Support Assembly Components: Clevis Hangers

   

FIG. 200

TRAPEZE ROLLER HANGER

MATERIAL:

Cast iron roll and sockets; steel roll rod.

SERVICE:

For suspension of pipe from two rods where longitudinal movement due to expansion or contraction may occur.

ADJUSTMENT:

Adjustment socket permits vertical adjustment at the roll.

HOW TO SIZE:

(1) If the roll is to non-insulated pipe, select the size directly from nominal pipe size.

 

(2) If used with pipe covering protection saddle, see pages 126 - 127 for size of pipe roll.

 

(3) If roll is to support covered pipe, select the nominal pipe size (column 1) which corresponds to the outside diameter of covering and saddle (column 2).

 

NOMINAL PIPE SIZE

MAX. O.D. OF COVERING

ADJUSTED SOCKET No.

MAX. RECOM.SAFE LOAD lbs.

APPROX. WEIGHT per 100

A

B

C

D

E

F

G

H

J

1

2

1 -- 3/8

600

45

4 1/8

3

1 1/2

1

3/4

3/8

3/8

1 1/16

9/16

1 1/4

2 1/2

1 -- 3/8

600

48

4 1/2

3 3/8

1 7/8

1 1/16

3/4

3/8

3/8

1 1/4

9/16

1 1/2

2 3/4

1 -- 3/8

600

51

4 3/4

3 5/8

2 1/8

1 1/8

3/4

3/8

3/8

1 3/8

9/16

2

3 1/4

1 -- 3/8

600

57

5 1/4

4 1/8

2 5/8

1 3/16

3/4

3/8

3/8

1 5/8

9/16

2 1/2

3 3/4

2 -- 1/2

660

100

6 1/4

4 7/8

3 1/8

1 3/8

7/8

1/2

1/2

1 15/16

11/16

3

4 1/2

2 -- 1/2

700

110

6 7/8

5 1/2

3 3/4

1 7/16

7/8

1/2

1/2

2 1/4

11/16

3 1/2

5

2 -- 1/2

750

135

7 1/2

6 1/8

4 1/4

1 5/8

1

1/2

1/2

2 9/16

3/4

3 -- 1/2

150

7 3/4

6 1/4

5/8

3/4

4

5 1/2

2 -- 1/2

750

150

8

6 5/8

4 3/4

1 3/4

1

1/2

1/2

2 13/16

3/4

3 -- 1/2

165

8 1/4

6 3/4

5/8

3/4

5

7

2 -- 5/8

750

226

9 7/16

8 1/16

5 13/16

2

1 1/8

5/8

1/2

3 7/16

13/16

3 -- 5/8

257

9 11/16

5/8

7/8

6

8 1/4

2 -- 3/4

1070

378

10 15/16

9 9/16

6 7/8

2 5/16

1 1/4

3/4

1/2

4

7/8

3 -- 3/4

416

11 3/16

5/8

1

4 -- 3/4

445

11 7/16

3/4

1

8

10 1/2

2 -- 7/8

1350

585

13 5/16

11 15/16

8 7/8

2 13/16

1 1/2

7/8

1/2

5 1/8

15/16

3 -- 7/8

625

13 9/16

5/8

1 1/16

4 -- 7/8

690

13 13/16

3/4

1 3/16

5 -- 7/8

715

14 1/16

7/8

1 1/8

10

12 3/4

2 -- 7/8

1730

838

15 7/16

14 1/16

11

3 3/8

1 3/4

7/8

1/2

6 3/8

15/16

3 -- 7/8

862

15 11/16

5/8

1 1/16

4 -- 7/8

920

15 15/16

3/4

1 3/16

5 -- 7/8

950

16 3/16

7/8

1 1/8

12

14 3/4

3 -- 1

2400

1465

17 7/16

15 13/16

12 1/2

3 7/8

2

1

5/8

7 7/16

1 1/8

4 -- 1

1525

17 11/16

3/4

1 1/4

5 -- 1

1590

17 15/16

7/8

1 1/4

14

16 1/4

5 -- 1 1/8

3130

2360

19 7/8

17 3/4

14 1/4

4 5/8

2 1/2

1 1/8

7/8

8 3/8

1 7/16

6 -- 1 1/8

2425

20 1/8

1

1 3/8

16

18

5 -- 1 1/4

3970

3080

21 7/8

19 3/4

16 1/4

5

2 5/8

1 1/4

7/8

9 7/16

1 1/2

6 -- 1 1/4

3185

22 1/8

1

1 1/2

7 -- 1 1/4

3260

22 3/8

1 1/8

1 1/2

18

20 1/4

5 -- 1 1/4

4200

3370

24

21 7/8

18 1/4

5 7/16

2 3/4

1 1/4

7/8

10 1/2

1 1/2

6 -- 1 1/4

3475

24 1/4

1

1 1/2

7 -- 1 1/4

3550

24 1/2

1 1/8

1 1/2

20

22 1/2

8 -- 1 3/8

4550

4700

27 1/4

24 1/4

20 1/4

6

3

1 1/4

1 1/4

11 5/8

1 5/8

24

26 1/2

6 -- 1 1/2

6160

7255

31

28 5/8

24 1/4

7 3/16

3 5/8

1 1/2

1

14

1 13/16

7 -- 1 1/2

7365

31 1/4

1 1/8

1 15/16

8 -- 1 1/2

7500

31 5/8

1 1/4

2 1/16

9 -- 1 1/2

7630

32 1/8

1 1/2

1 3/4

30

32 1/2

8 -- 1 7/8

7290

12690

38 1/2

35 1/2

30 1/4

8 15/16

4 1/2

1 3/4

1 1/4

17 7/16

2 1/4

9 -- 1 7/8

12990

39

1 1/2

2 7/16

10 -- 1 7/8

13400

39 7/8

1 7/8

2 1/8


713-731-0030 / Phone · 713- 731-8640 / Fax · 1-800-787-5914 / Toll Free · info@pipingtech.com / E-mail


Copyright © 2002, Piping Technology & Products, Inc. All Rights Reserved. All of the information and graphics contained in this page and subsequent pages are copyright © 1992-2002 Piping Technology & Products, Inc. and MAY NOT be reproduced without permission.