Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Custom Designed Pipe Clamp and Sway Strut Assemblies for an Ethane Cracker Facility in Texas

December 12th, 2016 Comments off

Custom Designed Pipe Hanger and Pipe Clamp Assemblies for an Ethane Cracker Facility in Texas

Type: Pipe Clamp and Sway Strut Assemblies
Design: Operating load: 99,650 lb. | Temperature: 550°F
Material: A36 Carbon Steel
Size: Clamps: 149″ L x 14″ W x 2″ T | Load Bolt: 4-1/2″ | 68″ Dia. Pipe

Piping Technology & Products custom designed pipe clamp and sway strut assemblies assemblies for an ethane cracker facility in Texas. The clamps are designed for a 68″ diameter pipe using a bar size of 149″ long x 14″ wide x 2″ tall. The load bolt size is 4-1/2″ and the inside bolts, rods, nuts, and turnbuckle are 4″ diameter. The assemblies are completely fabricated from A36 carbon steel, and designed for an operating temperature of 550°F with a load capacity up to 99,650 lb. A visual inspection test with sample pipe and dimensional check were conducted prior to shipment.

Hydraulic Snubbers for an Ammonia Plant in Louisiana

November 23rd, 2016 Comments off

Hydraulic Snubbers for an Ammonia Plant in Louisiana

Type: Hydraulic Snubbers
Design: 3,000-15,400 lb load/5″-12″ stroke
Material: Carbon Steel
Size: 31″ up to 148″ pin-to-pin and cylinder diameters from 2.5″ to 5″

Piping Technology & Products designed these hydraulic snubbers for an ammonia plant in Louisiana. The snubbers ranged in length from 31″ up to 148″ pin-to-pin and cylinder diameters from 2.5″ to 5″. They are designed for an operating load raging from 3,000 lb. to 15,400 lb. and have a 5″ to 12″ stroke. Hydraulic snubbers are designed to protect the piping system when a sudden, heavy load is applied (such as an earthquake of high intensity), which can cause serious vibrations leading to damage and possible failure of the piping system.

Sway Strut and Pipe Clamp Assemblies Designed for an Energy Combustibles and Lubricants Facility

November 18th, 2016 Comments off

Sway Struts with Pipe Clamps for Energy Combustibles and Lubricants Facility in Argentina

Type: Sway Strut and Pipe Clamp Assemblies
Design: 4,500 lbs load
Material: A-36 Carbon Steel
Function: Let the pipe sway within a certain radius

Piping Technology & Products designed these Fig.2110F sway struts and pipe clamp assemblies for an energy combustibles and lubricants facility in Argentina. The sway struts are 60″ in length with clamp sizes of 16″ and 12″ diameters. All components were fabricated from A-36 carbon steel. They are designed for an operating load of 4,500 lb. The sway struts are designed to let the pipe sway within a certain radius.

Work-Life Success at Piping Technology and Products

November 14th, 2016 Comments off

PT&P valued employees discuss the importance of a healthy and flexible work environment

Categories: Piping Technology News Tags:

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

November 7th, 2016 Comments off

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

Type: Pipe Roller Stands
Design: 1,000 lb. Load | 30″ Dia. Pipe | 18-3/4″ x 13″ x 10-3/16″ BOP
Material: Stainless Steel
Function: For support of piping that expands and contracts longitudinally and where vertical adjustment is not necessary.

Piping Technology & Products, Inc. designed pipe roller stands fabricated from stainless steel for a wastewater treatment plant. Each roller has two spring housings with eight springs in each. They are designed for an operating load of 1,000 lb. on a 30″ diameter pipeline. The rollers measure 18-3/4″ x 13″ x 10-3/16″ BOP and went through quality control inspection and tests prior to shipment.

Increasing Productivity through Automation (Robotic Welding Machine)

October 25th, 2016 Comments off

Adjustable Pipe Stands Designed for a Crude Oil Terminal in Texas

October 24th, 2016 Comments off

Adjustable Pipe Stands Designed for a Crude Oil Terminal in Texas

Type: Adjustable Pipe Stands / Saddles
Design: 3″ to 25″ Dia. | +/-2″ Adjustment
Material: Carbon Steel with a HDG Finish
Function: Allow adjustment after expansion and contraction

Piping Technology & Products, Inc. designed and fabricated fifty-seven adjustable pipe stands for a Crude Oil Terminal in Texas. All the supports are fabricated from carbon steel with a hot-dipped galvanized finish. They are designed for 3″ to 25″ diameter pipelines with +/- 2″ of adjustment. Each base plate has been pre-drilled to accept anchor bolts provided at the site. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline.

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

October 11th, 2016 Comments off

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

Type: Heavy Duty Pipe Saddles
Design: 60″ Dia. | 23-5/8″ Length | 5-18″ from BOP
Material: Carbon Steel with a HDG Finish
Testing: Visual | Sample Pipe | Dimensional

Piping Technology & Products, Inc. designed and manufactured these heavy duty pipe saddles for the Ethylene Plant Project in Texas. The saddles are fabricated from A36 carbon steel with a hot-dipped galvanized finish and designed to support pipes up to 60″ in diameter. They measure 23-5/8″ in length and 5-1/8″ from BOP. Standard Q.C., visual inspection with a sample pipe and dimensional tests were performed prior to shipment.

Variable Spring Supports Designed for a Furnace Application in Oklahoma

September 26th, 2016 Comments off

Variable Spring Supports Designed for a Furnace Application in Oklahoma

Type: Variable Spring Supports
Design: 1,765 lb. Load | +/- 5% Spring Rate
Material: Carbon Steel with Red Oxide Primer
Testing: Standard Spring Rate & Calibration Tests

PT&P custom designed variable spring supports for a furnace application at a Nitrogen Facility in Oklahoma. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The spring supports are designed to support loads up to 1,765 lb. With a spring rate calibrated to be within +/- 5% of the theoretical value.

Single Expansion Joints Product Video

September 16th, 2016 Comments off

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy