Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Ray — The Pipe Supports Blog
Author Archive

Variable Spring Hanger and Pipe Clamp Assemblies Designed for a Cogeneration Plant in Canada

January 27th, 2013 Comments off

Variable Spring Hanger and Pipe Clamp Assemblies Designed for a Cogeneration Plant in Canada

These variable spring hanger and pipe clamp assemblies were custom designed for pipes ranging from 6″ to 20″ diameters at a co-generation plant in Canada. The spring can, threaded rods, weldless eyenuts, welded beam attachments and Fig. 80 pipe clamps were fabricated from hot-dipped galvanized carbon steel. The assemblies are capable of an overall load of 10,790 lb. with a total travel of 1/2″. A total of 21 spring hanger and clamp assemblies underwent standard load and travel testing.

Adjustable Pipe Saddle Supports Designed for 12″ to 14″ Dia. Pipe Sizes

December 31st, 2012 Comments off

Adjustable Pipe Saddle Supports Designed for 12" to 14" Dia. Pipe Sizes

These Fig. 46 adjustable pipe saddle supports are designed for pipe sizes 12” to 14” diameter for an oil refinery. They are fabricated from carbon steel and are capable of supporting up to a 4,920 lb. load. A total of twelve supports were fabricated, quality inspected and tested prior to shipment.

Stainless Steel Constant Spring Supports for an Oil Refinery in the Virgin Islands

December 17th, 2012 Comments off

Stainless Steel Constant Spring Supports for an Oil Refinery in the Virgin Islands

PT&P custom designed  C-type constant spring supports for an oil refinery in the Virgin Islands. They are fabricated entirely from 304 stainless steel to support piping in a highly corrosive environment. The design loads are 7,000 lb., 9,500 lb., and 11,000 lb. with movements of 2-1/2″ and 3″. The constants measure 29″ L x 22″ W x 20″ H. Standard load and travel testing was conducted prior to shipment.

New Webinar: Pipe Supports for Beginners- Constants & Variables

December 6th, 2012 Comments off

View the recording at: http://info.pipingtech.com/webinar-beginners/

This webinar series was created to explain the basic principles of different types of pipe supports in the simplest way possible. It is geared towards “non-engineers” who want to have a better understanding of pipe supports. This particular presentation will give you a brief introduction to pipe supports and will then solely concentrate on constant and variable spring supports. It will explain the various designs, applications, and details of each support using simple terms and a lot of visual aids. The presentation will conclude with general guidelines of the maintenance and ordering process of constants and variables.

PTFE Slide Plates Designed for a Refinery in Louisiana

December 1st, 2012 Comments off

PTFE Slide Plates

These slide plate assemblies are comprised of 3/32″ thick PTFE, 25% glass filled slide plates bonded to 1/4″ thick hot dipped galvanized carbon steel backing plates. They measure 139″ long by 11-1/2″ wide, and were designed for a pressure of 2000 psi at -320°F to 500°F. PTFE, 25% glass filled material provides a low coefficient of friction, is easy to install, does not require surface treatments, or grouting, and is unaffected by weather conditions. These type of slide plates are typically installed on top of a concrete pillar under a large vessel.

Categories: Slide Plates Tags: ,

Cryogenic and Axial Stop Cold Shoes for an LNG Facility

November 18th, 2012 Comments off


Piping Technology and Products supplied these cryogenic and axial stop cold shoes for an LNG facility in Australia. A total of 28 assemblies were fabricated with carbon steel, stainless steel and Micarta® G-10 insulation blocks. They were a wide range of lengths from 24″ to 36″, widths from 6 3/4″ to 30″ and heights from 9″ to 10 1/4″. The pipe shoes will support pipes ranging in diameter from 6″ to 48″ NPS in cryogenic temperatures as low as -162°C. A special paint system was used for the carbon steel components to resist rust. PMI testing was performed on the stainless parts prior to shipping.

Over 40 Constant Spring Supports Designed to Support Production Pipes

November 12th, 2012 Comments off

Fig. 200 U-Type Constant Spring Support

Over 40 constant spring supports were custom designed to support production pipes in an oil refinery. This picture shows a Fig. 200 U-Type constant spring support.

Fig. 100 B-Type Constant Spring Support

This picture shows a Fig. 100 B-Type constant spring support.

The constants range in size from 22″ to 30″ in height, 35″ to 85″ in length, and 12″ to 31″ in width. Their load capacities range from 1,800 lb. to 20,800 lb. with a vertical movement ranging from 7″ to 11-1/2″. All constants were fabricated from A-36 carbon steel and painted with a 3-coat paint system. Each constant went through standard load and travel testing per MSS Standards prior to shipment.

Variable Spring Hanger and Structural Steel Assembly for a Solar Electric Generating System

October 28th, 2012 Comments off

Variable Spring HangersVariable Spring Hanger and Structural Steel Assembly

These variable spring hangers were designed for a 10″ pipe line in a solar electric generating system. All assemblies were fabricated from A-36 carbon steel with a hot-dipped galvanize finish. The picture on the left shows a structural steel assembly supporting a PTP-1 variable spring and a Fig.80 heavy 3-bolt clamp designed for a 3,789 lb. load. The picture on the right shows two PTP-2 variable spring hangers welded to a structural steel beam designed for a 675 lb. load. Each pipe hanger assembly went through standard load and travel testing prior to shipping.

200 E-Type Horizontal Constant Spring Supports for a Fired Heater Radiant Manifold

October 15th, 2012 Comments off

200 E-Type Horizontal Constant Spring Supports for a Fired Heater Radiant Manifold

These 200 E-Type horizontal constant spring supports are fabricated from A-36 carbon steel with a hot-dipped galvanize finish. The pins made for constants operation are A-322-4140 high strength carbon steel. The constants range in size from 22-3/4″ to 26-1/4″ heights, 60″ to 90″ lengths, 18″ width, and 19-1/2″ to 23-1/2″ in coil housing diameters. They are designed for 23,160 lb. to 33,700 lb. loads and 6-1/2″ to 14″ of total travel. A total of sixteen assemblies were custom designed for a fired heater radiant manifold. Each pipe hanger assembly went through standard load and travel testing prior to shipping.

274 Custom Hot Pipe Shoes Rush Delivered in Three Weeks

August 27th, 2012 Comments off

3 Week Turnaround on 274 Custom Designed Hot Shoes

We provided a quantity of 274 custom designed hot shoes on an expedited basis to a factory in Arizona. While the normal delivery time on a typical order might be 6-8 weeks, Piping Technology provided these pipe shoes on a 3 week delivery time. The high temperature pipe supports include clamping material fabricated from carbon steel with a red oxide finish, a polyethylene slide base with stainless steel slide plates, high density calcium silicate insulation and an overlapping galvanized sheet metal jacket. The pipe shoes are designed to accommodate 4″-8″ pipes and have an insulation thickness of 2″-3″ and the base measures 11″ to 14″ in width, and 6″ to 15″ in length. The hot shoes are designed for temperatures ranging from 40° F to 600° F. The insulation for these supports is a combination of high density calcium silicate with high strength inserts.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy