Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Adjustable Pipe Stands to Support Ductile Iron Pipe

May 2nd, 2007 No comments

 

Adjustable Pipe Stands to Support Ductile Iron Pipe

Adjustable Pipe Stands to Support Ductile Iron Pipe

Piping Technology & Products, Inc. designed and fabricated adjustable pipe stands to support ductile iron pipe. Due to ductile iron pipes having non-standard diameters, each of the supports were custom fabricated per the customers’ requirements regarding pipe diameter and elevation. All the supports were fabricated from carbon steel with an HDG finish and designed to provide nine inches (+/- 4.50″) of adjustment and each support has an 11″ x 11″ base plate.

(Left) Cradle type supports are designed with an installed height of 84″ from the base to the bottom of pipe (BOP).

(Middle) Flange type supports are designed with an installed height of 81-1/4″ from the base to the BOP.

(Right) Tee type supports are designed for an installed height of 77″ from base to BOP.

They will be used on horizontal piping and will be attached at their base to pre-case concrete pedestals. Each base plate has been pre-drilled to accept anchor bolts provided at the site. The pipe stand’s threaded adjustment column will allow field personnel to adjust the height of each support. They can also accurately place the pipe at the required elevation without using shims or modifying the concrete pedestal.

Do you see a need for adjustable pipe stands in your piping system? Get pricing today!
request-a-quote


U-Type Upthrust Constant Supports

April 25th, 2007 No comments
U-Type Upthrust Constant Supports

U-Type Upthrust Constant Supports

U-Type Upthrust Constant Supports

U-Type Upthrust Constant Supports

These U-type upthrust constant supports are designed to handle 6″ of total travel and loads of 5,677 lb. and 4,956 lb. The load flange is modified to hold six ball transfer units for each support. The ball transfer units are used to decrease the coefficient of friction to 0.05 compared to using the standard PTFE, 25% glass filled, which is 0.15.

U-Type Upthrust Constant Supports

Ball Transfer Units

Gussets are added under the load flange to maintain a leveled surface and an equal load transfer to all ball transfer units. These custom designed constant supports are manufactured for steam power plant superheaters.

Want to learn more about upthrust constants? Instantly view a constant webinar!


access-our-webinar-archives



Pipe Saddles for a Process Plant in Nebraska

April 11th, 2007 No comments
Pipe Saddles for a Process Plant in Nebraska

Pipe Saddles for a Process Plant in Nebraska

Piping Technology & Products, Inc. designed and fabricated pipe saddles for 42″ pipe size. The maximum vertical load is 27,649 lb., axial load is 5,500 lb. and lateral load is 6,040 lb.

Do you see a need for pipe saddles like the one described above? Get pricing today!
request-a-quote


Riser Clamps for a Power Plant in Rhode Island

April 4th, 2007 No comments
Riser Clamps for a Power Plant in Rhode Island

Riser Clamps for a Power Plant in Rhode Island

Riser Clamps for a Power Plant in Rhode Island

Riser Clamp

Piping Technology & Products designed and fabricated 80,000 lb. capacity, Type-3 riser clamps for a power plant in Rhode Island. These riser clamps are designed for a 16″ pipe with 2″ flanges for added support.

Do you see a need for riser clamps in your piping system? Let us price them for you!
request-a-quote


Personnel Protection Shields for High Temperature Lines

March 21st, 2007 No comments
Personnel Protection Shields for High Temperature Lines

Personnel Protection Shields for High Temperature Lines

Personnel Protection Shields for High Temperature Lines

Personnel Protection Shields for High Temperature Lines

The personnel protection shields are used when insulating the line is not necessary, but operating temperatures require safeguarding personnel from coming into contact with the pipe. These shields are designed for 8″ pipe operating at 800°F, and are made of 304 stainless expanded steel rolled to a 20″ diameter.

Do you see a need for personnel protection shields in your piping system? Get pricing!
request-a-quote


PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

March 14th, 2007 No comments

 

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

 

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

PTFE, 25% Glass Filled, Slide Plates for a LNG Plant in Trinidad

Piping Technology & Products, Inc. designed and manufactured PTFE, 25% glass filled, slide plates for cable trays located on a floating structure. The slide plates are used to reduce the friction between the cable trays and the structural steel it is resting on. These particular slide plates are bonded to stainless steel backing plates that are bolted to the structure.

Want to learn more about slide plates? Instantly view a slide plate webinar today!


access-our-webinar-archives



24" and 42" Diameter Spectacle Blinds

February 28th, 2007 No comments
24" and 42" Diameter Spectacle Blinds

24" and 42" Diameter Spectacle Blinds

24" and 42" Diameter Spectacle Blinds

24" and 42" Diameter Spectacle Blinds

24" and 42" Diameter Spectacle Blinds

24" and 42" Diameter Spectacle Blinds

Piping Technology and Products, Inc. and SWECO Fab, Inc. designed and fabricated 24″ 300 # (ANSI rating), 2 1/2″ thick and 42″ 600 # (ANSI rating), 3 7/8″ thick carbon steel spectacle blinds. Spectacle blinds serve the same purpose as flow control valves at less the cost. Spectacle blinds either stop or continue the flow depending on which end is being utilized. PT&P/SWECO Fab. can supply these spectacle blinds in any material needed, such as stainless steel, Monel, Inconel and carbon steel. Smooth, mill, machined or serrated finish is also available upon request. PT&P/SWECO Fab. can produce this product in small quantities/sizes in 48 hours if needed.

Want to learn more about spectacle blinds? Instantly view a Sweco Fab webinar now!




access-our-webinar-archives



Trunnion Base ELL Supports for a Cryogenic Line

February 21st, 2007 No comments
Trunnion Base ELL Supports for a Cryogenic Line

Trunnion Base ELL Supports for a Cryogenic Line

 

Trunnion Base ELL Supports for a Cryogenic Line

Trunnion Base ELL Supports

- Cryogenic Trunnion Base ELL Supports
- Designed for temperatures of -300°F
- Insulated supports are for an LNG receiving, storage and regasification terminal

Do you have a requirement for Trunnion Base ELL supports? Let us price them for you!
request-a-quote


58" Floating Rings for a Process Plant

January 31st, 2007 No comments
58 Floating Rings for a Process Plant

58 Floating Rings for a Process Plant

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

Floating Ring in the Field

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

58" Floating Ring Being Installed

58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant

Floating Ring in the Field

58″ Floating Rings
- Sizes Range from 19″ I.D. to 91 1/2″ I.D.
- ASTM A-240 Grade 316H Stainless Steel
- 100% Dye Penetrant Tested on all Weld Seams

Do you have a requirement for floating rings in your piping system? Get pricing today!
request-a-quote


Categories: ASME/Miscellaneous Fabrication Tags:

Cryogenic Supports for an LNG Plant

January 24th, 2007 No comments
Cryogenic Supports for an LNG Plant

Cryogenic Supports for an LNG Plant

 

Cryogenic Supports for an LNG Plant

40 " Pipe - 8 1/2" Insulation Thickness

Cryogenic Supports for an LNG Plant

Close-up of Belleville Spring Washer

Belleville spring washers are installed on the studs to keep tension on the bolts due to pipe contraction at cryogenic temperatures. The top half of the cold shoe is constructed of 10 lb density polyurethane foam and the bottom half of the shoe is constructed of 20 lb density polyurethane foam to support the weight of the pipe.

Want to learn more about pre-insulated pipe supports? Instantly view a past webinar!


access-our-webinar-archives



Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy