Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Custom Variable Springs for Power Plant — The Pipe Supports Blog
Home > Engineered Spring Supports > Custom Variable Springs for Power Plant

Custom Variable Springs for Power Plant


Custom Variable Springs for Power Plant

Custom Variable Springs for Power Plant

Custom Variable Springs for Power Plant

Rod & Clevis Assemblies

Piping Technology and Products, Inc. custom designed and manufactured variable springs to be used in conjunction with a rod and clevis assembly for a power plant in West Virginia.  Since the operating loads specified by the customer were greater than the maximum loads for the largest PT&P spring, custom units needed to be built for this application. The springs were fabricated using a large spring coil, normally only used in constant spring assemblies. The spring is 20 1/2″ in diameter and has a standing height of 51″. All components of the pipe hanger assembly were made from carbon steel and were supplied with a hot-dipped galvanized finish. The spring is 20 1/2″ in diameter and has a standing height of 51″.  The rods will be attached to type A variable springs designed to support loads from 850 lbs. to 13,300 lbs. Manufactured from A-36 carbon steel, the rods are 3/4″ to 2″ in diameter and range in length from 68″ to 95″.

To prevent contamination at high temperatures, a non-galvanized finish was applied to the rods per customer’s request. Prior to delivery, a 100% dye-penetrant test was preformed to ensure quality.  The variable springs were tested in the load cell to insure proper operation and also to set the cold load to the specifications as provided by the customer.

Want to learn more about variable springs? Instantly view a past variable webinar!


access-our-webinar-archives



  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy