Piping Technology and Products Logo

Piping Technology & Products

  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
December — 2012 — The Pipe Supports Blog
Archive for December, 2012

Adjustable Pipe Saddle Supports Designed for 12″ to 14″ Dia. Pipe Sizes

December 31st, 2012 Comments off

Adjustable Pipe Saddle Supports Designed for 12" to 14" Dia. Pipe Sizes

These Fig. 46 adjustable pipe saddle supports are designed for pipe sizes 12” to 14” diameter for an oil refinery. They are fabricated from carbon steel and are capable of supporting up to a 4,920 lb. load. A total of twelve supports were fabricated, quality inspected and tested prior to shipment.

Stainless Steel Constant Spring Supports for an Oil Refinery in the Virgin Islands

December 17th, 2012 Comments off

Stainless Steel Constant Spring Supports for an Oil Refinery in the Virgin Islands

PT&P custom designed  C-type constant spring supports for an oil refinery in the Virgin Islands. They are fabricated entirely from 304 stainless steel to support piping in a highly corrosive environment. The design loads are 7,000 lb., 9,500 lb., and 11,000 lb. with movements of 2-1/2″ and 3″. The constants measure 29″ L x 22″ W x 20″ H. Standard load and travel testing was conducted prior to shipment.

New Webinar: Pipe Supports for Beginners- Constants & Variables

December 6th, 2012 Comments off

View the recording at: http://info.pipingtech.com/webinar-beginners/

This webinar series was created to explain the basic principles of different types of pipe supports in the simplest way possible. It is geared towards “non-engineers” who want to have a better understanding of pipe supports. This particular presentation will give you a brief introduction to pipe supports and will then solely concentrate on constant and variable spring supports. It will explain the various designs, applications, and details of each support using simple terms and a lot of visual aids. The presentation will conclude with general guidelines of the maintenance and ordering process of constants and variables.

PTFE Slide Plates Designed for a Refinery in Louisiana

December 1st, 2012 Comments off

PTFE Slide Plates

These slide plate assemblies are comprised of 3/32″ thick PTFE, 25% glass filled slide plates bonded to 1/4″ thick hot dipped galvanized carbon steel backing plates. They measure 139″ long by 11-1/2″ wide, and were designed for a pressure of 2000 psi at -320°F to 500°F. PTFE, 25% glass filled material provides a low coefficient of friction, is easy to install, does not require surface treatments, or grouting, and is unaffected by weather conditions. These type of slide plates are typically installed on top of a concrete pillar under a large vessel.

Categories: Slide Plates Tags: ,

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy