45,000 lb. Load CAD Spring Support

November 25, 1993
45,000 Lb. Load Cad Spring Support
45,000 lb. Load CAD Spring Support

The photograph above shows a CAD Spring Support to handle over 45,000 lb. Load with movement in excess of 4”. This is a PTP-8, size 22 Type F Spring Support utilizing four stacked hellcat coils with eliminates the possibility of binding or squirming, problems which baffled others attempting development of such a design. Travel stops hold the coils in compression to cold load, while hydrostatic test spots prevent the coils from “bottoming out” during line tests. The spring casing and baseplate, which eliminates the need to weld after galvanizing, are paramount to the success of this design.

Do you require a spring support for an upcoming project? Let us price one for you today!

Request-A-Quote

Read More

Pipe Shoes for Saudi Arabian Oil Company

November 23, 1993
Pipe Shoes For Saudi Arabian Oil Company
Pipe Shoes for Saudi Arabian Oil Company

This photograph shows a number of 60” pipe shoes fabricated by Piping Technology & Products, Inc. of Houston, TX for export to Saudi Arabia. The Saudi Arabian Oil Company is purchasing a variety of sizes of this type of shoe and other items required for piping on their projects. Piping Technology furnishes all types of pipe supports including PTFE, 25% glass filled, and graphite slide plates, anchors and insulated pipe shoes.

Want to learn more about pipe shoes? Learn more from one of our previous webinars!

Access-Our-Webinar-Archives

Read More

Tension (Pigtail) Spring Supports

November 19, 1993
Tension (Pigtail) Spring Supports
Tension (Pigtail) Spring Supports

This picture above shows tension springs being prepared to support furnace tubes in a refinery reformer. The bottom picture shows one of the five springs the customer specified have a displacement scale attached, so operators can observe the inches of movement when the spring is expanded. These springs were part of a package of materials prepared for shipment to an overseas site by Piping Technology & Products, Inc. of Houston, TX. Our customers use spring coils to support loads from a few pounds to 100,000 pounds so they come in many sizes.

Learn more about the various spring supports we have by visiting our webinar archive page!

Access-Our-Webinar-Archives

Read More

Flue Gas Duct Damper

Flue Gas Duct Damper
Flue Gas Duct Damper

The picture above shows a flue gas duct damper fabricated using Inconel for certain components by the Sweco Fab division of Piping Technology & Products, Inc. Two of these dampers were shipped to Trinidad for installation above the furnaces of an ammonia plant. They have a special refractory lining to withstand the high temperatures of the flue gases. The picture at the left show the linkage of the damper to the motor-driven control system. Each unit weighs approximately 2300 lb. and the openings are approximately 12 feet by 6 feet.

Need a duct damper for a future project? Let us price one for you today.

Request-A-Quote

Read More

Tanks Mounted on Trucks

November 12, 1993
Tanks Mounted On Trucks
Tanks Mounted on Trucks

The picture above show the replacement of a tank mounted on a truck by the Sweco Fab division of Piping Technology & Products, Inc. In this case the customer delivered the damaged tank to our site so measurements of the mounting could be obtained. The old tank (upper left) was damaged beyond repair when a vacuum was inadvertently created inside the tank.

Do you require a tank or vessel for an upcoming project? Let us price it for you today!

Request-A-Quote

Read More

PT&P Aids in the Construction of a New Petro-Chemical Facility

November 7, 1993
Pt&Amp;P Aids In The Construction Of A New Petro-Chemical Facility
PT&P Aids in the Construction of a New Petro-Chemical Facility

The photograph above shows construction site of a new petro-chemical facility near Houston, Texas. Pipe supports supplied by Piping Technology & Products, Inc., including variable spring supports, are shown in the foreground. Piping Technology & Products, Inc. fabricates expansion joints, hot and cold shoes and other items to specification for the piping industry.

Piping Technologies & Products, Inc. has a highly qualified engineering staff to meet the most critical requirements of the industry.

Need pipe supports for your new facility? Allow us to price them for you!

Request-A-Quote

Read More
Top