Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Mechanical Snubbers for a Refinery in Oklahoma — The Pipe Supports Blog
Home > Shock Control, Restraint & Support Devices > Mechanical Snubbers for a Refinery in Oklahoma

Mechanical Snubbers for a Refinery in Oklahoma

May 5th, 2017

Mechanical Snubbers for a Refinery in Oklahoma

Type: Mechanical Snubbers
Size: Size MSA-10, 36″ OAL, and 30 1/2″ Pin-To-Pin
Material: Carbon Steel with HDG Finish
Design: Operating load of 15,000 lbs and a 6″ Maximum Stroke
Testing: Standard Load Tests

Piping Technology & Products supplied these mechanical snubbers with two end brackets, fabricated from carbon steel with an HDG finish for a refinery in Oklahoma. They are size MSA-10, 36″ OAL, and 30 1/2″ pin-to-pin. The snubbers are designed for an operating load of 15,000 lbs and have a 6″ maximum stroke. Standard load tests were performed prior to shipment. Mechanical snubbers have two modes of operation. In passive mode, i.e., motion caused by thermal loads, the resisting mechanism is disengaged and the snubber “free wheels” with very low resistance. In active mode the mechanism is engaged, and the snubber limits the acceleration to a low threshold value.

Comments are closed.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy