Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Congratulations to Joel from Chevron who won a Kodak C190 12MP Digital Camera from PT&P at the ASME Maintenance Trade Show.

April 22nd, 2010 No comments
PT&P Booth at the ASME Plant Engineering, Inspection, and Maintenance Trade Show

PT&P Booth at the ASME Plant Engineering, Inspection, and Maintenance Trade Show

Piping Technology & Products, Inc. attended the 8th annual ASME Plant Engineering, Inspection and Maintenance Trade Show at the Pasadena Convention Center in Pasadena, Texas on Thursday, April 22, 2010.  Joel from Chevron stopped by the PT&P booth and won a Kodak C190 12mp digital camera. Congratulations Joel!

60" Diameter Cold Support for a Thermal Energy Storage Tank

April 20th, 2010 No comments
60" Diameter Cold Support for a Thermal Energy Storage Tank

60" Diameter Cold Support for a Thermal Energy Storage Tank

This cold shoe is manufactured from carbon steel and has 2-1/2″ thick polyurethane insulation. It is designed to support a vertical load of 2700 lb. and can withstand a temperature range from -100°F to 70°F. The cold shoe will be used in a 60″ diameter thermal energy storage tank for power generation.

Want to learn more about cold shoes? Instantly view a past cold shoe webinar!
access-our-webinar-archives

Big Ton Spring Supports with Slide Plates Designed for a Chemical Processing Plant

April 13th, 2010 No comments
Big Ton Spring Supports for a Chemical Processing Plant

Big Ton Spring Supports for a Chemical Processing Plant

A total of 18 big ton springs of various sizes were fabricated from A516 Gr. 70N carbon steel. The big tons were designed in a rectangular configuration in order to match the existing vessel saddle supports and the concrete foundation below the springs. PTFE, 25% glass filled slide plates will be welded on the load flanges to allow horizontal movement in addition to the vertical movements specified. The largest of the big ton assemblies has an operating load of 79,000 lb. with a travel of .706″ down.

Want to learn more about big ton springs? Watch a recording of a spring support webinar now!

access-our-webinar-archives

Custom Vertical Constant Hangers

April 6th, 2010 No comments
Custom Vertical Constant Hangers

Custom Vertical Constant Hangers

PT&P manufactured constant spring supports to custom dimensions of 21″ height x 13″ width x 7.5″ depth. The total travel is 7″, with an actual travel of 3.5″ in both up and down directions. The rated load is 180 lb. and they will be used to support pipe lines for a power plant in Louisiana.

Do you see a need for constant hangers in your plant? Get pricing today!
request-a-quote

Custom Sway Brace Supports

March 30th, 2010 No comments
Custom Sway Brace Supports

Custom Sway Brace Supports

The sway braces will be used in pairs to support a 72″ diameter cooling tower supply line via a common attachment point. The internal components and housing are fabricated from carbon steel, and A-5160 spring steel was used for the coil. Each sway brace has a spring rate of 10,100 lb/in. with an overall available travel of 3″. The adjustable ends are configured so that one end bracket is interlocked with the mating end bracket of its sister sway brace; therefore, enabling them to be connected to the pipe by a single lug.

Do you require sway braces for an upcoming project? Let us price them for you today!
request-a-quote

Instrument Stands for a Heavy Oil Refinery

March 16th, 2010 No comments
Instrument Stands for a Heavy Oil Refinery

Instrument Stands for a Heavy Oil Refinery

PT&P manufactured 55 instrument stands from carbon steel with a hot-dipped galvanize finish. They are 75″ tall and 90″ wide, and will support various instruments and junction boxes in a heavy oil refinery.

Want to learn more about instruments stands? Watch a instant webinar on our miscellaneous fabricated products!
access-our-webinar-archives

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

March 9th, 2010 No comments
Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.

Want to learn more about cold supports? Watch an instant webinar on cold shoes!
access-our-webinar-archives

22" Dia. Riser Clamps for a Power Plant

March 2nd, 2010 No comments
22″ Dia. Riser Clamps

22″ Dia. Riser Clamps

All four riser clamps are manufactured from A-36 carbon steel plates and are coated with red oxide primer for rust prevention. They are 22″ in diameter with each plate measuring 2″ thick by 12″ wide by 65″ long. Each riser clamp is capable of supporting loads of up to 38,000 lb. and will be used in a power plant to support “downcomer” lines.

Do you see a need for riser clamps in your current or upcoming project? Let us price them now!
request-a-quote

72" I.D. Cryogenic Insulated Supports for a Project in Algeria

February 16th, 2010 No comments
72″ I.D. Cryogenic Insulated Supports

72″ I.D. Cryogenic Insulated Supports

PT&P manufactured 72″ dia. insulated supports for temperatures as low as -260°F. The insulation is multi-layered comprised of polyurethane foam with a density of 20 PCF, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel. The shoes will be used to support and insulate piping in a receiving & regassification plant and refinery.

Do you require cryogenic insulated supports in your piping system? Get pricing now!
request-a-quote

Cryogenic Insulated Supports with Acoustic Pads for a Project in Algeria

February 9th, 2010 No comments
Cryogenic Insulated Supports with Acoustic Pads

Cryogenic Insulated Supports with Acoustic Pads

The operating temperature for these cryogenic shoes ranges from -290°F to 90°F. They are designed for 56″ diameter pipe and are capable of supporting loads up to 40,000 lb. The insulation is multi-layered comprised of 20 PCF polyurethane, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel.

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy