4”
4”
1215
6-1/16”
4”
4”
1723
7-1/4”
4”
4”
2282
8-1/8”
4”
2-1/2”
1430
2145
4”
981
5-1/2”
4”
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
3”
1741
2611
4”
1215
6-1/16”
4”
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
3-1/2”
1990
2984
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
4”
2238
3357
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
5”
2767
4150
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
4”
4536
11-1/4”
4”
6”
3295
4943
4”
2920
9-15/16”
4”
4”
3636
10-3/8”
4”
4”
4536
11-1/2”
4”
4”
5419
12-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
1/2”
418
627
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
3/4”
522
783
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1”
654
981
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1-1/4”
826
1238
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1-1/2”
945
1418
4”
2919
8-7/8”
6”
4”
3636
9-7/8″
6″
4”
4536
11”
6”
2”
1181
1772
4”
2919
9-1/8”
6”
4”
3636
10-1/8″
6″
4”
4536
11-1/4”
6”
2-1/2”
1430
2145
4”
3636
10-1/8”
6”
4”
4536
11-1/4″
6″
4”
5419
12-1/4”
6”
3”
1741
2611
4”
3640
10-1/8”
6”
4”
4536
11-1/4″
6″
4”
5419
12-1/4”
6”
3-1/2”
1990
2984
4”
4536
11-1/4”
6”
4”
5419
12-1/4″
6″
4”
6381
13-1/4”
6”
4”
2238
3357
4”
4536
11-1/4”
6”
4”
5419
12-1/4″
6″
4”
6381
13-1/4”
6”
5”
2767
4150
4”
5419
12-1/4”
6”
4”
6381
13-1/4″
6″
4”
7693
14-1/2”
6”
6”
3295
4943
4”
6381
13-1/2”
6”
4”
7693
14-3/4″
6″
4”
8831
15-3/4”
6”

Download PDF

HS-2011 Anchor Type Hot Pipe Shoe (Split-T Base, Stops and Guides)

Hs 2011

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2011)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
1/2”
418
627
3”
324
3-1/8”
4”
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
3/4”
522
783
3”
324
3-1/8”
4”
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
1”
654
981
4”
480
3-3/4”
4”
4”
795
4-3/4”
4”
4”
1215
5-13/16”
4”
4”
1723
6-7/8”
4”
1-1/4”
826
1238
4”
480
3-3/4”
4”
5”
981
5-1/4”
4”
4”
1215
5-13/16”
4”
4”
1723
6-7/8”
4”
1-1/2”
945
1418
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
4”
2282
7-7/8”
4”
2”
1181
1772
4”
794
5”
4”
4”
1215
6-1/16”
4”
4”
1723
7-1/4”
4”
4”
2282
8-1/8”
4”
2-1/2”
1430
2145
4”
981
5-1/2”
4”
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
3”
1741
2611
4”
1215
6-1/16”
4”
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
3-1/2”
1990
2984
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
4”
2238
3357
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
5”
2767
4150
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
4”
4536
11-1/4”
4”
6”
3295
4943
4”
2920
9-15/16”
4”
4”
3636
10-3/8”
4”
4”
4536
11-1/2”
4”
4”
5419
12-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
1/2”
418
627
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
3/4”
522
783
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1”
654
981
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1-1/4”
826
1238
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1-1/2”
945
1418
4”
2919
8-7/8”
6”
4”
3636
9-7/8″
6″
4”
4536
11”
6”
2”
1181
1772
4”
2919
9-1/8”
6”
4”
3636
10-1/8″
6″
4”
4536
11-1/4”
6”
2-1/2”
1430
2145
4”
3636
10-1/8”
6”
4”
4536
11-1/4″
6″
4”
5419
12-1/4”
6”
3”
1741
2611
4”
3640
10-1/8”
6”
4”
4536
11-1/4″
6″
4”
5419
12-1/4”
6”
3-1/2”
1990
2984
4”
4536
11-1/4”
6”
4”
5419
12-1/4″
6″
4”
6381
13-1/4”
6”
4”
2238
3357
4”
4536
11-1/4”
6”
4”
5419
12-1/4″
6″
4”
6381
13-1/4”
6”
5”
2767
4150
4”
5419
12-1/4”
6”
4”
6381
13-1/4″
6″
4”
7693
14-1/2”
6”
6”
3295
4943
4”
6381
13-1/2”
6”
4”
7693
14-3/4″
6″
4”
8831
15-3/4”
6”

Download PDF

HS-2012 Anchor Type Hot Pipe Shoe (Split-T Base, Bolted)

Hs 2012

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2012)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
1/2”
418
627
3”
324
3-1/8”
4”
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
3/4”
522
783
3”
324
3-1/8”
4”
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
1”
654
981
4”
480
3-3/4”
4”
4”
795
4-3/4”
4”
4”
1215
5-13/16”
4”
4”
1723
6-7/8”
4”
1-1/4”
826
1238
4”
480
3-3/4”
4”
5”
981
5-1/4”
4”
4”
1215
5-13/16”
4”
4”
1723
6-7/8”
4”
1-1/2”
945
1418
4”
628
4-1/4”
4”
4”
981
5-1/4”
4”
4”
1723
6-7/8”
4”
4”
2282
7-7/8”
4”
2”
1181
1772
4”
794
5”
4”
4”
1215
6-1/16”
4”
4”
1723
7-1/4”
4”
4”
2282
8-1/8”
4”
2-1/2”
1430
2145
4”
981
5-1/2”
4”
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
3”
1741
2611
4”
1215
6-1/16”
4”
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
3-1/2”
1990
2984
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
4”
2238
3357
4”
1723
7-1/8”
4”
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
5”
2767
4150
4”
2282
8-1/8”
4”
4”
2920
9-1/8”
4”
4”
3636
10-1/8”
4”
4”
4536
11-1/4”
4”
6”
3295
4943
4”
2920
9-15/16”
4”
4”
3636
10-3/8”
4”
4”
4536
11-1/2”
4”
4”
5419
12-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
1/2”
418
627
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
3/4”
522
783
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1”
654
981
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1-1/4”
826
1238
4”
2282
7-7/8”
6”
4”
2920
8-7/8″
6″
4”
3636
9-7/8”
6”
1-1/2”
945
1418
4”
2919
8-7/8”
6”
4”
3636
9-7/8″
6″
4”
4536
11”
6”
2”
1181
1772
4”
2919
9-1/8”
6”
4”
3636
10-1/8″
6″
4”
4536
11-1/4”
6”
2-1/2”
1430
2145
4”
3636
10-1/8”
6”
4”
4536
11-1/4″
6″
4”
5419
12-1/4”
6”
3”
1741
2611
4”
3640
10-1/8”
6”
4”
4536
11-1/4″
6″
4”
5419
12-1/4”
6”
3-1/2”
1990
2984
4”
4536
11-1/4”
6”
4”
5419
12-1/4″
6″
4”
6381
13-1/4”
6”
4”
2238
3357
4”
4536
11-1/4”
6”
4”
5419
12-1/4″
6″
4”
6381
13-1/4”
6”
5”
2767
4150
4”
5419
12-1/4”
6”
4”
6381
13-1/4″
6″
4”
7693
14-1/2”
6”
6”
3295
4943
4”
6381
13-1/2”
6”
4”
7693
14-3/4″
6″
4”
8831
15-3/4”
6”

Download PDF

HS-2020 Anchor Type Hot Pipe Shoe (U-Type Base, Welded)

Hs 2020

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2020)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
8”
4290
6435
6-1/2″
4536
11-1/2”
4”
7″
5419
12-1/2”
4”
7-1/2″
5890
13-1/2”
4”
8-1/8″
7693
14-3/4”
6”
10”
5347
8020
7-1/2″
6381
13-1/2”
4”
8-1/8″
7693
14-3/4”
4”
8-5/8″
8831
15-3/4”
4”
9-1/8″
10048
16-3/4”
6”
12”
6342
9512
8-1/2″
8831
13-15/16”
4”
9-1/8″
10048
16-3/4”
4”
9-5/8″
11343
17-3/4”
4”
10-1/8″
12717
18-3/4”
6”
14”
6963
10445
9-1/2″
10048
17”
4”
10″
11343
18”
4”
10-1/2″
12717
19”
4”
11″
14169
20”
6”
16”
7958
11937
10-1/2″
12717
19”
4”
11″
14169
20”
4”
11-1/2″
15700
21”
6”
12″
17309
22”
6”
18”
8953
13429
11-1/2″
15700
21”
4”
12″
17309
22”
4”
12-1/2″
18997
23”
6”
13″
20763
24”
6”
20”
9948
14921
12-1/2″
18997
23”
4”
13″
20763
24”
4”
13-1/2″
22608
25”
6”
14″
24531
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
8”
1668
3575
8-5/8″
8831
15-3/4”
6”
9-1/8″
10048
16-3/4″
6″
9-5/8″
11343
17-3/4”
6”
10”
3119
4456
9-5/8″
11343
17-3/4”
6”
10-1/8″
12717
18-3/4″
6″
10-5/8″
14169
19-3/4”
6”
12”
3699
5285
10-5/8″
14169
19-3/4”
6”
11-1/8″
15700
20-3/4″
6″
11-5/8″
17309
21-3/4”
6”
14”
4062
5803
11-1/2″
15700
21”
6”
12″
17309
22″
6″
12-1/2″
18997
23”
6”
16”
4642
11053
12-1/2″
18997
23”
6”
13″
20763
24″
6″
13-1/2″
22608
25”
8”
18”
8704
12434
13-1/2″
22608
25”
6”
14″
24531
26″
6″
14-1/2″
26533
27”
8”
20”
9671
13816
14-1/2″
26533
27”
6”
15″
28613
28″
6″
15-1/2″
30772
29”
8”

Download PDF

HS-2021 Anchor Type Hot Pipe Shoe (U-Type Base, Stops and Guides)

Hs 2021

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2021)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
8”
4290
6435
6-1/2″
4536
11-1/2”
4”
7″
5419
12-1/2”
4”
7-1/2″
5890
13-1/2”
4”
8-1/8″
7693
14-3/4”
6”
10”
5347
8020
7-1/2″
6381
13-1/2”
4”
8-1/8″
7693
14-3/4”
4”
8-5/8″
8831
15-3/4”
4”
9-1/8″
10048
16-3/4”
6”
12”
6342
9512
8-1/2″
8831
13-15/16”
4”
9-1/8″
10048
16-3/4”
4”
9-5/8″
11343
17-3/4”
4”
10-1/8″
12717
18-3/4”
6”
14”
6963
10445
9-1/2″
10048
17”
4”
10″
11343
18”
4”
10-1/2″
12717
19”
4”
11″
14169
20”
6”
16”
7958
11937
10-1/2″
12717
19”
4”
11″
14169
20”
4”
11-1/2″
15700
21”
6”
12″
17309
22”
6”
18”
8953
13429
11-1/2″
15700
21”
4”
12″
17309
22”
4”
12-1/2″
18997
23”
6”
13″
20763
24”
6”
20”
9948
14921
12-1/2″
18997
23”
4”
13″
20763
24”
4”
13-1/2″
22608
25”
6”
14″
24531
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
8”
1668
3575
8-5/8″
8831
15-3/4”
6”
9-1/8″
10048
16-3/4″
6″
9-5/8″
11343
17-3/4”
6”
10”
3119
4456
9-5/8″
11343
17-3/4”
6”
10-1/8″
12717
18-3/4″
6″
10-5/8″
14169
19-3/4”
6”
12”
3699
5285
10-5/8″
14169
19-3/4”
6”
11-1/8″
15700
20-3/4″
6″
11-5/8″
17309
21-3/4”
6”
14”
4062
5803
11-1/2″
15700
21”
6”
12″
17309
22″
6″
12-1/2″
18997
23”
6”
16”
4642
11053
12-1/2″
18997
23”
6”
13″
20763
24″
6″
13-1/2″
22608
25”
8”
18”
8704
12434
13-1/2″
22608
25”
6”
14″
24531
26″
6″
14-1/2″
26533
27”
8”
20”
9671
13816
14-1/2″
26533
27”
6”
15″
28613
28″
6″
15-1/2″
30772
29”
8”

Download PDF

HS-2023 Anchor Type Hot Pipe Shoe (U-Type Base, Structural Stops and Guides)

Hs 2023

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2023)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
8”
4290
6435
6-1/2″
4536
11-1/2”
4”
7″
5419
12-1/2”
4”
7-1/2″
5890
13-1/2”
4”
8-1/8″
7693
14-3/4”
6”
10”
5347
8020
7-1/2″
6381
13-1/2”
4”
8-1/8″
7693
14-3/4”
4”
8-5/8″
8831
15-3/4”
4”
9-1/8″
10048
16-3/4”
6”
12”
6342
9512
8-1/2″
8831
13-15/16”
4”
9-1/8″
10048
16-3/4”
4”
9-5/8″
11343
17-3/4”
4”
10-1/8″
12717
18-3/4”
6”
14”
6963
10445
9-1/2″
10048
17”
4”
10″
11343
18”
4”
10-1/2″
12717
19”
4”
11″
14169
20”
6”
16”
7958
11937
10-1/2″
12717
19”
4”
11″
14169
20”
4”
11-1/2″
15700
21”
6”
12″
17309
22”
6”
18”
8953
13429
11-1/2″
15700
21”
4”
12″
17309
22”
4”
12-1/2″
18997
23”
6”
13″
20763
24”
6”
20”
9948
14921
12-1/2″
18997
23”
4”
13″
20763
24”
4”
13-1/2″
22608
25”
6”
14″
24531
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
8”
1668
3575
8-5/8″
8831
15-3/4”
6”
9-1/8″
10048
16-3/4″
6″
9-5/8″
11343
17-3/4”
6”
10”
3119
4456
9-5/8″
11343
17-3/4”
6”
10-1/8″
12717
18-3/4″
6″
10-5/8″
14169
19-3/4”
6”
12”
3699
5285
10-5/8″
14169
19-3/4”
6”
11-1/8″
15700
20-3/4″
6″
11-5/8″
17309
21-3/4”
6”
14”
4062
5803
11-1/2″
15700
21”
6”
12″
17309
22″
6″
12-1/2″
18997
23”
6”
16”
4642
11053
12-1/2″
18997
23”
6”
13″
20763
24″
6″
13-1/2″
22608
25”
8”
18”
8704
12434
13-1/2″
22608
25”
6”
14″
24531
26″
6″
14-1/2″
26533
27”
8”
20”
9671
13816
14-1/2″
26533
27”
6”
15″
28613
28″
6″
15-1/2″
30772
29”
8”

Download PDF

HS-2030 Anchor Type Hot Pipe Shoe (Double-T Base, Welded)

Hs 2030

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2030)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
14-1/2″
26533
27”
4”
15″
28613
28”
4”
15-1/2″
30772
29”
6”
16″
33009
30”
6”
26”
12932
19398
16-1/4″
30772
29-1/2”
4”
16-3/4″
33009
30-1/2”
6”
17-1/4″
35325
31-1/2”
6”
17-3/4″
37719
32-1/2”
6”
28”
13927
20890
17-1/4″
35325
31-1/2”
4”
17-3/4″
37719
32-1/2”
6”
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2”
6”
30”
14921
22382
18-1/4″
40192
33-1/2”
4”
18-3/4″
42743
34-1/2”
6”
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2”
6”
32”
15916
23874
19-1/4″
45373
35-1/2”
4”
19-3/4″
48081
36-1/2”
6”
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2”
6”
34”
16911
25366
20-1/4″
50868
37-1/2”
4”
20-3/4″
53733
38-1/2”
6”
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2”
6”
36”
17906
26858
21-1/4″
56677
39-1/2”
4”
21-3/4″
59699
40-1/2”
6”
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2”
6”
40”
19895
29843
23-1/4″
69237
43-1/2”
4”
23-3/4″
72573
44-1/2”
6”
24-1/4″
75988
45-1/2”
6”
24-3/4″
79481
46-1/2”
6”
42”
20890
31335
24-1/4″
75988
45-1/2”
4”
24-3/4″
79481
46-1/2”
6”
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
16-1/2″
35325
31”
6”
17″
37719
32″
6″
17-1/2″
40192
33”
8”
26”
12932
19398
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2″
6″
19-1/4″
45373
35-1/2”
8”
28”
13927
20890
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2″
6″
20-1/4″
50868
37-1/2”
8”
30”
14921
22382
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2″
6″
21-1/4″
56677
39-1/2”
8”
32”
15916
23874
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2″
6″
22-1/4″
62800
41-1/2”
8”
34”
16911
25366
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2″
6″
23-1/4″
69237
43-1/2”
8”
36”
17906
26858
23-1/4″
69237
43-1/2”
6”
23-3/4″
72573
44-1/2″
6″
24-1/4″
75988
45-1/2”
8”
40”
19895
29843
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2″
6″
26-1/4″
90432
49-1/2”
8”
42”
20890
31335
26-1/4″
90432
49-1/2”
6”
26-3/4″
94239
50-1/2″
6″
27-1/4″
98125
51-1/2”
8”

Download PDF

HS-2031 Anchor Type Hot Pipe Shoe (Double-T Base, Stops and Guides)

Hs 2031

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2031)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
14-1/2″
26533
27”
4”
15″
28613
28”
4”
15-1/2″
30772
29”
6”
16″
33009
30”
6”
26”
12932
19398
16-1/4″
30772
29-1/2”
4”
16-3/4″
33009
30-1/2”
6”
17-1/4″
35325
31-1/2”
6”
17-3/4″
37719
32-1/2”
6”
28”
13927
20890
17-1/4″
35325
31-1/2”
4”
17-3/4″
37719
32-1/2”
6”
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2”
6”
30”
14921
22382
18-1/4″
40192
33-1/2”
4”
18-3/4″
42743
34-1/2”
6”
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2”
6”
32”
15916
23874
19-1/4″
45373
35-1/2”
4”
19-3/4″
48081
36-1/2”
6”
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2”
6”
34”
16911
25366
20-1/4″
50868
37-1/2”
4”
20-3/4″
53733
38-1/2”
6”
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2”
6”
36”
17906
26858
21-1/4″
56677
39-1/2”
4”
21-3/4″
59699
40-1/2”
6”
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2”
6”
40”
19895
29843
23-1/4″
69237
43-1/2”
4”
23-3/4″
72573
44-1/2”
6”
24-1/4″
75988
45-1/2”
6”
24-3/4″
79481
46-1/2”
6”
42”
20890
31335
24-1/4″
75988
45-1/2”
4”
24-3/4″
79481
46-1/2”
6”
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
16-1/2″
35325
31”
6”
17″
37719
32″
6″
17-1/2″
40192
33”
8”
26”
12932
19398
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2″
6″
19-1/4″
45373
35-1/2”
8”
28”
13927
20890
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2″
6″
20-1/4″
50868
37-1/2”
8”
30”
14921
22382
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2″
6″
21-1/4″
56677
39-1/2”
8”
32”
15916
23874
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2″
6″
22-1/4″
62800
41-1/2”
8”
34”
16911
25366
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2″
6″
23-1/4″
69237
43-1/2”
8”
36”
17906
26858
23-1/4″
69237
43-1/2”
6”
23-3/4″
72573
44-1/2″
6″
24-1/4″
75988
45-1/2”
8”
40”
19895
29843
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2″
6″
26-1/4″
90432
49-1/2”
8”
42”
20890
31335
26-1/4″
90432
49-1/2”
6”
26-3/4″
94239
50-1/2″
6″
27-1/4″
98125
51-1/2”
8”

Download PDF

HS-2032 Anchor Type Hot Pipe Shoe (Double-T Base, Bolted)

Hs 2032

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-1030)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
14-1/2″
26533
27”
4”
15″
28613
28”
4”
15-1/2″
30772
29”
6”
16″
33009
30”
6”
26”
12932
19398
16-1/4″
30772
29-1/2”
4”
16-3/4″
33009
30-1/2”
6”
17-1/4″
35325
31-1/2”
6”
17-3/4″
37719
32-1/2”
6”
28”
13927
20890
17-1/4″
35325
31-1/2”
4”
17-3/4″
37719
32-1/2”
6”
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2”
6”
30”
14921
22382
18-1/4″
40192
33-1/2”
4”
18-3/4″
42743
34-1/2”
6”
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2”
6”
32”
15916
23874
19-1/4″
45373
35-1/2”
4”
19-3/4″
48081
36-1/2”
6”
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2”
6”
34”
16911
25366
20-1/4″
50868
37-1/2”
4”
20-3/4″
53733
38-1/2”
6”
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2”
6”
36”
17906
26858
21-1/4″
56677
39-1/2”
4”
21-3/4″
59699
40-1/2”
6”
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2”
6”
40”
19895
29843
23-1/4″
69237
43-1/2”
4”
23-3/4″
72573
44-1/2”
6”
24-1/4″
75988
45-1/2”
6”
24-3/4″
79481
46-1/2”
6”
42”
20890
31335
24-1/4″
75988
45-1/2”
4”
24-3/4″
79481
46-1/2”
6”
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
16-1/2″
35325
31”
6”
17″
37719
32″
6″
17-1/2″
40192
33”
8”
26”
12932
19398
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2″
6″
19-1/4″
45373
35-1/2”
8”
28”
13927
20890
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2″
6″
20-1/4″
50868
37-1/2”
8”
30”
14921
22382
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2″
6″
21-1/4″
56677
39-1/2”
8”
32”
15916
23874
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2″
6″
22-1/4″
62800
41-1/2”
8”
34”
16911
25366
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2″
6″
23-1/4″
69237
43-1/2”
8”
36”
17906
26858
23-1/4″
69237
43-1/2”
6”
23-3/4″
72573
44-1/2″
6″
24-1/4″
75988
45-1/2”
8”
40”
19895
29843
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2″
6″
26-1/4″
90432
49-1/2”
8”
42”
20890
31335
26-1/4″
90432
49-1/2”
6”
26-3/4″
94239
50-1/2″
6″
27-1/4″
98125
51-1/2”
8”

Download PDF

HS-2033 Anchor Type Hot Pipe Shoe (Double-T Base, Stops and Structural Guides)

Hs 2033

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-2033)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
14-1/2″
26533
27”
4”
15″
28613
28”
4”
15-1/2″
30772
29”
6”
16″
33009
30”
6”
26”
12932
19398
16-1/4″
30772
29-1/2”
4”
16-3/4″
33009
30-1/2”
6”
17-1/4″
35325
31-1/2”
6”
17-3/4″
37719
32-1/2”
6”
28”
13927
20890
17-1/4″
35325
31-1/2”
4”
17-3/4″
37719
32-1/2”
6”
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2”
6”
30”
14921
22382
18-1/4″
40192
33-1/2”
4”
18-3/4″
42743
34-1/2”
6”
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2”
6”
32”
15916
23874
19-1/4″
45373
35-1/2”
4”
19-3/4″
48081
36-1/2”
6”
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2”
6”
34”
16911
25366
20-1/4″
50868
37-1/2”
4”
20-3/4″
53733
38-1/2”
6”
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2”
6”
36”
17906
26858
21-1/4″
56677
39-1/2”
4”
21-3/4″
59699
40-1/2”
6”
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2”
6”
40”
19895
29843
23-1/4″
69237
43-1/2”
4”
23-3/4″
72573
44-1/2”
6”
24-1/4″
75988
45-1/2”
6”
24-3/4″
79481
46-1/2”
6”
42”
20890
31335
24-1/4″
75988
45-1/2”
4”
24-3/4″
79481
46-1/2”
6”
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
W
Axial load (lbs.)
O.D.
H
24”
11937
17906
16-1/2″
35325
31”
6”
17″
37719
32″
6″
17-1/2″
40192
33”
8”
26”
12932
19398
18-1/4″
40192
33-1/2”
6”
18-3/4″
42743
34-1/2″
6″
19-1/4″
45373
35-1/2”
8”
28”
13927
20890
19-1/4″
45373
35-1/2”
6”
19-3/4″
48081
36-1/2″
6″
20-1/4″
50868
37-1/2”
8”
30”
14921
22382
20-1/4″
50868
37-1/2”
6”
20-3/4″
53733
38-1/2″
6″
21-1/4″
56677
39-1/2”
8”
32”
15916
23874
21-1/4″
56677
39-1/2”
6”
21-3/4″
59699
40-1/2″
6″
22-1/4″
62800
41-1/2”
8”
34”
16911
25366
22-1/4″
62800
41-1/2”
6”
22-3/4″
65979
42-1/2″
6″
23-1/4″
69237
43-1/2”
8”
36”
17906
26858
23-1/4″
69237
43-1/2”
6”
23-3/4″
72573
44-1/2″
6″
24-1/4″
75988
45-1/2”
8”
40”
19895
29843
25-1/4″
83053
47-1/2”
6”
25-3/4″
86703
48-1/2″
6″
26-1/4″
90432
49-1/2”
8”
42”
20890
31335
26-1/4″
90432
49-1/2”
6”
26-3/4″
94239
50-1/2″
6″
27-1/4″
98125
51-1/2”
8”

Choose this type of support if you have movement in your piping system.

Download PDF

HS-3011 Sliding Hot Pipe Shoe (Split-T Base, Guided, without Thrust Plates)

Hs 3011

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3011)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3”
3-1/8”
4”
4”
4-1/4”
4”
4”
5-1/4”
4”
4”
6-7/8”
4”
3/4”
87
174
3”
3-1/8”
4”
4”
4-1/4”
4”
4”
5-1/4”
4”
4”
6-7/8”
4”
1”
109
218
4”
3-3/4”
4”
4”
4-3/4”
4”
4”
5-13/16”
4”
4”
6-7/8”
4”
1-1/4”
138
275
4”
3-3/4”
4”
5”
5-1/4”
4”
4”
5-13/16”
4”
4”
6-7/8”
4”
1-1/2”
158
315
4”
4-1/4”
4”
4”
5-1/4”
4”
4”
6-7/8”
4”
4”
7-7/8”
4”
2”
197
394
4”
5”
4”
4”
6-1/16”
4”
4”
7-1/4”
4”
4”
8-1/8”
4”
2-1/2”
238
477
4”
5-1/2”
4”
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
3”
290
580
4”
6-1/16”
4”
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
3-1/2”
332
663
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
4”
10-1/8”
4”
4”
373
746
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
4”
10-1/8”
4”
5”
461
922
4”
8-1/8”
4”
4”
9-1/8”
4”
4”
10-1/8”
4”
4”
11-1/4”
4”
6”
549
1098
4”
9-15/16”
4”
4”
10-3/8”
4”
4”
11-1/2”
4”
4”
12-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
4”
7-7/8”
6”
4”
8-7/8″
6″
4”
9-7/8”
6”
3/4”
87
174
4”
7-7/8”
6”
4”
8-7/8″
6”
4”
9-7/8”
6”
1”
109
218
4”
7-7/8”
6”
4”
8-7/8″
6”
4”
9-7/8”
6”
1-1/4”
138
275
4”
7-7/8”
6”
4”
8-7/8″
6”
4”
9-7/8”
6”
1-1/2”
158
315
4”
8-7/8”
6”
4”
9-7/8″
6”
4”
11”
6”
2”
197
394
4”
9-1/8”
6”
4”
10-1/8″
6”
4”
11-1/4”
6”
2-1/2”
238
477
4”
10-1/8”
6”
4”
11-1/4″
6”
4”
12-1/4”
6”
3”
290
580
4”
10-1/8”
6”
4”
11-1/4″
6”
4”
12-1/4”
6”
3-1/2”
332
663
4”
11-1/4”
6”
4”
12-1/4″
6”
4”
13-1/4”
6”
4”
373
746
4”
11-1/4”
6”
4”
12-1/4″
6”
4”
13-1/4”
6”
5”
461
922
4”
12-1/4”
6”
4”
13-1/4″
6”
4”
14-1/2”
6”
6”
549
1098
4”
13-1/2”
6”
4”
14-3/4″
6”
4”
15-3/4”
6”

Download PDF

HS-3013 Sliding Hot Pipe Shoe (Split-T Base, Unguided, without Thrust Plates)

Hs 3013

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3013)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3”
3-1/8”
4”
4”
4-1/4”
4”
4”
5-1/4”
4”
4”
6-7/8”
4”
3/4”
87
174
3”
3-1/8”
4”
4”
4-1/4”
4”
4”
5-1/4”
4”
4”
6-7/8”
4”
1”
109
218
4”
3-3/4”
4”
4”
4-3/4”
4”
4”
5-13/16”
4”
4”
6-7/8”
4”
1-1/4”
138
275
4”
3-3/4”
4”
5”
5-1/4”
4”
4”
5-13/16”
4”
4”
6-7/8”
4”
1-1/2”
158
315
4”
4-1/4”
4”
4”
5-1/4”
4”
4”
6-7/8”
4”
4”
7-7/8”
4”
2”
197
394
4”
5”
4”
4”
6-1/16”
4”
4”
7-1/4”
4”
4”
8-1/8”
4”
2-1/2”
238
477
4”
5-1/2”
4”
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
3”
290
580
4”
6-1/16”
4”
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
3-1/2”
332
663
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
4”
10-1/8”
4”
4”
373
746
4”
7-1/8”
4”
4”
8-1/8”
4”
4”
9-1/8”
4”
4”
10-1/8”
4”
5”
461
922
4”
8-1/8”
4”
4”
9-1/8”
4”
4”
10-1/8”
4”
4”
11-1/4”
4”
6”
549
1098
4”
9-15/16”
4”
4”
10-3/8”
4”
4”
11-1/2”
4”
4”
12-1/2”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
4”
7-7/8”
6”
4”
8-7/8″
6″
4”
9-7/8”
6”
3/4”
87
174
4”
7-7/8”
6”
4”
8-7/8″
6″
4”
9-7/8”
6”
1”
109
218
4”
7-7/8”
6”
4”
8-7/8″
6″
4”
9-7/8”
6”
1-1/4”
138
275
4”
7-7/8”
6”
4”
8-7/8″
6″
4”
9-7/8”
6”
1-1/2”
158
315
4”
8-7/8”
6”
4”
9-7/8″
6″
4”
11”
6”
2”
197
394
4”
9-1/8”
6”
4”
10-1/8″
6″
4”
11-1/4”
6”
2-1/2”
238
477
4”
10-1/8”
6”
4”
11-1/4″
6″
4”
12-1/4”
6”
3”
290
580
4”
10-1/8”
6”
4”
11-1/4″
6″
4”
12-1/4”
6”
3-1/2”
332
663
4”
11-1/4”
6”
4”
12-1/4″
6″
4”
13-1/4”
6”
4”
373
746
4”
11-1/4”
6”
4”
12-1/4″
6″
4”
13-1/4”
6”
5”
461
922
4”
12-1/4”
6”
4”
13-1/4″
6″
4”
14-1/2”
6”
6”
549
1098
4”
13-1/2”
6”
4”
14-3/4″
6″
4”
15-3/4”
6”

Download PDF

HS-3020 Sliding Hot Pipe Shoe (U-Type Base, Guided, with Thrust Plates)

Hs 3020

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3020)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
6”
10”
1782
1782
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
9-1/8″
16-3/4”
6”
12”
2114
2114
8-1/2″
13-15/16”
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
10-1/8″
18-3/4”
6”
14”
2321
2321
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
11″
20”
6”
16”
2653
2653
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
6”
12″
22”
6”
18”
2984
2984
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
6”
13″
24”
6”
20”
3316
3316
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
6”
14″
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782
1782
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6″
10-5/8″
19-3/4”
6”
12”
2114
2114
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6″
11-5/8″
21-3/4”
6”
14”
2321
2321
11-1/2″
21”
6”
12″
22″
6″
12-1/2″
23”
6”
16”
2653
2653
12-1/2″
23”
6”
13″
24″
6″
13-1/2″
25”
8”
18”
2984
2984
13-1/2″
25”
6”
14″
26″
6″
14-1/2″
27”
8”
20”
3316
3316
14-1/2″
27”
6”
15″
28″
6″
15-1/2″
29”
8”

Download PDF

HS-3021 Sliding Hot Pipe Shoe (U-Type BASE, Guided, without thrust plates)

Hs 3021

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3021)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
6”
10”
1782
1782
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
9-1/8″
16-3/4”
6”
12”
2114
2114
8-1/2″
13-15/16”
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
10-1/8″
18-3/4”
6”
14”
2321
2321
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
11″
20”
6”
16”
2653
2653
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
6”
12″
22”
6”
18”
2984
2984
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
6”
13″
24”
6”
20”
3316
3316
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
6”
14″
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782
1782
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6″
10-5/8″
19-3/4”
6”
12”
2114
2114
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6″
11-5/8″
21-3/4”
6”
14”
2321
2321
11-1/2″
21”
6”
12″
22″
6″
12-1/2″
23”
6”
16”
2653
2653
12-1/2″
23”
6”
13″
24″
6″
13-1/2″
25”
8”
18”
2984
2984
13-1/2″
25”
6”
14″
26″
6″
14-1/2″
27”
8”
20”
3316
3316
14-1/2″
27”
6”
15″
28″
6″
15-1/2″
29”
8”

Download PDF

HS-3022 Sliding Hot Pipe Shoe (U-Type Base, Unguided, with Thrust Plates)

Hs 3022

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3022)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
6”
10”
1782
1782
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
9-1/8″
16-3/4”
6”
12”
2114
2114
8-1/2″
13-15/16”
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
10-1/8″
18-3/4”
6”
14”
2321
2321
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
11″
20”
6”
16”
2653
2653
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
6”
12″
22”
6”
18”
2984
2984
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
6”
13″
24”
6”
20”
3316
3316
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
6”
14″
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782
1782
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6″
10-5/8″
19-3/4”
6”
12”
2114
2114
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6″
11-5/8″
21-3/4”
6”
14”
2321
2321
11-1/2″
21”
6”
12″
22″
6″
12-1/2″
23”
6”
16”
2653
2653
12-1/2″
23”
6”
13″
24″
6″
13-1/2″
25”
8”
18”
2984
2984
13-1/2″
25”
6”
14″
26″
6″
14-1/2″
27”
8”
20”
3316
3316
14-1/2″
27”
6”
15″
28″
6″
15-1/2″
29”
8”

Download PDF

HS-3023 Sliding Hot Pipe Shoe (U-Type Base, Unguided, without Thrust Plates)

Hs 3023

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3023)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
6”
10”
1782
1782
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
9-1/8″
16-3/4”
6”
12”
2114
2114
8-1/2″
13-15/16”
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
10-1/8″
18-3/4”
6”
14”
2321
2321
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
11″
20”
6”
16”
2653
2653
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
6”
12″
22”
6”
18”
2984
2984
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
6”
13″
24”
6”
20”
3316
3316
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
6”
14″
26”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782
1782
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6″
10-5/8″
19-3/4”
6”
12”
2114
2114
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6″
11-5/8″
21-3/4”
6”
14”
2321
2321
11-1/2″
21”
6”
12″
22″
6″
12-1/2″
23”
6”
16”
2653
2653
12-1/2″
23”
6”
13″
24″
6″
13-1/2″
25”
8”
18”
2984
2984
13-1/2″
25”
6”
14″
26″
6″
14-1/2″
27”
8”
20”
3316
3316
14-1/2″
27”
6”
15″
28″
6″
15-1/2″
29”
8”

Download PDF

HS-3030 Sliding Hot Pipe Shoe (Double-T Base, Guided, with Thrust Plates)

Hs 3030

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3030)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
12”
27”
4”
12”
28”
4”
13”
29”
6”
13”
30”
6”
26”
6466
8621
14”
29-1/2”
4”
14”
30-1/2”
6”
15”
31-1/2”
6”
15-1/2”
32-1/2”
6”
28”
6963
9284
14-1/2”
31-1/2”
4”
15”
32-1/2”
6”
15-1/2”
33-1/2”
6”
16”
34-1/2”
6”
30”
7461
9948
16”
33-1/2”
4”
16-1/2”
34-1/2”
6”
18”
35-1/2”
6”
18”
36-1/2”
6”
32”
7958
10611
18”
35-1/2”
4”
18-1/2”
36-1/2”
6”
18-1/2”
37-1/2”
6”
19”
38-1/2”
6”
34”
8455
11274
18”
37-1/2”
4”
18-1/2”
38-1/2”
6”
19”
39-1/2”
6”
20”
40-1/2”
6”
36”
8953
11937
19”
39-1/2”
4”
19”
40-1/2”
6”
19-1/2”
41-1/2”
6”
19-1/2”
42-1/2”
6”
40”
9948
13263
18”
43-1/2”
4”
18”
44-1/2”
6”
19”
45-1/2”
6”
20”
46-1/2”
6”
42”
10445
13927
18”
45-1/2”
4”
19”
46-1/2”
6”
20”
47-1/2”
6”
21”
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
14”
31”
6”
16″
32″
6″
16”
33”
8”
26”
6466
8621
16”
33-1/2”
6”
16″
34-1/2″
6″
16”
35-1/2”
8”
28”
6963
9284
16”
35-1/2”
6”
17″
36-1/2″
6″
16-1/2”
37-1/2”
8”
30”
7461
9948
20”
37-1/2”
6”
20”
38-1/2″
6″
20”
39-1/2”
8”
32”
7958
10611
20”
39-1/2”
6”
21″
40-1/2″
6″
21”
41-1/2”
8”
34”
8455
11274
21-1/2”
41-1/2”
6”
22″
42-1/2″
6″
21-1/2”
43-1/2”
8”
36”
8953
11937
20”
43-1/2”
6”
21″
44-1/2″
6″
21”
45-1/2”
8”
40”
9948
13263
21”
47-1/2”
6”
22″
48-1/2″
6″
22”
49-1/2”
8”
42”
10445
13927
22”
49-1/2”
6”
23″
50-1/2″
6″
23”
51-1/2”
8”

Download PDF

HS-3031 Sliding Hot Pipe Shoe (Double-T Base, Guided, without Thrust Plates)

Hs 3031

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3031)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
11605
16579
14-1/2″
27”
4”
15″
28”
4”
15-1/2″
29”
6”
16″
30”
6”
26”
12573
17961
16-1/4″
29-1/2”
4”
16-3/4″
30-1/2”
6”
17-1/4″
31-1/2”
6”
17-3/4″
32-1/2”
6”
28”
13540
19342
17-1/4″
31-1/2”
4”
17-3/4″
32-1/2”
6”
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2”
6”
30”
14507
20724
18-1/4″
33-1/2”
4”
18-3/4″
34-1/2”
6”
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2”
6”
32”
15474
22106
19-1/4″
35-1/2”
4”
19-3/4″
36-1/2”
6”
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2”
6”
34”
16441
23487
20-1/4″
37-1/2”
4”
20-3/4″
38-1/2”
6”
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2”
6”
36”
17408
24869
21-1/4″
39-1/2”
4”
21-3/4″
40-1/2”
6”
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2”
6”
40”
19342
27632
23-1/4″
43-1/2”
4”
23-3/4″
44-1/2”
6”
24-1/4″
45-1/2”
6”
24-3/4″
46-1/2”
6”
42”
20310
29014
24-1/4″
45-1/2”
4”
24-3/4″
46-1/2”
6”
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
11605
16579
16-1/2″
31”
6”
17″
32″
6″
17-1/2″
33”
8”
26”
12573
17961
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2″
6″
19-1/4″
35-1/2”
8”
28”
13540
19342
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2″
6″
20-1/4″
37-1/2”
8”
30”
14507
20724
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2″
6″
21-1/4″
39-1/2”
8”
32”
15474
22106
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2″
6″
22-1/4″
41-1/2”
8”
34”
16441
23487
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2″
6″
23-1/4″
43-1/2”
8”
36”
17408
24869
23-1/4″
43-1/2”
6”
23-3/4″
44-1/2″
6″
24-1/4″
45-1/2”
8”
40”
19342
27632
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2″
6″
26-1/4″
49-1/2”
8”
42”
20310
29014
26-1/4″
49-1/2”
6”
26-3/4″
50-1/2″
6″
27-1/4″
51-1/2”
8”

Download PDF

HS-3032 Sliding Hot Pipe Shoe (Double-T Base, Unguided, with Thrust Plates)

Hs 3032

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3032)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
11605
16579
14-1/2″
27”
4”
15″
28”
4”
15-1/2″
29”
6”
16″
30”
6”
26”
12573
17961
16-1/4″
29-1/2”
4”
16-3/4″
30-1/2”
6”
17-1/4″
31-1/2”
6”
17-3/4″
32-1/2”
6”
28”
13540
19342
17-1/4″
31-1/2”
4”
17-3/4″
32-1/2”
6”
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2”
6”
30”
14507
20724
18-1/4″
33-1/2”
4”
18-3/4″
34-1/2”
6”
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2”
6”
32”
15474
22106
19-1/4″
35-1/2”
4”
19-3/4″
36-1/2”
6”
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2”
6”
34”
16441
23487
20-1/4″
37-1/2”
4”
20-3/4″
38-1/2”
6”
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2”
6”
36”
17408
24869
21-1/4″
39-1/2”
4”
21-3/4″
40-1/2”
6”
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2”
6”
40”
19342
27632
23-1/4″
43-1/2”
4”
23-3/4″
44-1/2”
6”
24-1/4″
45-1/2”
6”
24-3/4″
46-1/2”
6”
42”
20310
29014
24- 1/4″
45-1/2”
4”
24-3/4″
46-1/2”
6”
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
11605
16579
16-1/2″
31”
6”
17″
32″
6″
17-1/2″
33”
8”
26”
12573
17961
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2″
6″
19-1/4″
35-1/2”
8”
28”
13540
19342
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2″
6″
20-1/4″
37-1/2”
8”
30”
14507
20724
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2″
6″
21-1/4″
39-1/2”
8”
32”
15474
22106
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2″
6″
22-1/4″
41-1/2”
8”
34”
16441
23487
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2″
6″
23-1/4″
43-1/2”
8”
36”
17408
24869
23-1/4″
43-1/2”
6”
23-3/4″
44-1/2″
6″
24-1/4″
45-1/2”
8”
40”
19342
27632
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2″
6″
26-1/4″
49-1/2”
8”
42”
20310
29014
26-1/4″
49-1/2”
6”
26-3/4″
50-1/2″
6″
27-1/4″
51-1/2”
8”

Download PDF

HS-3033 Sliding Hot Pipe Shoe (Double-T Base, Unguided, without Thrust Plates)

Hs 3033

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-3033)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2″
2”
2-1/2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
11605
16579
14 1/2″
27”
4”
15″
28”
4”
15 1/2″
29”
6”
16′
30”
6”
26”
12573
17961
16 1/4″
29-1/2”
4”
16 3/4″
30-1/2”
6”
17 1/4″
31-1/2”
6”
17 3/4″
32-1/2”
6”
28”
13540
19342
17 1/4″
31-1/2”
4”
17 3/4″
32-1/2”
6”
18 1/4″
33-1/2”
6”
18 3/4″
34-1/2”
6”
30”
14507
20724
18 1/4″
33-1/2”
4”
18 3/4″
34-1/2”
6”
19 1/4″
35-1/2”
6”
19 3/4″
36-1/2”
6”
32”
15474
22106
19 1/4″
35-1/2”
4”
19 3/4″
36-1/2”
6”
20 1/4″
37-1/2”
6”
20 3/4″
38-1/2”
6”
34”
16441
23487
20 1/4″
37-1/2”
4”
20 3/4″
38-1/2”
6”
21 1/4″
39-1/2”
6”
21 3/4″
40-1/2”
6”
36”
17408
24869
21 1/4″
39-1/2”
4”
21 3/4″
40-1/2”
6”
22 1/4″
41-1/2”
6”
22 3/4″
42-1/2”
6”
40”
19342
27632
23 1/4″
43-1/2”
4”
23 3/4″
44-1/2”
6”
24 1/4″
45-1/2”
6”
24 3/4″
46-1/2”
6”
42”
20310
29014
24 1/4″
45-1/2”
4”
24 3/4″
46-1/2”
6”
25 1/4″
47-1/2”
6”
25 3/4″
48-1/2”
6”

 

Pipe
L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
11605
16579
16 1/2″
31”
6”
17″
32″
6″
17 1/2″
33”
8”
26”
12573
17961
18 1/4″
33-1/2”
6”
18 3/4″
34-1/2″
6″
19 1/4″
35-1/2”
8”
28”
13540
19342
19 1/4″
35-1/2”
6”
19 3/4″
36-1/2″
6″
20 1/4″
37-1/2”
8”
30”
14507
20724
20 1/4″
37-1/2”
6”
20 3/4″
38-1/2″
6″
21 1/4″
39-1/2”
8”
32”
15474
22106
21 1/4″
39-1/2”
6”
21 3/4″
40-1/2″
6″
22 1/4″
41-1/2”
8”
34”
16441
23487
22 1/4″
41-1/2”
6”
22 3/4″
42-1/2″
6″
23 1/4″
43-1/2”
8”
36”
17408
24869
23 1/4″
43-1/2”
6”
23 3/4″
44-1/2″
6″
24 1/4″
45-1/2”
8”
40”
19342
27632
25 1/4″
47-1/2”
6”
25 3/4″
48-1/2″
6″
26 1/4″
49-1/2”
8”
42”
20310
29014
26 1/4″
49-1/2”
6”
26 3/4″
50-1/2″
6″
27 1/4″
51-1/2”
8”

Choose this type of support if you are trying to control movement in your piping system to prevent damage to your process equipment.

Download PDF

HS-4001 Guided Hot Pipe Shoe (Without Base)

Hs 4001

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4001)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
O.D.
H
O.D.
H
O.D.
H
O.D.
H
O.D.
H
O.D.
H
O.D.
H
1/2”
70
139
2″
4”
4-1/4”
4”
5-1/4”
4”
6-7/8”
4”
7-7/8”
6”
8-7/8″
6″
9-7/8”
6”
3/4”
87
174
2″
4”
4-1/4”
4”
5-1/4”
4”
6-7/8”
4”
7-7/8”
6”
8-7/8″
6″
9-7/8”
6”
1”
109
218
2-1/2″
4”
4-3/4”
4”
5-13/16”
4”
6-7/8”
4”
7-7/8”
6”
8-7/8″
6″
9-7/8”
6”
1-1/4”
138
275
2-1/2″
4”
5-1/4”
4”
5-13/16”
4”
6-7/8”
4”
7-7/8”
6”
8-7/8″
6″
9-7/8”
6”
1-1/2”
158
315
2-13/16″
4”
5-1/4”
4”
6-7/8”
4”
7-7/8”
4”
8-7/8”
6”
9-7/8″
6″
11”
6”
2”
197
394
3-3/16″
4”
6-1/16”
4”
7-1/4”
4”
8-1/8”
4”
9-1/8”
6”
10-1/8″
6″
11-1/4”
6”
2-1/2”
238
477
3-1/2″
4”
7-1/8”
4”
8-1/8”
4”
9-1/8”
4”
10-1/8”
6”
11-1/4″
6″
12-1/4”
6”
3”
290
580
3-15/16″
4”
7-1/8”
4”
8-1/8”
4”
9-1/8”
4”
10-1/8”
6”
11-1/4″
6″
12-1/4”
6”
3-1/2”
332
663
4-11/16″
4”
8-1/8”
4”
9-1/8”
4”
10-1/8”
4”
11-1/4”
6”
12-1/4″
6″
13-1/4”
6”
4”
373
746
4-11/16″
4”
8-1/8”
4”
9-1/8”
4”
10-1/8”
4”
11-1/4”
6”
12-1/4″
6″
13-1/4”
6”
5”
461
922
5-3/8″
4”
9-1/8”
4”
10-1/8”
4”
11-1/4”
4”
12-1/4”
6”
13-1/4″
6″
14-1/2”
6”
6”
549
1098
6-1/8″
4”
10-3/8”
4”
11-1/2”
4”
12-1/2”
4”
13-1/2”
6”
14-3/4″
6″
15-3/4”
6”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
O.D.
H
O.D.
H
O.D.
H
O.D.
H
O.D.
H
O.D.
H
O.D.
H
8”
715
1430
11-1/2”
4”
12-1/2”
4”
13-1/2”
4”
14-3/4”
4″
15-3/4”
6”
16-3/4″
6″
17-3/4”
6”
10”
1782
2673
13-1/2”
4”
14-3/4”
4”
15-3/4”
4”
16-3/4”
4″
17-3/4”
6”
18-3/4″
6″
19-3/4”
6”
12”
2114
3171
13-15/16”
4”
16-3/4”
4”
17-3/4”
4”
18-3/4”
4″
19-3/4”
6”
20-3/4″
6″
21-3/4”
6”
14”
2321
3482
17”
4”
18”
4”
19”
4”
20”
4″
21”
6”
22″
6″
23”
6”
16”
2653
3979
19”
4”
20”
4”
21”
4”
22”
6”
23”
6”
24″
6″
25”
6”
18”
2984
4476
21”
4”
22”
4”
23”
4”
24”
6”
25”
6”
26″
6″
27”
6”
20”
3316
4974
23”
4”
24”
4”
25”
4”
26”
6”
27”
6”
28″
6″
29”
6”
24”
5969
7958
27”
4”
28”
4”
29”
4″
30”
6”
31”
6”
32″
6″
33”
6″
26”
6466
8621
29-1/2”
4”
30-1/2”
4”
31-1/2”
4″
32-1/2”
6”
33-1/2”
6”
34-1/2″
6″
35-1/2”
6″
28”
6963
9284
31-1/2”
4”
32-1/2”
4”
33-1/2”
4″
34-1/2”
6”
35-1/2”
6”
36-1/2″
6″
37-1/2”
6″
30”
7461
9948
33-1/2”
4”
34-1/2”
4”
35-1/2”
4″
36-1/2”
6”
37-1/2”
6”
38-1/2″
6″
39-1/2”
6″
32”
7958
10611
35-1/2”
4”
36-1/2”
4”
37-1/2”
4″
38-1/2”
6”
39-1/2”
6”
40-1/2″
6″
41-1/2”
6″
34”
8455
11274
37-1/2”
4”
38-1/2”
4”
39-1/2”
4″
40-1/2”
6”
41-1/2”
6”
42-1/2″
6″
43-1/2”
6″
36”
8953
11937
39-1/2”
4”
40-1/2”
4”
41-1/2”
4″
42-1/2”
6”
43-1/2”
6”
44-1/2″
6″
45-1/2”
6″
40”
9948
13263
43-1/2”
4”
44-1/2”
4”
45-1/2”
4″
46-1/2”
6”
47-1/2”
6”
48-1/2″
6″
49-1/2”
6″
42”
10445
13927
45-1/2”
4”
46-1/2”
4”
47-1/2”
4″
48-1/2”
6”
49-1/2”
6”
50-1/2″
6″
51-1/2”
6″

Download PDF

HS-4010 Guided Hot Pipe Shoe (Split-T Base, 180° Insulation, with Bandstraps)

Hs 4010

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4010)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3″
3-1/8″
4”
3″
4-1/4″
4”
3″
5-1/4″
4”
3/4”
87
174
3″
3-1/8″
4”
3″
4-1/4″
4”
3″
5-1/4″
4”
1”
109
218
3″
3-3/4″
4”
3″
4-3/4″
4”
3″
5-13/16″
4”
1-1/4”
138
275
3″
3-3/4″
4”
3″
5-1/4″
4”
3″
5-13/16″
4”
1-1/2”
158
315
3″
4-1/4″
4”
3″
5-1/4″
4”
3″
6-7/8″
4”
2”
197
394
4″
5″
4”
4″
6-1/16″
4”
4″
7-1/4″
4”
2-1/2”
238
477
4″
5-1/2″
4”
4″
7-1/8″
4”
4″
8-1/8″
4”
3”
290
580
4″
6-1/16″
4”
4″
7-1/8″
4”
4″
8-1/8″
4”
3-1/2”
332
663
4″
7-1/8″
4”
4″
8-1/8″
4”
4″
9-1/8″
4”
4”
373
746
4″
7-1/8″
4”
4″
8-1/8″
4”
4″
9-1/8″
4”
5”
461
922
4″
8-1/8″
4”
4″
9-1/8″
4”
4″
10-1/8″
4”
6”
549
1098
6″
9-15/16″
4”
6″
10-3/8″
4”
6″
11-1/2″
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
3/4”
87
174
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
1”
109
218
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
1-1/4”
138
275
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
1-1/2”
158
315
3″
7-7/8″
4”
3″
8-7/8″
6”
3″
9-7/8″
6″
3″
11″
6”
2”
197
394
4″
8-1/8″
4”
4″
9-1/8″
6”
4″
10-1/8″
6″
4″
11-1/4″
6”
2-1/2”
238
477
4″
9-1/8″
4”
4″
10-1/8″
6”
4″
11-1/4″
6″
4″
12-1/4″
6”
3”
290
580
4″
9-1/8″
4”
4″
10-1/8″
6”
4″
11-1/4″
6″
4″
12-1/4″
6”
3-1/2”
332
663
4″
10-1/8″
4”
4″
11-1/4″
6”
4″
12-1/4″
6″
4″
13-1/4″
6”
4”
373
746
4″
10-1/8″
4”
4″
11-1/4″
6”
4″
12-1/4″
6″
4″
13-1/4″
6”
5”
461
922
4″
11-1/4″
4”
4″
12-1/4″
6”
4″
13-1/4″
6″
4″
14-1/2″
6”
6”
549
1098
6″
12-1/2″
4”
6″
13-1/2″
6”
6″
14-3/4″
6″
6″
15-3/4″
6”

Download PDF

HS-4011 Guided Hot Pipe Shoe (Split-T Base, 360° Insulation, with Bolts)

Hs 4011

PIPE SIZE: 1/2″ to 6″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4011)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3″
3-1/8″
4”
3″
4-1/4″
4”
3″
5-1/4″
4”
3/4”
87
174
3″
3-1/8″
4”
3″
4-1/4″
4”
3″
5-1/4″
4”
1”
109
218
3″
3-3/4″
4”
3″
4-3/4″
4”
3″
5-13/16″
4”
1-1/4”
138
275
3″
3-3/4″
4”
3″
5-1/4″
4”
3″
5-13/16″
4”
1-1/2”
158
315
3″
4-1/4″
4”
3″
5-1/4″
4”
3″
6-7/8″
4”
2”
197
394
4″
5″
4”
4″
6-1/16″
4”
4″
7-1/4″
4”
2-1/2”
238
477
4″
5-1/2″
4”
4″
7-1/8″
4”
4″
8-1/8″
4”
3”
290
580
4″
6-1/16″
4”
4″
7-1/8″
4”
4″
8-1/8″
4”
3-1/2”
332
663
4″
7-1/8″
4”
4″
8-1/8″
4”
4″
9-1/8″
4”
4”
373
746
4″
7-1/8″
4”
4″
8-1/8″
4”
4″
9-1/8″
4”
5”
461
922
4″
8-1/8″
4”
4″
9-1/8″
4”
4″
10-1/8″
4”
6”
549
1098
6″
9-15/16″
4”
6″
10-3/8″
4”
6″
11-1/2″
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
3/4”
87
174
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
1”
109
218
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
1-1/4”
138
275
3″
6-7/8″
4”
3″
7-7/8″
6”
3″
8-7/8″
6″
3″
9-7/8″
6”
1-1/2”
158
315
3″
7-7/8″
4”
3″
8-7/8″
6”
3″
9-7/8″
6″
3″
11″
6”
2”
197
394
4″
8-1/8″
4”
4″
9-1/8″
6”
4″
10-1/8″
6″
4″
11-1/4″
6”
2-1/2”
238
477
4″
9-1/8″
4”
4″
10-1/8″
6”
4″
11-1/4″
6″
4″
12-1/4″
6”
3”
290
580
4″
9-1/8″
4”
4″
10-1/8″
6”
4″
11-1/4″
6″
4″
12-1/4″
6”
3-1/2”
332
663
4″
10-1/8″
4”
4″
11-1/4″
6”
4″
12-1/4″
6″
4″
13-1/4″
6”
4”
373
746
4″
10-1/8″
4”
4″
11-1/4″
6”
4″
12-1/4″
6″
4″
13-1/4″
6”
5”
461
922
4″
11-1/4″
4”
4″
12-1/4″
6”
4″
13-1/4″
6″
4″
14-1/2″
6”
6”
549
1098
6″
12-1/2″
4”
6″
13-1/2″
6”
6″
14-3/4″
6″
6″
15-3/4″
6”

Download PDF

HS-4020 Guided Hot Pipe Shoe (U-Type Base, 180° Insulation, with Bandstraps)

Hs 4020

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4020)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
7-5/8″
11-1/2”
4”
8-5/16″
12-1/2”
4”
8-11/16″
13-1/2”
4”
10”
1782
2673
9″
13-1/2”
4”
9-15/16″
14-3/4”
4”
10-5/8″
15-3/4”
4”
12”
2114
3171
10-5/8″
13-15/16”
4”
11-5/16″
16-3/4”
4”
12″
17-3/4”
4”
14”
2321
3482
11-5/16″
17”
4”
12″
18”
4”
12-3/4″
19”
4”
16”
2653
3979
12-3/4″
19”
4”
13-7/16″
20”
4”
14-1/8″
21”
4”
18”
2984
4476
14-1/8″
21”
4”
14-13/16″
22”
4”
15-5/8″
23”
4”
20”
3316
4974
15-5/8″
23”
4”
16-5/16″
24”
4”
17″
25”
4”

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
9-15/16″
14-3/4”
4″
10-5/8″
15-3/4”
6”
11-5/16″
16-3/4″
6″
12″
17-3/4”
6”
10”
1782
2673
11-5/16″
16-3/4”
4″
12″
17-3/4”
6”
12-3/4″
18-3/4″
6″
13-7/16″
19-3/4”
6”
12”
2114
3171
12-11/16″
18-3/4”
4″
13-7/16″
19-3/4”
6”
14-1/8″
20-3/4″
6″
14-13/16″
21-3/4”
6”
14”
2321
3482
13-7/16″
20”
4″
14-1/8″
21”
6”
14-13/16″
22″
6″
15-5/8″
23”
6”
16”
2653
3979
14-13/16″
22”
6”
15-5/8″
23”
6”
16-1/4″
24″
6″
17″
25”
6”
18”
2984
4476
16-5/16″
24”
6”
17″
25”
6”
17-11/16″
26″
6″
18-7/16″
27”
6”
20”
3316
4974
17-3/4″
26”
6”
18-7/16″
27”
6”
19-1/8″
28″
6″
19-13/16″
29”
6”

Download PDF

HS-4021 Guided Hot Pipe Shoe (U-Type Base, 360° Insulation, with Bandstraps)

Hs 4021

PIPE SIZE: 8″ to 20″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4021)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
6-1/2″
11-1/2”
4”
7″
12-1/2”
4”
7-1/2″
13-1/2”
4”
10”
1782
2673
7-1/2″
13-1/2”
4”
8-1/8″
14-3/4”
4”
8-5/8″
15-3/4”
4”
12”
2114
3171
8-1/2″
13-15/16”
4”
9-1/8″
16-3/4”
4”
9-5/8″
17-3/4”
4”
14”
2321
3482
9-1/2″
17”
4”
10″
18”
4”
10-1/2″
19”
4”
16”
2653
3979
10-1/2″
19”
4”
11″
20”
4”
11-1/2″
21”
4″
18”
2984
4476
11-1/2″
21”
4”
12″
22”
4”
12-1/2″
23”
4″
20”
3316
4974
12-1/2″
23”
4”
13″
24”
4”
13-1/2″
25”
4″

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
8”
715
1430
8-1/8″
14-3/4”
4″
8-5/8″
15-3/4”
6”
9-1/8″
16-3/4″
6″
9-5/8″
17-3/4”
6”
10”
1782
2673
9-1/8″
16-3/4”
4″
9-5/8″
17-3/4”
6”
10-1/8″
18-3/4″
6″
10-5/8″
19-3/4”
6”
12”
2114
3171
10-1/8″
18-3/4”
4″
10-5/8″
19-3/4”
6”
11-1/8″
20-3/4″
6″
11-5/8″
21-3/4”
6”
14”
2321
3482
11″
20”
4″
11-1/2″
21”
6”
12″
22″
6″
12-1/2″
23”
6”
16”
2653
3979
12″
22”
6”
12-1/2″
23”
6”
13″
24″
6″
13-1/2″
25”
6”
18”
2984
4476
13″
24”
6”
13-1/2″
25”
6”
14″
26″
6″
14-1/2″
27”
6”
20”
3316
4974
14″
26”
6”
14-1/2″
27”
6”
15″
28″
6″
15-1/2″
29”
6″

Download PDF

HS-4030 Guided Hot Pipe Shoe (Double-T Base, 180° Insulation, with Bandstraps)

Hs 4030

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4030)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
14-1/2″
27”
4”
15″
28”
4”
15-1/2″
29”
4″
26”
6466
8621
16-1/4″
29-1/2”
4”
16-3/4″
30-1/2”
4”
17-1/4″
31-1/2”
4″
28”
6963
9284
17-1/4″
31-1/2”
4”
17-3/4″
32-1/2”
4”
18-1/4″
33-1/2”
4″
30”
7461
9948
18-1/4″
33-1/2”
4”
18-3/4″
34-1/2”
4”
19-1/4″
35-1/2”
4″
32”
7958
10611
19-1/4″
35-1/2”
4”
19-3/4″
36-1/2”
4”
20-1/4″
37-1/2”
4″
34”
8455
11274
20-1/4″
37-1/2”
4”
20-3/4″
38-1/2”
4”
21-1/4″
39-1/2”
4″
36”
8953
11937
21-1/4″
39-1/2”
4”
21-3/4″
40-1/2”
4”
22-1/4″
41-1/2”
4″
40”
9948
13263
23-1/4″
43-1/2”
4”
23-3/4″
44-1/2”
4”
24-1/4″
45-1/2”
4″
42”
10445
13927
24-1/4″
45-1/2”
4”
24-3/4″
46-1/2”
4”
25-1/4″
47-1/2”
4″

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
16″
30”
6”
16-1/2″
31”
6”
17″
32″
6″
17-1/2″
33”
6″
26”
6466
8621
17-3/4″
32-1/2”
6”
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2″
6”
19-1/4″
35-1/2”
6″
28”
6963
9284
18-3/4″
34-1/2”
6”
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2″
6”
20-1/4″
37-1/2”
6″
30”
7461
9948
19-3/4″
36-1/2”
6”
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2″
6”
21-1/4″
39-1/2”
6″
32”
7958
10611
20-3/4″
38-1/2”
6”
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2″
6”
22-1/4″
41-1/2”
6″
34”
8455
11274
21-3/4″
40-1/2”
6”
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2″
6”
23-1/4″
43-1/2”
6″
36”
8953
11937
22-3/4″
42-1/2”
6”
23-1/4″
43-1/2”
6”
23-3/4″
44-1/2″
6”
24-1/4″
45-1/2”
6″
40”
9948
13263
24-3/4″
46-1/2”
6”
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2″
6”
26-1/4″
49-1/2”
6″
42”
10445
13927
25-3/4″
48-1/2”
6”
26-1/4″
49-1/2”
6”
26-3/4″
50-1/2″
6″
27-1/4″
51-1/2”
6″

Download PDF

HS-4031 Guided Hot Pipe Shoe (Double-T Base, 360° Insulation, with Bolts)

Hs 4031

PIPE SIZE: 24″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-4031)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1”
1-1/2”
2”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
14-1/2″
27”
4”
15″
28”
4”
15-1/2″
29”
4″
26”
6466
8621
16-1/4″
29-1/2”
4”
16-3/4″
30-1/2”
4”
17-1/4″
31-1/2”
4″
28”
6963
9284
17-1/4″
31-1/2”
4”
17-3/4″
32-1/2”
4”
18-1/4″
33-1/2”
4″
30”
7461
9948
18-1/4″
33-1/2”
4”
18-3/4″
34-1/2”
4”
19-1/4″
35-1/2”
4″
32”
7958
10611
19-1/4″
35-1/2”
4”
19-3/4″
36-1/2”
4”
20-1/4″
37-1/2”
4″
34”
8455
11274
20-1/4″
37-1/2”
4”
20-3/4″
38-1/2”
4”
21-1/4″
39-1/2”
4″
36”
8953
11937
21-1/4″
39-1/2”
4”
21-3/4″
40-1/2”
4”
22-1/4″
41-1/2”
4″
40”
9948
13263
23-1/4″
43-1/2”
4”
23-3/4″
44-1/2”
4”
24-1/4″
45-1/2”
4″
42”
10445
13927
24-1/4″
45-1/2”
4”
24-3/4″
46-1/2”
4”
25-1/4″
47-1/2”
4″

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2-1/2”
3”
3-1/2″
4”
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
24”
5969
7958
16″
30”
6”
16-1/2″
31”
6”
17″
32″
6″
17-1/2″
33”
6″
26”
6466
8621
17-3/4″
32-1/2”
6”
18-1/4″
33-1/2”
6”
18-3/4″
34-1/2″
6”
19-1/4″
35-1/2”
6″
28”
6963
9284
18-3/4″
34-1/2”
6”
19-1/4″
35-1/2”
6”
19-3/4″
36-1/2″
6”
20-1/4″
37-1/2”
6″
30”
7461
9948
19-3/4″
36-1/2”
6”
20-1/4″
37-1/2”
6”
20-3/4″
38-1/2″
6”
21-1/4″
39-1/2”
6″
32”
7958
10611
20-3/4″
38-1/2”
6”
21-1/4″
39-1/2”
6”
21-3/4″
40-1/2″
6”
22-1/4″
41-1/2”
6″
34”
8455
11274
21-3/4″
40-1/2”
6”
22-1/4″
41-1/2”
6”
22-3/4″
42-1/2″
6”
23-1/4″
43-1/2”
6″
36”
8953
11937
22-3/4″
42-1/2”
6”
23-1/4″
43-1/2”
6”
23-3/4″
44-1/2″
6”
24-1/4″
45-1/2”
6″
40”
9948
13263
24-3/4″
46-1/2”
6”
25-1/4″
47-1/2”
6”
25-3/4″
48-1/2″
6”
26-1/4″
49-1/2”
6″
42”
10445
13927
25-3/4″
48-1/2”
6”
26-1/4″
49-1/2”
6”
26-3/4″
50-1/2″
6″
27-1/4″
51-1/2”
6″

These supports are used for several different applications including hanging, isolating, or in combination with standard pipe support hardware.

Download PDF

HS-6010 Hot Pipe Shoes (Pre-Insulated Hanger Support, 360° insulation)

Hs 6010

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-6010)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation thickness
Pipe
Vertical
Vertical
1″
1-1/2″
2″
2-1/2″
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
1/2”
70
139
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
3/4”
87
174
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1”
109
218
3-3/4”
4-3/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/4”
138
275
3-3/4”
5-1/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/2”
158
315
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8”
9-7/8″
11”
2”
197
394
5”
6-1/16”
7-1/4”
8-1/8”
9-1/8”
10-1/8″
11-1/4”
2-1/2”
238
477
5-1/2”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3”
290
580
6-1/16”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3-1/2”
332
663
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
4”
373
746
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
5”
461
922
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4”
13-1/4″
14-1/2”
6”
549
1098
9-15/16”
10-3/8”
11-1/2”
12-1/2”
13-1/2”
14-3/4″
15-3/4”
8”
715
1430
11-1/2”
12-1/2”
13-1/2”
14-3/4”
15-3/4”
16-3/4″
17-3/4”
10”
1782
2673
13-1/2”
14-3/4”
15-3/4”
16-3/4”
17-3/4”
18-3/4″
19-3/4”
12”
2114
3171
13-15/16”
16-3/4”
17-3/4”
18-3/4”
19-3/4”
20-3/4″
21-3/4”
14”
2321
3482
17”
18”
19”
20”
21”
22″
23”
16”
2653
3979
19”
20”
21”
22”
23”
24″
25”
18”
2984
4476
21”
22”
23”
24”
25”
26″
27”
20”
3316
4974
23”
24”
25”
26”
27”
28″
29”
24”
5969
7958
27”
28”
29”
30”
31”
32″
33”
26”
6466
8621
29-1/2”
30-1/2”
31-1/2”
32-1/2”
33-1/2”
34-1/2″
35-1/2”
28”
6963
9284
31-1/2”
32-1/2”
33-1/2”
34-1/2”
35-1/2”
36-1/2″
37-1/2”
30”
7461
9948
33-1/2”
34-1/2”
35-1/2”
36-1/2”
37-1/2”
38-1/2″
39-1/2”
32”
7958
10611
35-1/2”
36-1/2”
37-1/2”
38-1/2”
39-1/2”
40-1/2″
41-1/2”
34”
8455
11274
37-1/2”
38-1/2”
39-1/2”
40-1/2”
41-1/2”
42-1/2″
43-1/2”
36”
8953
11937
39-1/2”
40-1/2”
41-1/2”
42-1/2”
43-1/2”
44-1/2″
45-1/2”
40”
9948
13263
43-1/2”
44-1/2”
45-1/2”
46-1/2”
47-1/2”
48-1/2″
49-1/2”
42”
10445
13927
45-1/2”
46-1/2”
47-1/2”
48-1/2”
49-1/2”
50-1/2″
51-1/2”

Download PDF

HS-6020 Hot Pipe Shoes (Double Clamp )

Hs 6020

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Carbon Steel, Stainless Steel & Chrome-Moly
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-6020)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Pipe
Vertical
Vertical
size
Load(kips)
Load(kips)
W
H
1/2”
5.76
8.64
4″
4″
3/4”
5.76
8.64
4″
4″
1”
5.76
8.64
4″
4″
1-1/4”
5.76
8.64
4″
4″
1-1/2”
5.76
8.64
4″
4″
2”
5.76
8.64
4″
4″
2-1/2”
5.76
8.64
4″
4″
3”
8.64
12.96
6″
6″
3-1/2”
8.64
12.96
6″
6″
4”
8.64
12.96
6″
6″
5”
8.64
12.96
6″
6″
6”
8.64
12.96
6″
6″
8”
11.52
17.28
8″
6″
10”
11.52
17.28
8″
6″
12”
17.28
25.92
12″
6″
14”
17.28
25.92
12″
6″
16”
21.60
32.40
15″
6″
18”
23.04
34.56
16″
8″
20”
25.92
38.88
18″
8″
24”
31.68
47.52
22″
8″
26”
31.68
47.52
22″
8″
28”
31.68
47.52
22″
8″
30”
31.68
47.52
22″
8″
32”
31.68
47.52
22″
8″
34”
31.68
47.52
22″
8″
36”
31.68
47.52
22″
8″
40”
37.44
56.16
26″
8″
42”
43.20
64.80
30″
8″

Download PDF

HS-6030 Hot Pipe Shoes (Dummy Leg)

Hs 6030

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:–
SHOE LTH,(L): —
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-6030)-nps-thk.-l
LOADS: —

Pipe
Vertical
size
Load(kips)
T
W
1-1/2″
4.32
1″
6″
2″
4.32
1″
6″
2-1/2″
4.32
1″
6″
3″
4.32
1″
6″
3-1/2″
5.88
1″
7″
4″
5.88
1″
7″
5″
9.72
1″
9″
6″
9.72
1″
9″
8″
12.00
2″
10″
10″
17.28
2″
12″
12″
23.52
2″
14″
14″
30.72
2″
16″
16″
38.88
3″
18″
18″
48.00
3″
20″
20″
58.08
3″
22″
24″
81.12
3″
26″

Download PDF

HS-6040 Hot Pipe Shoes (Roller Type)

Hs 6040

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-6040)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation thickness
Pipe
Vertical
Vertical
1″
1-1/2″
2″
2-1/2″
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
1/2”
70
139
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
3/4”
87
174
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1”
109
218
3-3/4”
4-3/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/4”
138
275
3-3/4”
5-1/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/2”
158
315
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8”
9-7/8″
11”
2”
197
394
5”
6-1/16”
7-1/4”
8-1/8”
9-1/8”
10-1/8″
11-1/4”
2-1/2”
238
477
5-1/2”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3”
290
580
6-1/16”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3-1/2”
332
663
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
4”
373
746
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
5”
461
922
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4”
13-1/4″
14-1/2”
6”
549
1098
9-15/16”
10-3/8”
11-1/2”
12-1/2”
13-1/2”
14-3/4″
15-3/4”
8”
715
1430
11-1/2”
12-1/2”
13-1/2”
14-3/4”
15-3/4”
16-3/4″
17-3/4”
10”
1782
2673
13-1/2”
14-3/4”
15-3/4”
16-3/4”
17-3/4”
18-3/4″
19-3/4”
12”
2114
3171
13-15/16”
16-3/4”
17-3/4”
18-3/4”
19-3/4”
20-3/4″
21-3/4”
14”
2321
3482
17”
18”
19”
20”
21”
22″
23”
16”
2653
3979
19”
20”
21”
22”
23”
24″
25”
18”
2984
4476
21”
22”
23”
24”
25”
26″
27”
20”
3316
4974
23”
24”
25”
26”
27”
28″
29”
24”
5969
7958
27”
28”
29”
30”
31”
32″
33”
26”
6466
8621
29-1/2”
30-1/2”
31-1/2”
32-1/2”
33-1/2”
34-1/2″
35-1/2”
28”
6963
9284
31-1/2”
32-1/2”
33-1/2”
34-1/2”
35-1/2”
36-1/2″
37-1/2”
30”
7461
9948
33-1/2”
34-1/2”
35-1/2”
36-1/2”
37-1/2”
38-1/2″
39-1/2”
32”
7958
10611
35-1/2”
36-1/2”
37-1/2”
38-1/2”
39-1/2”
40-1/2″
41-1/2”
34”
8455
11274
37-1/2”
38-1/2”
39-1/2”
40-1/2”
41-1/2”
42-1/2″
43-1/2”
36”
8953
11937
39-1/2”
40-1/2”
41-1/2”
42-1/2”
43-1/2”
44-1/2″
45-1/2”
40”
9948
13263
43-1/2”
44-1/2”
45-1/2”
46-1/2”
47-1/2”
48-1/2″
49-1/2”
42”
10445
13927
45-1/2”
46-1/2”
47-1/2”
48-1/2”
49-1/2”
50-1/2″
51-1/2”

Download PDF

HS-6050 Hot Pipe Shoes (Hanging Roller)

Hs 6050

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-6050)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation thickness
Pipe
Vertical
Vertical
1″
1-1/2″
2″
2-1/2″
3″
3-1/2″
4″
size
Load(lbs)
Load(lbs)
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
1/2”
70
139
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
3/4”
87
174
3-1/8”
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1”
109
218
3-3/4”
4-3/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/4”
138
275
3-3/4”
5-1/4”
5-13/16”
6-7/8”
7-7/8”
8-7/8″
9-7/8”
1-1/2”
158
315
4-1/4”
5-1/4”
6-7/8”
7-7/8”
8-7/8”
9-7/8″
11”
2”
197
394
5”
6-1/16”
7-1/4”
8-1/8”
9-1/8”
10-1/8″
11-1/4”
2-1/2”
238
477
5-1/2”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3”
290
580
6-1/16”
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4″
12-1/4”
3-1/2”
332
663
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
4”
373
746
7-1/8”
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4″
13-1/4”
5”
461
922
8-1/8”
9-1/8”
10-1/8”
11-1/4”
12-1/4”
13-1/4″
14-1/2”
6”
549
1098
9-15/16”
10-3/8”
11-1/2”
12-1/2”
13-1/2”
14-3/4″
15-3/4”
8”
715
1430
11-1/2”
12-1/2”
13-1/2”
14-3/4”
15-3/4”
16-3/4″
17-3/4”
10”
1782
2673
13-1/2”
14-3/4”
15-3/4”
16-3/4”
17-3/4”
18-3/4″
19-3/4”
12”
2114
3171
13-15/16”
16-3/4”
17-3/4”
18-3/4”
19-3/4”
20-3/4″
21-3/4”
14”
2321
3482
17”
18”
19”
20”
21”
22″
23”
16”
2653
3979
19”
20”
21”
22”
23”
24″
25”
18”
2984
4476
21”
22”
23”
24”
25”
26″
27”
20”
3316
4974
23”
24”
25”
26”
27”
28″
29”
24”
5969
7958
27”
28”
29”
30”
31”
32″
33”
26”
6466
8621
29-1/2”
30-1/2”
31-1/2”
32-1/2”
33-1/2”
34-1/2″
35-1/2”
28”
6963
9284
31-1/2”
32-1/2”
33-1/2”
34-1/2”
35-1/2”
36-1/2″
37-1/2”
30”
7461
9948
33-1/2”
34-1/2”
35-1/2”
36-1/2”
37-1/2”
38-1/2″
39-1/2”
32”
7958
10611
35-1/2”
36-1/2”
37-1/2”
38-1/2”
39-1/2”
40-1/2″
41-1/2”
34”
8455
11274
37-1/2”
38-1/2”
39-1/2”
40-1/2”
41-1/2”
42-1/2″
43-1/2”
36”
8953
11937
39-1/2”
40-1/2”
41-1/2”
42-1/2”
43-1/2”
44-1/2″
45-1/2”
40”
9948
13263
43-1/2”
44-1/2”
45-1/2”
46-1/2”
47-1/2”
48-1/2″
49-1/2”
42”
10445
13927
45-1/2”
46-1/2”
47-1/2”
48-1/2”
49-1/2”
50-1/2″
51-1/2”

Download PDF

HS-6060 Hot Pipe Shoes (FoamGlas® – Polyurethane Hybrid Shoe )

Hs 6060

PIPE SIZE: 1/2″ to 42″ NPS
MATERIAL: Galvanized or HDG Carbon Steel
INSULATION: High density calcium silicate
TEMP. RANGE: Ambient to 1200 degrees F
LAYERING SY.:See layering charts
SHOE LTH,(L): Standard shoe available in 12″ & 18″ lengths
TO ORDER: Specify pipe size, insulation THK., length HENCE: (hs-6060)-nps-thk.-l
LOADS: All loads on adjacent chart have a safety factor of 5

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
1″
1-1/2″
2″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3″
3-1/8″
4″
3″
4-1/4″
4”
3″
5-1/4″
4”
3/4”
87
174
3″
3-1/8″
4″
3″
4-1/4″
4”
3″
5-1/4″
4”
1”
109
218
3″
3-3/4″
4″
3″
4-3/4″
4”
3″
5-15/16″
4”
1-1/4”
138
275
3″
3-3/4″
4″
3″
4-3/4″
4”
3″
5-15/16″
4”
1-1/2”
158
315
3″
4-1/4″
4″
3″
5-1/4″
4”
3″
6-7/8″
4”
2”
197
394
4″
5″
4″
4″
6-1/16″
4”
4″
7-1/4″
4”
2-1/2”
238
477
4″
5-1/2″
4″
4″
7-1/8″
4”
4″
8-1/8″
4”
3”
290
580
4″
6-1/16″
4″
4″
7-1/8″
4”
4″
8-1/8″
4”
3-1/2”
332
663
4″
7-1/8″
4″
4″
8-1/8″
4”
4″
9-1/8″
4”
4”
373
746
4″
7-1/8″
4″
4″
8-1/8″
4”
4″
9-1/8″
4”
5”
461
922
4″
8-1/8″
4″
4″
9-1/8″
4”
4″
10-1/8″
4”
6”
549
1098
6″
9-3/8″
4″
6″
10-3/8″
4”
6″
11-1/2″
4”
8”
715
1430
6-1/2″
11-1/2″
4″
5-7/8″
12-1/2″
4”
6-3/8″
13-1/2″
4”
10”
1782
2673
7-1/2″
13-1/2″
4″
6-7/8″
14-1/2″
4”
7-3/8″
15-1/2″
4”
12”
2114
3171
8-1/8″
14-3/4″
4″
7-1/2″
15-3/4″
4”
8-1/2″
17-3/4″
4”
14”
2321
3482
9-1/2″
17″
4″
8-1/2″
18″
4”
9″
19″
4”
16”
2653
3979
10-1/2″
19″
4″
9-1/2″
20″
4”
10″
21″
4”
18”
2984
4476
11-1/2″
21″
4″
10-1/2″
22″
4”
11″
23″
4”
20”
3316
4974
12-1/2″
23″
4″
11-1/2″
24″
4”
12″
25″
4”
24”
5969
7958
14-1/2″
27″
4″
13-1/2″
28″
4”
14″
29″
4”
26”
6466
8621
16-1/4″
29-1/2″
4″
14-1/2″
30-1/2″
4″
15″
31-1/2″
4″
28”
6963
9284
17-1/4″
31-1/2″
4″
15-1/2″
32-1/2″
4″
16″
33-1/2″
4″
30”
7461
9948
18-1/4″
33-1/2″
4″
16-1/2″
34-1/2″
4″
17″
35-1/2″
4″
32”
7958
10611
19-1/4″
35-1/2″
4″
17-1/2″
36-1/2″
4″
18″
37-1/2″
4″
34”
8455
11274
20-1/4″
37-1/2″
4″
18-1/2″
38-1/2″
4″
19″
39-1/2″
4″
36”
8953
11937
21-1/4″
39-1/2″
4″
19-1/2″
40-1/2″
4″
20″
41-1/2″
4″
40”
9948
13263
23-1/4″
43-1/2″
4″
21-1/2″
44-1/2″
4″
22″
45-1/2″
4″
42”
10445
13927
24-1/4″
42-1/2″
4″
22-1/2″
46-1/2″
4″
23″
47-1/2″
4″

 

L=12″
L=18″
Insulation Thickness
Pipe
Vertical
Vertical
2 1/2″
3″
3 1/2″
4″
size
Load(lbs)
Load(lbs)
W
O.D.
H
W
O.D.
H
W
O.D.
H
W
O.D.
H
1/2”
70
139
3″
6-7/8″
4”
3″
7-7/8″
4″
3″
8-7/8″
6″
3″
9-7/8″
6”
3/4”
87
174
3″
6-7/8″
4”
3″
7-7/8″
4″
3″
8-7/8″
6″
3″
9-7/8″
6”
1”
109
218
3″
6-7/8″
4”
3″
7-7/8″
4″
3″
8-7/8″
6″
3″
9-7/8″
6”
1-1/4”
138
275
3″
6-7/8″
4”
3″
7-7/8″
4″
3″
8-7/8″
6″
3″
9-7/8″
6”
1-1/2”
158
315
3″
7-7/8″
4”
3″
8-7/8″
4″
3″
9-7/8″
6″
3″
11-1/2″
6”
2”
197
394
4″
8-1/8″
4”
4″
9-1/8″
4″
4″
10-1/8″
6″
4″
11-1/2″
6”
2-1/2”
238
477
4″
9-1/8″
4”
4″
10-1/8″
4″
4″
11-1/4″
6″
4″
12-1/4″
6”
3”
290
580
4″
9-1/8″
4”
4″
10-1/8″
4″
4″
11-1/4″
6″
4″
12-1/4″
6”
3-1/2”
332
663
4″
10-1/8″
4”
4″
11-1/8″
4″
4″
12-1/4″
6″
4″
13-1/4″
6”
4”
373
746
4″
10-1/8″
4”
4″
11-1/8″
4″
4″
12-1/4″
6″
4″
13-1/4″
6”
5”
461
922
4″
11-1/8″
4”
4″
12-1/4″
4″
4″
13-1/2″
6″
4″
14-1/2″
6”
6”
549
1098
6″
12-1/2″
4”
6″
13-1/2″
4″
6″
14-3/4″
6″
6″
15-3/4″
6”
8”
715
1430
7″
14-3/4″
4″
7-1/2″
15-3/4″
4″
8″
16-3/4″
6″
8-1/2″
17-3/4″
6”
10”
1782
2673
8″
16-3/4″
4″
8-1/2″
17-3/4″
4″
9″
18-3/4″
6″
9-1/2″
19-3/4″
6”
12”
2114
3171
9″
18-3/4″
4″
9-1/2″
19-3/4″
4″
10″
20-3/4″
6″
10-1/2″
21-3/4″
6”
14”
2321
3482
9-1/2″
20″
4″
10″
21″
4″
10-1/2″
22″
6″
11″
23″
6”
16”
2653
3979
10-1/2″
22″
4″
11″
23″
4″
11-1/2″
24″
6″
12″
25″
6″
18”
2984
4476
11-1/2″
24″
4″
12″
25″
4″
12-1/2″
26″
6″
13″
27″
6″
20”
3316
4974
12-1/2″
26″
4″
13″
27″
4″
13-1/2″
28″
6″
14″
29″
6″
24”
5969
7958
14-1/2″
30″
4″
15″
31″
4″
15-1/2″
32″
6″
16″
33″
6″
26”
6466
8621
15-1/2″
32-1/2″
4″
16″
33-1/2″
4″
16-1/2″
34-1/2″
6″
17″
35-1/2″
6″
28”
6963
9284
16-1/2″
34-1/2″
4″
17″
35-1/2″
4″
17-1/2″
36-1/2″
6″
18″
37-1/2″
6″
30”
7461
9948
17-1/2″
36-1/2″
4″
18″
37-1/2″
4″
18-1/2″
38-1/2″
6″
19″
39-1/2″
6″
32”
7958
10611
18-1/2″
38-1/2″
4″
19″
39-1/2″
4″
19-1/2″
40-1/2″
6″
20″
41-1/2″
6″
34”
8455
11274
19-1/2″
40-1/2″
4″
20″
41-1/2″
4″
20-1/2″
42-1/2″
6″
21″
43-1/2″
6″
36”
8953
11937
20-1/2″
42-1/2″
4″
21″
43-1/2″
4″
21-1/2″
44-1/2″
6″
22″
45-1/2″
6″
40”
9948
13263
22-1/2″
46-1/2″
4″
23″
47-1/2″
4″
23-1/2″
48-1/2″
6″
24″
49-1/2″
6″
42”
10445
13927
23-1/2″
48-1/2″
4″
24″
49-1/2″
4″
24-1/2″
50-1/2″
6″
25″
51-1/2″
6″

Size Range: For use with 1/2″ through 72″, most designs. insulation thickness of 1″. 1-1/2″, 2″, 2-1/2″, 3″, 3-1/2″, 4″ and larger sizes where specified.

How to Size: Refer to “Insulation Chart” below for Sizing the Insulation Material.

Ordering: Specify figure number, pipe size, insulation thickness, and insulating material

Example:
Fig. 4700-4-3-B
• 4700 = Type of Insulated Shoe (cold)
• 4 = Nominal Pipe Size
• 3= Insulation Thickness
• B = Insulation Material (Micarta)

NOMINAL INSULATION THICKNESS (in.)INSULATION O.D. (in.)APPROX. INSULATION THICKNESS (in.)

Pipe size: 1/2" (O.840 O.D.)

12 7/81
1 1/241 9/16
252 1/16
2 1/26 5/82 7/8
37 5/83 3/8
3 1/28 5/83 7/8
49 5/84 3/8

Pipe size: 3/4" (1.050 O.D.)

12 7/87/8
1 1/241 7/16
251 15/16
2 1/26 5/82 3/4
37 5/83 1/4
3 1/28 5/83 3/4
49 5/84 1/4

Pipe size: 1" (1.315 O.D.)

13 1/21 1/16
1 1/24 1/21 9/16
25 9/162 1/8
2 1/26 5/82 5/8
37 5/83 1/8
3 1/28 5/83 5/8
49 5/84 1/8

Pipe size: 1 1/4" (1.66 O.D.)

13 1/215/16
1 1/251 11/16
25 9/161 15/16
2 1/26 5/82 1/2
37 5/83
3 1/28 5/83 1/2
49 5/84

Pipe size: 1 1/2" (1.90 O.D.)

141 1/16
1 1/251 9/16
26 5/82 3/8
2 1/27 5/82 7/8
38 5/83 3/8
3 1/29 5/83 7/8
410 3/44 7/16

Pipe size: 2" (2 3/8" O.D.)

14 1/21 1/16
1 1/25 9/161 9/16
26 5/82 1/8
2 1/27 5/82 5/8
38 5/83 1/8
3 1/29 5/83 5/8
410 3/44 3/16

Pipe size: 2 1/2" (2 7/8" O.D.)

151 1/16
1 1/26 5/81 7/8
27 5/82 3/8
2 1/28 5/82 7/8
39 5/83 3/8
3 1/210 3/43 15/16
411 3/44 7/16

Pipe size: 3" (3 1/2" O.D.)

15 9/161
1 1/26 5/81 9/16
27 5/82 1/16
2 1/28 5/82 9/16
39 5/83 1/16
3 1/210 3/43 5/8
411 3/44 1/8

Pipe size: 3 1/2" (4" O.D.)

16 5/81 5/16
1 1/27 5/81 13/16
28 5/82 5/16
2 1/29 5/82 13/16
310 3/43 3/8
3 1/211 3/43 7/8
412 3/44 3/8

Pipe size: 4" (4 1/2" O.D.)

16 5/81 1/16
1 1/27 5/81 9/16
28 5/82 1/16
2 1/29 5/82 9/16
310 3/43 1/8
3 1/211 3/43 5/8
412 3/44 1/8

Pipe size: 4 1/2" (5" O.D.)

17 5/81 5/16
1 1/28 5/81 13/16
29 5/82 5/16
2 1/210 3/42 7/8
311 3/43 3/8
3 1/212 3/43 7/8
4144 1/2

Pipe size: 5" (5 9/16" O.D.)

17 5/81
1 1/28 5/81 1/2
29 5/82
2 1/210 3/42 9/16
311 3/43 1/16
3 1/212 3/43 9/16
4144 3/16

Pipe size: 6" (6 5/8" O.D.)

18 5/815/16
1 1/29 5/81 7/16
210 3/42
2 1/211 3/42 1/2
312 3/43
3 1/2143 5/8
4154 1/8

Pipe size: 7" (7 5/8" O.D.)

19 5/81
1 1/210 3/41 1/2
211 3/42
2 1/212 3/42 1/2
3143 1/8
3 1/2153 5/8
4164 1/8

Pipe size: 8" (8 5/8" O.D.)

110 3/41 1/16
1 1/211 3/41 1/2
212 3/42
2 1/2142 5/8
3153 1/8
3 1/2163 5/8
4174 1/8

Pipe size: 9" (9 5/8" O.D.)

111 3/41 1/16
1 1/212 3/41 1/2
2142
2 1/2152 5/8
3163 1/8
3 1/2173 5/8
4184 1/8

Pipe size: 10" (10 3/4" O.D.)

112 3/41
1 1/2141 9/16
2152 1/16
2 1/2162 9/16
3173 1/16
3 1/2183 9/16
4194 1/16

Pipe size: 11" (11 3/4" O.D.)

1141 1/8
1 1/2151 9/16
2162 1/16
2 1/2172 9/16
3183 1/16
3 1/2193 9/16
4204 1/16

Pipe size: 12" (12 3/4" O.D.)

1151 1/8
1 1/2161 9/16
2172 1/16
2 1/2182 9/16
3193 1/16
3 1/2203 9/16
4214 1/16

Pipe size: 14" (14" O.D.)

1162
1 1/2171 7/16
2181 15/16
2 1/2192 7/16
3202 15/16
3 1/2213 7/16
4223 15/16
Large sizes, insulation O.D. are in 1" increments.

Insulation thicknesses through 36" same as nominal.

All dimensions rounded to the nearest 1/16".

hbspt.forms.create({
portalId: “88145”,
formId: “387a2f0a-000b-4fec-ace9-674cd4cf472e”
});

Top