Search 



 Pipe Shoes & Anchors

 Supports with no Field Welding
 U-Bolt Cradle Support:

  Bolt Cradle Support:
cradle support, boned/bolted slide plates [ Fig 900: welded | Fig 1000: bolted ] 
cradle support, guided & slide plates [ Fig 1100: welded | Fig 1200: bolted ]

  Heavy Duty:
Fig 2000: pipe saddles
Fig 2000~S: slide bearing details

  Cylinder/Spider Guide:

 Catalog Request 
 
Fill out the request form to get your copy today!

 Fabricated Pipe Shoes and Anchors
 

FIG. 2000-S

SLIDE BEARING DETAILS FOR HEAVY DUTY PIPE SADDLES

NOTES:

  1. TFE - Dupont Resin (PTFE, 25% glass filled or Equal) Properties shall be as follows:

    Filler - 25% Glass Fiber

    Specific Gravity - 2.22 (Nominal)

    Tensile Strength - 2100 psi. Minimum and to ASTM D 1457.

    Compressive Strength - 1870 psi. Minimum at 0.2% Deformation and to ASTM D695.

  2. TFE - Dupont Resin (PTFE, 25% glass filled or Equal) Pad shall be chemically etched and bonded to the Carbon Steel Plate using a hot setting epoxy resin adhesive.

  3. Maximum Allowable Pipe Operating Temperature 325° F.

  4. For 20" - 60" Pipe Saddle Details refer to PTP Fig. 2000.

  5. Maximum Axial Movement on support is 6" (3" each direction.) If Axial movement is in excess of 12" the base width shall be increased accordingly.

DIMENSIONS (in.)

PIPE SIZE

A

B

20

20

14

22

20

14

24

20

14

26

24

18

28

24

18

30

24

18

32

30

24

34

30

24

36

30

24

38

35

29

40

35

29

42

35

29

48

45

39

54

51

45

60

57

51

713-731-0030 / Phone · 713- 731-8640 / Fax · 1-800-787-5914 / Toll Free · info@pipingtech.com / E-mail

Copyright © 2002, Piping Technology & Products, Inc. All Rights Reserved. All of the information and graphics contained in this page and subsequent pages are copyright © 1992-2002 Piping Technology & Products, Inc. and MAY NOT be reproduced without permission.