Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

F-type Variable Spring Supports Designed for a Petroleum Facility

May 16th, 2014 Comments off

F-type Variable Spring Supports For Petroleum Facility

PT&P designs thirty F-type variables spring supports for a petroleum facility in Canada. The springs are fabricated from carbon steel and with a hot-dipped galvanized finish. The assemblies are internally guided and have a 3,455 lb. operating load. A standard travel test was conducted on the variables prior to shipment.

New Customer Portal to Track Your Jobs

May 5th, 2014 Comments off

Customer Portal Progress Graphs

  • View when your order was entered into the Customer Portal
  • See when it was sent to the shop
  • Look over the line item details of your order
  • Check when your order has been shipped
  • Access your carrier and tracking information
  • Download Bill of Materials and scanned shipping documents for any shipment
  • Export your information into a .CSV file
  • See the “shop progress” graphs that show which operations are completed

 

Preview of the Customer Portal Interface

View more information at: http://www.pipingtech.com/technical/portal.html

1,328 Hold-Down Pipe Clamp Supports Designed for Insulated Pulsating Gas Pipelines

April 20th, 2014 Comments off

1,328 Hold-Down Pipe Clamp Supports Designed for Insulated Pulsating Gas Pipelines

PT&P fabricated 1,328 hold-down pipe clamp assemblies for insulated pulsating gas pipelines. They are fabricated from carbon steel and designed with PTFE slide plates and kinetics-vibroisolating pads. The hold-downs are designed for 2″ to 8″ diameter pipes and operating temperatures ranging from -20°F to 750°F.

G-Type Variable Spring Supports Designed for a Paper Manufacturing Plant

April 5th, 2014 Comments off

G-Type Variable Spring Supports Designed for a Paper Manufacturing Plant

PT&P designed G-Type variable spring supports for a paper manufacturing plant in Minnesota. The variables are comprised of two standard spring housing coil subassemblies joined together with an intermediate bridge assembly. The bridge assembly is customized to match existing site conditions which allows for use in applications with limited space or interferences. The variables are fabricated from carbon steel with a hot-dipped galvanized finish. The assemblies were designed for a total operating load of 1,348 lb. with an upward design travel of 0.8013″. Each assembly underwent a standard load test prior to shipment.

U-Type Constant Spring Supports Designed to Support Ducts in an Acid Plant

March 23rd, 2014 Comments off

U-Type Constant Spring Supports Designed to Support Ducts in an Acid Plant

U-Type constant spring supports were designed to support ducts in an acid plant. The constants are fabricated from carbon steel, galvanized and painted for extra protection against corrosion. The U-type constants are designed to support piping from below. The base plate is 25-7/8″ wide and bolted directly to the top of the steel or floor. The assemblies measure 84″ in length and 22-1/2″ in height. They only have vertical movement subjected by 6-1/2″ total upwards travel and are capable of supporting a 13,489 lb. load. The constants underwent standard spring testing prior to shipment.

Variable Spring Supports Designed for a Coker Unit in an Oil Refinery

March 8th, 2014 Comments off

Variable Spring Supports Designed for a Coker Unit in an Oil Refinery

PT&P designed and fabricated D-type variable spring supports for a coker unit in an oil refinery in the UAE. The variables are designed for a special pipe diameter of 4-3/4″. The cans are fabricated from electro-galvanized carbon steel, and the springs are coated with an electrophoretic epoxy coating. The variable springs are designed for 2.79″ of upwards movement, 300 lb. at 81°F. Standard load test and a spring rate test was performed prior to shipment.

Pig Launchers and Receivers Designed for a Crude Export Pipeline

February 21st, 2014 Comments off

Pig Launchers and Receivers Designed for a Crude Export Pipeline

Sweco Fab., Inc. designed and fabricated pig launchers and receivers with closure for a crude export pipeline in Mexico. These units were custom designed per ASME CODE B31.3 and weigh 2,400 lb. They are 120″ in length and have 12″ dia. minor barrels and 18″ dia. major barrels. The barrels are fabricated from API 5L Gr. B pipe, the flanges from SA105 and the closures from carbon steel. The launchers are designed for operating temperatures that vary from -20°F to 212°F at 943 psig. They were radiography tested and hydro-tested at 1,415 psig for two hours.

Adjustable Pipe Saddle Supports Designed for a Hydrocracker Project

February 9th, 2014 Comments off

Adjustable Pipe Saddle Supports Designed for a Hydrocracker Project

PT&P supplied sixty-nine adjustable pipe saddle supports for a hydrocracker project in an oil refinery. The supports will be installed under a trunnion and range in heights from 12″ to 48″. They have 8″ diameter top plates, and are designed to support pipes from 2″ to 8″ in diameter. The supports are fabricated from carbon steel and consist of schedule 40 and 80 pipes and concentric reducers. The operating temperature for these custom designed saddle supports is 750″F. Each assembly was inspected by Q.C. prior to shipment.

G Type Constant Spring Supports Designed for a Power Plant in Mississippi

January 23rd, 2014 Comments off

G Type Constant Spring Supports Designed for a Power Plant in Mississippi

PT&P custom designed 16 G type constant spring supports for a power plant in Mississippi. The constants are comprised of two standard constant spring housing sub-assemblies joined together with an intermediate bridge assembly. They also include welded beam attachments, rods and hex nuts. The assemblies are designed to support pipes ranging from 80″ – 96″ in diameter. Standard load and travel tests were performed prior to shipment.

Insulated Pipe Supports Designed for 6″ Dia. Cold Temperature Piping

January 11th, 2014 Comments off

Insulated Pipe Supports Designed for 6

These insulated pipe supports are designed for 6″ diameter cold temperature piping for a gas refinery in Texas. They are fabricated with a carbon steel shell and 5″ thick polyurethane insulation. PT&P offers various types of insulated supports utilizing insulating materials designed for piping ranging in surface temperatures from -460°F to 1,200°F.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy