Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Constant Spring Supports Designed for a Steam Methane Reformer

May 10th, 2015 Comments off

Constant Spring Supports Designed for a Steam Methane Reformer
PT&P manufactured Fig. PTP 100-E constant spring supports for a steam methane reformer plant project in Thailand. The constant springs are designed for a pipe operating temperature from 650°F to 1250°F and an operating load of 3,355 lb. with a movement of 13″ upward. The constants are fabricated from carbon steel and painted with an epoxy for high temperatures. Standard load and travel test were completed prior to shipment.

G-Type Variable Spring Supports Designed for a Coker Replacement Project

April 12th, 2015 Comments off

G-Type Variable Spring Supports Designed for a Coker Replacement Project

PT&P fabricated PTP-6 G-type variable spring supports for a coker replacement project in Kansas. The variables are comprised of two standard spring housing joined together with an intermediate bridge assembly. The bridge assembly is customized to match existing site conditions which allows for use in applications with limited space or interferences. They are 50″ in length, designed for an operating load of 15,000 lb. and fabricated from carbon steel with a hot-dipped galvanized finish. All variable assemblies underwent standard load and spring testing prior to shipment.

Custom Designed Upthrust Constant Spring Supports

March 20th, 2015 Comments off

Custom Designed Upthrust Constant Spring Supports

PT&P designed Fig. PTP 200-U upthrust constant spring supports modified to accommodate an increased installed height. PT&P fabricated these constant assemblies from A36 carbon steel. They were designed for temperatures up to 185°F, and a load of 15,737 lb. The constants are capable of a downward total travel of 2″ and are 61″ L x 25″ W x 39″ H. Standard load and travel tests were conducted prior to shipment.

Pipe Support Field Inspection, Installation & Maintenance Webinar

March 12th, 2015 Comments off

This webinar is over, view the recording at: http://info.pipingtech.com/field-services-webinars/

Field Service Technician Inspecting a Hydraulic SnubberThis Webinar will focus on installation and maintenance guidelines and offer valuable tips on inspecting a wide variety of pipe supports and expansion joints in your piping system. We will cover various pipe support applications and point out signs that indicate if a particular support needs replaced or adjusted. Obtain the knowledge you need to avoid the possibility of a potentially catastrophic situation. View examples of real world problems and see how we were able to solve them with timely and cost effective solutions.

14 Foot Long Sway Struts Custom Designed for a Natural Gas Facility in Canada

March 8th, 2015 Comments off

14 Foot Long Sway Struts Custom Designed for a Gas Facility in Canada

PT&P custom designed sway struts for a pipeline in a natural gas facility located in Canada. The sway struts are fabricated from carbon steel and include a painted finish for corrosion protection. The lengths range from 106″ to 173″. They are capable of supporting loads up to 8,000 lb. and are designed to restrain movement in one direction while providing movement due to thermal expansion or contraction in another direction.

54″ Dia. Pre-Insulated Pipe Shoes Custom Designed for a Pipeline in Texas

February 21st, 2015 Comments off

54

Pipe Shields/PT&P designed and manufactured pre-insulated pipe shoes for a 54″ diameter pipeline in a chemical processing plant in Texas. The hot shoes are custom designed with a wide base to accommodate lateral movement and axial movements of +/- 4 1/2″. We designed the hot shoes to include additional bolting along with bolting torque recommendations order to help prevent slippage of the pipe inside the pipe shoe. We designed the supports to accommodate vertical loads up to 22,200 lb. and temperatures up to 1800°F. The outer part of the shoe was manufactured of hot-dipped galvanized carbon steel while the inner insulation material is 4″ thick high density calcium silicate insulation.

F-Type Variable Spring Supports Designed for an LNG Facility

February 8th, 2015 Comments off

F-Type Variable Spring Supports Designed for an LNG Facility

PT&P manufactured F-type variable spring supports for an LNG facility in Colorado. The variables installed heights range from 10-5/8″ to 21-1/16″. The F-Type pipe hanger assembly is used to support the pipe from below and are typically mounted to concrete pads via anchor bolts or welded to structural steel. The various springs shown are designed for operating conditions ranging from loads of 633 lb. to 6510 lb. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.

Heavy Duty Yoke U-Bolt Pipe Clamps Designed for a Pipeline in Canada

January 24th, 2015 Comments off

Heavy Duty Yoke U-Bolt Pipe Clamps Designed for a Pipeline in Canada

These custom heavy duty Fig. 43 yoke u-bolt pipe clamps are designed for a pipeline in Canada. The yoke clamps are designed for 42″ diameter pipe sizes and are fabricated from hot-dipped galvanized carbon steel. They are designed to support a load of 27,500 lb. PT&P supplied a total of 28 assemblies in three weeks for this project. These yoke clamps went through finite element analysis and performance tests prior to shipment.

108″ Dia. Storage Tank and Containment Tank Designed for a Chemical Plant in Texas

January 11th, 2015 Comments off

108

Sweco Fab., a division of PT&P, designed and fabricated this 108″ diameter storage tank that will be submerged inside a containment tank for a chemical plant in Texas. The storage tank is fabricated from 1/2″ thick SA516-70 carbon steel and is 240″ in length. The containment water tank measures 295″ L x 124″ W x 128″ H. The storage tank is designed for 100 PSIG at 130°F internally and 15 PSIG at 130°F externally. The storage tank was hydro tested for 1 hour at 150 PSI and a full radiography test was done prior to shipment.

Over 8,000 Instrument Stands Designed for an LNG Facility

December 22nd, 2014 Comments off

Instrument Stands Designed to Mount Instrument Panels in an LNG Facility

PT&P manufactured custom instrument stands designed to mount instrument panels in an LNG facility located in Australia. We are supplying 8,000 assemblies fabricated from carbon steel with a hot-dipped galvanized finish. The average size measures 68″ in length, 22″ in width and 82″ in height. Total weight to be shipped is over 800,000 pounds. All assemblies underwent quality control inspection prior to shipment.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy