U-Type Constants with Rollers to Reduce Friction

July 29, 2009
U-Type Constants With Rollers To Reduce Friction
U-Type Constants with Rollers to Reduce Friction
U-Type Constants With Rollers To Reduce Friction
Rollers

This constant utilizes sealed cam follower roller bearings in place of slide plates that are generally used between the moving table and stationary frame. The rollers help to reduce the friction on the table, reduce residual loads which improve constant deviation, and help to restrict table movement in horizontal directions. These U-Type constants are fabricated from A36 carbon steel with dimensions of 28″H x 37″L x 17″W. The boxing, bolting patterns and loading table location are custom designed per customer specifications. The design also includes a graphite plate bonded to the top of the load flange to reduce the friction between the constant load flange and the saddle support above it. The supports are designed to carry 3015 lb. of piping load with an upward travel of 6″. The constants underwent standard load and travel testing before being shipped to an energy plant.

Want to learn more about constant springs? Instantly view an archived constant webinar!
Access-Our-Webinar-Archives

Read More

Flue Gas Duct Damper

July 15, 2009

 

Flue Gas Duct Damper
Flue Gas Duct Damper

This damper was fabricated from a combination of 304 stainless steel and Inconel®. It is designed as a shut-off damper to control the flow of flue gas in an ammonia plant. The damper will be connected to a motor-driven control system by the linkage shown in the picture. The overall dimensions are 10′ x 6′ with a weight of 2,200 lb. It was painted with standard inorganic zinc primer and top coat per customer specifications. The damper went through visual inspection, dye-penetrant, and functional testing before being shipped to the customer. Refractory lining, utilized to withstand the high temperatures, will be added during installation.

Do you have an application that requires a damper? Get pricing today!
Request-A-Quote

Read More

Pre-Insulated Base Supports for a LNG Plant

July 1, 2009
Pre-Insulated Base Supports For A Lng Plant
Pre-Insulated Base Supports for a LNG Plant
Pre-Insulated Base Supports For A Lng Plant
Front View

These low-temperature base supports are fabricated from carbon steel with a hot dipped galvanize finish and range from 23″ to 37″ in height. The supports are 18″ in diameter with a base plate of 20″W x 20″L x 1″H and are designed to support pipes ranging in size from 24″ to 30″. The base supports are fabricated with micarta insulation and will be utilized in a LNG plant as a base beneath a cold temperature pipe.

Do you require pre-insulated supports for your project? Get a quote today!
Request-A-Quote


Read More
Top