Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Custom U-Type Constant for an Oil Refinery

July 13th, 2010 No comments

U-Type Constant Spring Support for an Oil Refinery

This custom designed carbon steel constant measures 19 5/8″ wide, by 59 1/2″ tall, by 52 1/8″ long. It is designed for a 500 lb. load with a total travel of 17 1/2″. The support frame was increased in height to meet a large take-off of 59 1/2″. The constant spring will be used to support piping in an oil refinery.

Do you have a need for custom constant springs? Let us price them for you today!
request-a-quote

Custom Sway Braces with Ball Joints for a Refinery

July 6th, 2010 No comments
Custom Sway Braces with Ball Joints for a Refinery

Custom Sway Braces with Ball Joints for a Refinery

28 sway braces were custom designed from a combination of carbon steel and A-5160 spring steel. Custom design and fabrication was required due to the design loads and movements exceeding the largest standard sway brace assembly. The application required ball joint ends because the angle of incline exceeded the maximum five degree angle. The largest of the sway braces was designed for an operating load of 10,000 lb. with a travel range of 5″ in either compression or extension. Each sway brace was load and travel tested prior to shipping to ensure functionality throughout the entire travel range.

Do you require custom or standard sway braces in your plant? Get pricing today!
request-a-quote

399 Pre-Insulated Pipe Supports for a LNG Facility

June 29th, 2010 No comments
Pre-Insulated Pipe Supports for 56" pipe size

Pre-Insulated Pipe Supports for 56" pipe size

Piping Technology & Products, Inc manufactured the pre-insulated supports with 4″ of insulation thickness for pipe sizes ranging from 36″ to 56″ in diameter.

Pre-Insulated Pipe Supports for 36" pipe size

Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!
access-our-webinar-archives


Custom U-Type Constant Spring Supports with Slide Plates

June 15th, 2010 No comments
Custom U-Type Constant Spring Supports with Slide Plates

Custom U-Type Constant Spring Supports with Slide Plates

PT&P fabricated 12 constant spring supports of various sizes with PTFE, 25% glass filled slide plates. The smallest constant is 38.25″ length x 13″ width x 28″ height, and the largest is 52″ length x 19″ width x 28″ height. The designed loads vary from 13,264 lb. to 15,962 lb. and the total travel range is 2″ to 3″.

Do you require constants or slide plates in your piping system? Get a quote today!

request-a-quote

Custom Constant Spring Hangers and Pipe Clamps

June 8th, 2010 No comments
Custom Constant Spring Hangers and Pipe Clamps

Custom Constant Spring Hangers and Pipe Clamps

The constant spring hangers are manufactured from A36 carbon steel and have custom 4-bolt pipe clamps due to heavy loads. The dimensions are 40″ length x 18″ width x 85″ height and are designed for a 1,784 lb. load with 10″ of travel. The constants will be used to support radiant inlet manifolds and have a unique paint applied due to the highly corrosive condition. The entire pipe hanger assembly went through load and travel testing prior to shipping.

Want to learn more about constant springs? Instantly view a past constant webinar!
access-our-webinar-archives

Pre-Insulated Pipe Supports for an LNG Plant

June 1st, 2010 No comments
Pre-Insulated Pipe Supports for an LNG Plant

Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12″ to 36″ in diameter. The 36″ diameter shoes are designed for a vertical load of 102,000 lb. and the 12″ diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!
request-a-quote

Big Ton Springs with a Custom 3-Coat Paint System

May 18th, 2010 No comments
Big Ton Springs with a Custom 3-Coat Paint System

Big Ton Springs with a Custom 3-Coat Paint System

PT&P fabricated big ton spring supports for an expedited delivery of six weeks from conceptual design to final delivery. The big tons measure 26″ long x 26″ deep x 34-5/8″ tall and will be used to support substantial vertical loads while simultaneously providing a base support structure. They are designed for operating loads of 36,000 lb. with a travel of .5625″ down.

Due to the harsh and corrosive environment, the exposed metal surfaces were finished with a three-coat urethane paint while the threaded components were cadmium plated with a blue Fluorocarbon coating. The big tons were also salt water spray tested according to ASTM B117 standards, and load tested to verify the springs’ functionality throughout the entire travel range.

Do you need big ton springs for your piping system? Get pricing today!
request-a-quote

643 Instrument Stands for an Oil Refinery

May 12th, 2010 No comments
643 Instrument Stands

643 Instrument Stands

PT&P manufactured instrument stands from hot dipped galvanized carbon steel. The instrument stands are 52″ in height and have varying widths from 1 to 4′. They will be used to support instruments in a new Coker unit that is part of an oil refinery in Illinois.

Need some instrument stands to support the instruments in your plant? Get pricing now!
request-a-quote

F-Type Variable Springs with Slide Plates

May 4th, 2010 No comments
F-Type Variable Springs with Slide Plates

F-Type Variable Springs with Slide Plates

PT&P fabricated variable springs from hot-dipped galvanized carbon steel components and a neoprene coated spring steel coil. P.T.F.E. slide plates are welded to the load flange to reduce frictional forces generated during lateral movement of the supported pipe. Internal guides are also installed to help maintain vertical alignment of all moving components throughout the anticipated thermal deflection cycle. The installed (cold) load is set to 10,413 lb. With a design travel of 0.720” up, the final operating (hot) load will be 8,974 lb. Each spring is equipped with travel stops and went through load testing prior to shipping.

Want to learn more about variable springs? Instantly view a past variables webinar!

access-our-webinar-archives

PT&P Releases a New Pipe Supports Catalog

April 29th, 2010 No comments

Pipe Supports Catalog – PT&P

Check out the new drawings and data tables, detailed ordering instructions, new product additions and improved pictorial index.

PT&P's New Pipe Supports Catalog

PT&P's New Pipe Supports Catalog

View more documents from Piping Technology & Products, Inc..

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy