Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Transition Piece for an Ammonia Plant

December 12th, 2007 No comments

 

Transition Piece for an Ammonia Plant

Transition Piece for an Ammonia Plant

Transition Piece for an Ammonia Plant

Transition Piece for an Ammonia Plant

SWECO Fab, Inc. designed and fabricated this transition piece for an ammonia plant in Egypt. The bottom rectangular flange measures 159″ long and 60″ wide. The top duct assembly has an outside diameter of 90″. The entire assembly measures 48″ high. The transition piece is fabricated from ASTM A516-70 carbon steel. It is used to connect a circular duct to a rectangular duct.

Want to learn more about the miscellaneous products we fabricate? Watch a Sweco webinar today!


access-our-webinar-archives



36" Cold Shoe Anchors for an LNG plant in Louisiana

November 28th, 2007 No comments
36" Cold Shoe Anchors for an LNG plant in Louisiana

36" Cold Shoe Anchors for an LNG plant in Louisiana

 

36" Cold Shoe Anchors for an LNG plant in Louisiana

36" Cold Shoe Anchors for an LNG plant in Louisiana

These cold shoe anchors are designed to support pipe sizes ranging from 8″ to 36″ in diameter. The measurements of the base plate are between 18″ and 36″ in length and between 8″ and 22″ in width. The saddle is fabricated from stainless steel and the base plate is galvanized steel. Micarta insulation material, between the base plate and the saddle, functions to insulate the extremely cold pipeline. These cold shoe anchors are manufactured for large axial and lateral capacities.

Want to learn more about pre-insulated pipe supports? View a pre-insulated pipe support webinar today!


access-our-webinar-archives



7′- 6" Long Custom Variable Spring Hangers

November 21st, 2007 No comments
7'- 6" Long Custom Variable Spring Hangers

7'- 6" Long Custom Variable Spring Hangers

These variable spring hangers were custom designed per customer specifications for a power plant in Turkey. The pipe hanger assembly measures 7′- 6″ long and the diameter of the can measures 12″. The variable spring hanger is capable of 55,137 lb. of hot load and 63,339 lb. of cold load. The assembly allows for 1″ upward travel.

In order to achieve the required spring rate, PT&P utilized a set of stacked coils (5 5/8″ O.D.) nested inside a larger coil. This produced an overall spring rate of 9,235 lb/in. The upper and lower attachments were minimized to fit within the space requirements provided.

Do you see a need for variable springs in your application? Get pricing today!
request-a-quote


60" Adjustable Pipe Stands for an LNG Plant

November 7th, 2007 No comments

 

60" Adjustable Pipe Stands for an LNG Plant

60" Adjustable Pipe Stands for an LNG Plant

The stands were completed with a hot-dipped galvanize finish. They were also designed with a neoprene lining in the saddle to prevent metal to metal contact in the field. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline. The simplicity of the design allows for easy installation and maintenance of the support.

Do you see a need for adjustable pipe stands in your current or upcoming project? Get pricing today!
request-a-quote


Base Insulated Supports

October 31st, 2007 No comments
Base Insulated Supports

Base Insulated Supports

 

Base Insulated Supports

Base Insulated Supports

PT&P fabricated base insulated supports used to minimize thermal conductivity between the base and un-insulated lines. The support is designed with a carbon steel bottom and a stainless steel upper for cryogenic temperatures of -300°F. The insulation is made of 20 PCF polyurethane block. These supports are designed to handle lateral and axial pipe loads. They also include a wear pad for extra pipe reinforcement, which prevents local deformation of the pipe.

Do you require base insulated supports for project? Let us price them for you today!
request-a-quote


10" Beam Clamp Assemblies for an Electric Plant in West Virginia

October 17th, 2007 No comments
10" Beam Clamp Assemblies for an Electric Plant in West Virginia

10" Beam Clamp Assemblies for an Electric Plant in West Virginia

10" Beam Clamp Assemblies for an Electric Plant in West Virginia

Beam Clamp

These beam clamp assemblies are fabricated from carbon steel with a hot-dipped galvanized finish. The clamp is designed to support a pipe that is 10″ in diameter and is capable of loads up to 3,600 lb. The rod measures 7/8″ in diameter.

The function of the beam clamp assembly is to support the pipe and allow it to swing. The clamp requires no welding which allows for a quick and easy installation.

Do you require beam clamp assemblies in your project? Get pricing today!


request-a-quote


October 2007 News

October 15th, 2007 No comments

PT&P is Now ISO 9001:2000 Certified (October 13, 2007) Piping Technology & Products, Inc. is awarded the ISO 9001:2000 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.

View Benefits of ISO 9001:2000

View ISO 9001:2000 Certificate

ISO 9001;2000

ISO 9001:2000

The latest version of standards, ISO 9001:2000 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.

80" U-Type Constants for a Power Plant

October 10th, 2007 No comments
80" U-Type Constants for a Power Plant

80" U-Type Constants for a Power Plant

- U-Type constant spring supports for a power plant in Thailand
- Fabricated from A36 carbon steel
- Dimensions = 25″W x 28″H x 80″L
- Load = 24,000 lb.
- 3″ of total travel upward
- Standard load and travel testing was performed

Want to learn more about constant springs? Instantly view a constant webinar today.


access-our-webinar-archives



26" Hot Water Expansion Tank for a Compressor Station

September 26th, 2007 No comments

 

 

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26" Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank for a Compressor Station

26″ Hot Water Expansion Tank

- Material: .25″ Thick Carbon Steel
- Design Pressure: 50 PSIG
- Design Temperature: 200 F
- Capacity: 170 Gallons

Do you require a vessel or tank for your current or upcoming job? Get pricing today!
request-a-quote


Categories: Pressure Vessels/Tanks Tags: ,

240" Sway Strut for a Local Refinery

September 19th, 2007 No comments
240" Sway Strut for a Local Refinery

240" Sway Strut for a Local Refinery

This sway strut is fabricated from carbon steel and measures 240″ from pin to pin. The pipe is 6″ in diameter and has a load capability of 15,000 lbs. The components were completed with a hot-dipped galvanize finish and the pipe was coated with a shop primer. The function of a sway strut is to restrain movement of piping in one direction while providing for movement due to thermal expansion or contraction in another direction.

This particular sway strut will support a 30″ process line in a refinery. This type of support is necessary, because the current line has only a few I-beams for support. Additionally, the I-beams that support the line are very high off the ground and not capable of handling the large forces acting on the line. Due to the loads acting upon the pipe and length of the required strut, a heavy schedule pipe and heavier duty strut ends were necessary.

Do you require sway struts in your plant or refinery? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy