Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
April — 2009 — The Pipe Supports Blog
Archive for April, 2009

126″ Long Sway Braces for a Power Plant

April 22nd, 2009 No comments
126" Long Sway Braces for a Power Plant

126" Long Sway Braces for a Power Plant

126" Long Sway Braces for a Power Plant

Sway Braces

These PT&P sway braces are fabricated from carbon steel and measure 126″ from pin to pin. They use an integral piston assembly with guide to eliminate any buckling and/or misalignment during extension and compression. The sway braces are designed for 10 1/2″ of travel and a load of 1,500 lb. A combination of standard spring coils is used to achieve the required spring rate of 150 lb./in.

Prior to shipment, a test was performed using a hydraulic ram. This test simulated actual field conditions and allowed the sway brace to move through the entire travel range in both compression and extension modes.

Want to learn more about sway braces? Watch a shock & vibration control webinar now!
access-our-webinar-archives

C-Type Constant with Special Lugs for a Power Plant

April 8th, 2009 No comments

 

 

C-Type Constant with Special Lugs

C-Type Constant with Special Lugs

This PT&P 100 C-Type constant spring support was designed in conjunction with special lugs to fit inside of a trolley. The lugs will provide for movement up and down, as well as extensive horizontal movement. This constant was fabricated entirely from A-36 carbon steel with a hot-dipped galvanize finish. The constant measures 16″ wide x 25″ long x 56″ high. It is designed to carry 16,164 lb. of piping load with a travel of 3 1/2″ downward. The lugs will fit within a trolley by a single pin connection. This configuration will prevent swinging by maintaining the constant in an upright position, which will ensure proper functionality and eliminate any load deviation.

Do you require constants for an upcoming project? Get pricing today!
request-a-quote

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy