Horizontal U-Type Constants for Power Plant
Finished Products Ready for Shipment
The constants measure 61 x 17 x 40 and weighs 560 lbs. a piece. They are designed to operate in temperatures from -40° F to 660° F. The unique construction of the constants permits extensive vertical travel, ranging from 20.5 to 26. Standard load and adjustment testing was performed to ensure quality prior to shipping.
Do you require u-type constants in your piping system? Let us price them for you!
Long Tangent U-Bolts for Refinery
Piping Technology & Products, Inc. recently custom designed and fabricated eight long tangent U-bolts for an oil refinery in Texas. The carbon steel U-bolts can support pipes ranging from 8” to 16”. They are designed to support loads up to 9,900 lbs. and temperatures to 650° F. The products weigh between 3 lbs. and 9 lbs. U-bolts are recommended to support or guide heavy loads. They are often employed in power and process plants, as well as in marine service.
Do you see a need for u-bolts in your plant or refinery? Get pricing today!
Custom Variable Boiler Spring Assemblies
Piping Technology & Products, Inc. recently custom designed and fabricated 63 variable spring assemblies used to support a boiler in a power plant. Three sets of custom springs were designed for this project. The first group measures 14 x 14 x 17 1/8 and can support 45,000 lbs. per inch. The next group can support up to 28,000 lbs. per inch and measures 16 x 16 x 17 11/16. The third group measures 15 x 15 x 17 9/16 and can support 38,000 lbs. per inch. The coils in the assembly are made from 2 15/16 diameter coil with 2 3/4 or 3 active coils.
The variable spring assemblies are carbon steel with an inorganic zinc primer finish. The spring coils are A4161-H material with a neoprene exterior coating. Each spring coil was tested to insure the wire diameter, coil height and spring rates met customer specifications.
Do you require custom variable spring assemblies like those described above? Get pricing today!
Vertical Constant Supports for a Refinery
Piping Technology & Products, Inc. custom designed and manufactured eight Type F vertical constant supports for a refinery in Ohio. The constants are capable of supporting 2,000 to 3,500 lbs. and have a maximum travel of 5. They are constructed of carbon steel and each weighs 270 lbs. Standard load and adjustment testing was performed to ensure quality prior to shipping.
Do you have a need for constant spring supports in your plant or refinery? Get pricing today!
Constants that Support up to 38,800 lbs.
PTP-100 Type C Constant
Piping Technology & Products, Inc. custom designed and manufactured four PTP-100 Type G constants and three PTP-100 Type C constants for a power station in Missouri. The PTP-100 Type C constants are designed for operating loads of 8,300 lbs. to 25,200 lbs. and have a travel range of 2.5 to 3.5. These constants are fabricated from A36 carbon steel with dimensions ranging from 66×18 to 88×20.
The PTP-100 Type G constants are designed for operating loads ranging from 2,800 lbs. to 38,800 lb. and a travel range of 2.5 to 3.5. They are fabricated out of A36 carbon steel with dimensions ranging from 75×26.5 to 95×50. Standard load and adjustment testing was performed to ensure quality prior to shipping.
Do you require constant spring supports in your piping system? Get pricing now!
Transition Piece for Olefin Site at Chocolate Bayou
Transition Piece in Progress
Sweco Fab, Inc. recently designed and manufactured a 1,900 lb. transition piece for an olefin site at Chocolate Bayou on the Texas Gulf Coast. The product transitions from round to oval and is made of 36″ half pipe construction. The piece measures 36″ x 72″ x 60″ and is constructed of carbon steel. The transition piece will be used to regulate the flow of both air and liquid. Prior to shipping the product was hydrotested to guarantee quality.
Do you require a transition piece in your piping system? Get pricing now!
46 Constants for Hydrogen Reformer
Piping Technology & Products, Inc. custom designed and manufactured 46 PTP 100-C size 50 constants for a hydrogen reformer in Chile. The constants measure 30 x 48, designed for a vertical travel range of 11 and an operating load capacity of 2,600 lbs. They are fabricated out of A36 carbon steel. To ensure quality, standard load and travel tests were performed prior to shipping.
Want to learn more about constants? Instantly view a constant webinar now!
Adjustable Base Supports and Flanged Trunnions for Cold Piping
Adjustable Base Supports and Flanged Trunnions for Cold Piping
Piping Technology & Products Inc., recently designed and fabricated 87 base supports and flanged trunnions for cold piping to be used in Equatorial Guinea. The products were designed according to customer specifications and the pipes range in size from 3″ to 24″. The base supports and trunnions were fabricated from micarta and A36 carbon steel.
Do you require adjustable base supports like those described above? Get pricing today!
Structural Frame Posts for Power Plant
Piping Technology & Products, Inc. recently custom designed and fabricated an 11′ x 11′ x 11′ six structural frame for a power plant in California.
Each post of the frame measures 11′x11′x11′ with knee braces 15′ long at 45º to the vertical post. The structure is made of carbon steel and includes W6X15 beams. The frame supports 24′ auxiliary cooling water lines and can sustain vertical operating loads of up to 13,500 lbs. This structure is also designed to withstand a seismic loading factor of .49 in all directions.
Do you see a need for structural frame posts in your plant? Get pricing today!
70,000 lb. Load Constants for Power Plant
These constants are designed for a vertical travel range of 8.5 and an operating load capacity of 70,000 lbs. They are fabricated out of A36 carbon steel with dimensions of 45×80. Prior to shipping, standard load and travel tests were performed to ensure product quality.
Do you require constant springs in your piping system? Let us price them for you now!
