Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Custom Anchor Cold Shoes for a Company in Texas

June 25th, 2004 No comments
Custom Anchor Cold Shoes for a company in Texas

Custom Anchor Cold Shoes for a company in Texas

Piping Technology & Products, Inc. recently fabricated several anchor shoes designed for cold operating temperatures of -20°F. These shoes are fixed anchors to prevent movement of pipes spanning less than 25′-0 long. The shoes are made from A240 304 stainless steel in line sizes ranging from 4 to 16. An allowance for 2 to 4 of insulation material was provided.

Do you require anchor cold shoes like those described above? Get pricing today!
request-a-quote


5,800 lb. load Type F Variable Springs

June 18th, 2004 No comments
5,800 lb. load Type F Variable Springs

5,800 lb. load Type F Variable Springs

Piping Technology and Products, Inc. recently designed and fabricated eighteen 1,200 lb to 5,800 lb. load PTP-2 type F size 100 to 150 variable springs for a company in South Korea. These variable springs fabricated from carbon steel are designed for 200°F. They have an overall height of 9.5″ to 11.5″ and are designed for a travel range of 1/8″ upward to 3/16″ downward. Per the customer’s request the variables were coated with a custom paint. To ensure quality, standard load testing was performed on the variables prior to shipping.

Want to learn more about variable springs? Instantly watch a variable spring webinar now!



access-our-webinar-archives



Pig Receiver with Saddle Supports

June 4th, 2004 No comments

Pig Receiver with Saddle Supports

Pig Receiver with Saddle Supports

Sweco Fab, Inc. recently fabricated a Pig Receiver Class 600 with saddle supports for an industrial company in Texas.  The pig receiver is composed of a 24 dia. minor barrel and a 30 dia. major barrel with 1 thick walls. It is approximately 250 in length and weighs 8,200 lb. The major and minor barrels are fabricated from API-5L Gr.B, X42 and SA106B material, respectively. All other items are fabricated from SA105, SA106B, and SA-36 as applicable. The receiver is designed per ASME B31.8 with a 0.72 Design Factor and NACE MP-01-75. The design pressure is 1480 PSIG at 125°F.

Do you see a need for a pig launcher or receiver in your piping system? Get pricing now!
request-a-quote


Thirty PT&P Fig. 70A Clamps for a Power Plant

May 28th, 2004 No comments
Thirty PT&P Fig. 70A Clamps for a Power Plant

Thirty PT&P Fig. 70A Clamps for a Power Plant

Piping Technology and Products, Inc. recently designed and fabricated thirty PT&P Fig. 70A clamps to fit 14″ to 18″ pipes at a power plant in Florida. These clamps are designed for suspension of hot pipe lines where there is a high temperature and great thermal movement. The clamps are fabricated from SA 387 Gr. 22 alloy steel for temperatures of 1065F and loads of 8,000 lb. to 25,000 lb. These 160 to 395 lb. clamps have dimensions checked and a fit up test preformed prior to shipping.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!


access-our-webinar-archives



44,000 lb. load Horizontal Upthrust Constant

May 21st, 2004 No comments

44,000 lb. load Horizontal Upthrust Constant

44,000 lb. load Horizontal Upthrust Constant

Piping Technology & Products, Inc. recently fabricated horizontal upthrust constants for loads ranging from 24,000 lb. to 44,000 lb.  These Fig. PTP 200 type U constants are designed for a travel range of 4″ to 4 ½”. They are fabricated from A36 carbon steel with dimensions ranging from 60″x52″ to 80″x52″. To meet customer specified installation heights, angles were added to the base of each constant. Load testing was performed to ensure product quality prior to shipping.

Want to learn more about constant springs? View a past constant webinar today!


access-our-webinar-archives



Riser Clamp Assemblies with Neoprene Lining

May 7th, 2004 No comments
Riser Clamp Assemblies with Neoprene Lining

Riser Clamp Assemblies with Neoprene Lining

Piping Technology and Products, Inc. custom designed eight sets of riser clamp assemblies for an oil rig in the Gulf of Mexico. These riser clamp assemblies were fabricated from API 2H GR. 50 carbon steel. They were designed to support vertical pipe lines on an offshore platform. Each set equipped with a neoprene lining consists of two clamps and a clamp stand. Several coats of marine paint finish were applied to the assemblies to prevent corrosion due to high salt water content and open air exposure.

Do you require riser clamps in your piping system? Get pricing today!

request-a-quote


240 Welded Eye Rods for an Ammonia Plant

April 30th, 2004 No comments
240 Welded Eye Rods for an Ammonia Plant

240 Welded Eye Rods for an Ammonia Plant

Piping Technology and Products, Inc. designed and manufactured 240 PT&P Figure 110 welded eye rods for an ammonia plant in Saudi Arabia. The rods will be attached to Type A variable springs designed to support loads from 850 lb. to 13,300 lb. Manufactured from A-36 carbon steel, the rods are 3/4 to 2 in diameter and range in length from 68 to 95. To prevent contamination at high temperatures, a red oxide primer with an alkyd topcoat was applied to the rods as per the customer’s request. Prior to shipment, a 100% dye-penetrant test was performed to ensure quality.

Do you have a requirement for welded eye rods in your current job? Get pricing now!
request-a-quote


Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

April 16th, 2004 No comments
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan.  These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.

Do you see a need for hold down clamps in your piping system? Get pricing today!
request-a-quote


90,000 lb. Load Big Ton Springs for a Chemical Plant

April 9th, 2004 No comments

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

Name Plate Indicates Hot/Cold Loads

Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.

Do you require big ton springs in your current or future job? Get pricing today!
request-a-quote


April 2004 News

April 4th, 2004 No comments

Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to info@pipingtech.com or 1+713-731-8640 (fax) for an immediate quote.

PHDS Software

Software Features

  • Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
  • Use a built-in function to submit drawing data to PT&P for quotation

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy