Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla espaƱol
 
The Pipe Supports Blog

60" Diameter Air Tank for a Manufacturing Facility

July 22nd, 2005 No comments

 

60" Diameter Air Tank for a Manufacturing Facility

60" Diameter Air Tank for a Manufacturing Facility

Side View of Air Receiver Tank

Side View of Air Receiver Tank

Sweco Fab, Inc. recently fabricated an Air Receiver Tank for a Manufacturing Facility in Alabama. This 5,400 lbs tank measured 60″ 143″ tangent to tangent and was designed for 170 PSIG and 200 F. It was fabricated from SA516-70 carbon steel. The interior and exterior were painted with standard epoxy paint to provide an interior lining and exterior protection. The tank was hydrotested at 221 PSIG to ensure product quality.

Want to learn more about products from Sweco Fab? View a past webinar today!


access-our-webinar-archives



Categories: Pressure Vessels/Tanks Tags:

Positive Anchor Hot Shoe for Oil Refinery

July 15th, 2005 No comments
Positive Anchor Hot Shoe for Oil Refinery

Positive Anchor Hot Shoe for Oil Refinery

The hot shoes were constructed using high temperature insulation made from calcium silicate, lined with a ceramic fiber blanket in a steel cradle (A36 Carbon Steel). The shoes were designed for 1500 F and a vertical load range between 25,000 lbs and 32,000 lbs, and the BOP was 10″. The overall diameter including 7″ of insulation is 49 7/8″. Belleville washers are used to hold bolt tension in pipeline with high frequency vibration.

Want to learn more about hot shoes? View a past pre-insulated webinar today!


access-our-webinar-archives



Constants for Energy Plant in Louisiana

July 1st, 2005 No comments
Constants for Energy Plant in Louisiana

Constants for Energy Plant in Louisiana

Piping Technology & Products, Inc. custom designed and manufactured Type 200-C constant springboxes for an energy plant in Louisiana.

The constant measures 23 x 40 designed for an operating load capacity of 8,300 lbs. and a total travel range of 8. The constant is fabricated of A36 carbon steel. To ensure quality,
standard load and travel tests were performed prior to shipping.

Do you see a need for constant spring supports in your piping system? Get pricing today!
request-a-quote


Structural Support Units for a Power Plant in California

June 24th, 2005 No comments
Structural Support Units for a Power Plant in California

Structural Support Units for a Power Plant in California

Piping Technology and Products, Inc. recently designed and fabricated two structural support units for a power plant in California.

The structural supports pipes are made of A106 Gr. B; the beam, angle and plate are made of carbon steel. They have an overall height of 11 feet with a weight of 672 lbs. The purpose of these products is to support a 3 inch intermediate pipe.

Do you see a need for structural supports in your current job? Get pricing today!
request-a-quote


Pipe Shoes for an Energy Plant in Canada

June 17th, 2005 No comments

 

Pipe Shoes for an Energy Plant in Canada

Pipe Shoes for an Energy Plant in Canada

Pipe Shoes for an Energy Plant in Canada

Isometric View of Shoes

Piping Technology & Products, Inc. recently designed and manufactured 566 pipe shoes for an energy plant in Canada.

These fabricated pipe shoes are manufactured to support pipes. The pipe shoes are fabricated out of A36 carbon steel with sizes ranging from 12 to 36. They have an overall weight of 134,000 lbs.

Do you require pipe shoes like those described above? Let us price them for you now!
request-a-quote


68 Sliding Cold Shoes with Lateral Restraint

June 10th, 2005 No comments
68 Sliding Cold Shoes with Lateral Restraint

68 Sliding Cold Shoes with Lateral Restraint

Piping Technology and Products, Inc. recently fabricated and designed several sliding cold shoes with lateral restraint for a river site in Georgia. The sliding cold shoes have a frame of A36 carbon steel. These were designed to support pipes of 14 to 36 in diameter, insulated with 4.5 to 5 in thick layers of polyurethane foam.

Want to learn more about cold shoes? View a past pre-insulated support webinar!



access-our-webinar-archives



Eight Custom-Built Variable Springs for a Power Plant

June 3rd, 2005 No comments
Eight Custom-Built Variable Springs for a Power Plant

Eight Custom-Built Variable Springs for a Power Plant

All of the spring components are made of A4150H and carbon steel. Per customer’s request, a two coat epoxy paint was applied to the springs. The Type-A variable spring assemblies measure 22″ x 79″ with an installed load of 45,000 lb., operating load of 56,000 lb., and a downward travel of 5″. The Type-C assemblies measure 22″ x 89″ with an installation load of 38,000 lb., operating load of 47,000 lb., and a downward travel of 5 1/2″. Each spring coil was tested to insure the wire diameter, coil height, and spring rates.

Do you see a need for variable springs in your piping system? Get a price quote today!


request-a-quote


Eight Polyurethane Pipe Rollers for a Gas Plant

May 20th, 2005 No comments
Eight Polyurethane Pipe Rollers for a Gas Plant

Eight Polyurethane Pipe Rollers for a Gas Plant

Piping Technology & Products, Inc. designed and manufactured eight polyurethane pipe rollers for a gas plant in California. These 24 non-conductive pipe rollers are fabricated from polyurethane. They were pre-tested for an operation load of 6,100 lbs. The purpose of these polyurethane pipe rollers is to support gas piping where a non-conductive support is required.

Do you require pipe rollers in your piping system? Let us price them for you today!
request-a-quote


Eight Cold Shoes for Plant in Egypt

May 13th, 2005 No comments
Eight Cold Shoes for Plant in Egypt

Eight Cold Shoes for Plant in Egypt

Eight Cold Shoes for Plant in Egypt

Unassembled Cold Shoes

Piping Technology & Products, Inc. custom designed eight cold shoes for a plant in Egypt. The pipe diameters of these shoes range from 10 to 18, and they weigh up to 2300 lbs. These cold shoes were designed to support a vertical cold line. The maximum load for this product is 28,000 lbs. These products were made from Micarta G10, A240 304L and A36.

Want to learn more about cold shoes? View a past pre-insulated webinar today!


access-our-webinar-archives



Custom Designed and Manufactured Box Design Constants

April 29th, 2005 No comments
Custom Designed and Manufactured Box Design Constants

Custom Designed and Manufactured Box Design Constants

Custom Designed and Manufactured Box Design Constants

Front View

These constants are manufactured from A36 carbon steel and measure 11″ x 29″ x 61″. Total weight of each constant is 430 lb. The loaded capacity is 2,160 lb. and the maximum travel is 15″. Standard load and travel test were done to ensure quality and performance. The turn around for this product was four days.

Custom Designed and Manufactured Box Design Constants

Side View

 

 

 

 

 

 

Do you require custom constants for your piping system? Get a price quote today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy